Future Electronics PSoC 3 User manual

www.FutureElectronics.com
PSoC® 3
QUICK START GUIDE
PSOC3-DEV-BOARD-Rev2
Contact your local Future Advanced Engineering Team
with your design requirements today!
www.FutureElectronics.com 1-888-880-3449
PSoC is a registered trademark and Creator is a trademark of Cypress Semiconductor Corp.
Analog Input
Programming USB Interface
Current Features:
- CapSense
- RGB Color Mixing
- USB Communication
Recently added features:
- Analog Input
- JTAG Debugging
- Additional Expansion Connector
to allow for parallel application
development
User USB Interface
FX2LP Programming Device
FX2LP / MiniProg Selector
JTAG Connector
Boost Regulator
Expansion Connectors
PSoC 3
Reset ButtonTouch Pad
New & Improved!

QUICK START GUIDE
PSoC® 3 1 2
www.FutureElectronics.com
Verify the kit contents Connect the PSoC 3 board to the
computer using a USB cable attached
to programming connector
4
Move your finger over the touch
pad to see the LED change color
Using a small screwdriver, move the
potentiometer from right to left and
see the blue LED change intensity
5
Download & install PSoC CreatorTM 1.0
and start having fun with PSoC 3 !
www.cypress.com/go/psoccreator
PSoC is a registered trademark and Creator is a trademark of Cypress Semiconductor Corp.
Contact your local Future Advanced Engineering Team
with your design requirements today!
www.FutureElectronics.com 1-888-880-3449
PSOC3-DEV-BOARD-Rev2
3