Future Mobility Healthcare PRISM Supreme User manual

PRISM Supreme Air Cushion
Installation and Operating Instructions
NOTE: Check all parts for shipping damages before using. In case of damage, do NOT use the
equipment. Contact the Equipment Supplier for further instructions.
WARNING
DO NOT install this equipment ithout first reading and understanding this instruction booklet. If you
are unable to understand these instructions, contact a healthcare professional, dealer or technical
personnel before attempting to install this equipment -
other ise, injury or damage may occur.
NOTICE
Information contained ithin this document is subject to change ithout notice.
IMPORTANT
The Prism Supreme Air Cushion is a high-pressure relief cushion but NOT designed for use in the
treatment of pressure sores, or for those individuals at risk of developing pressure sores. Your
Therapist and/or Physician should be notified if you have any questions regarding pressure relief etc.
Introduction
The Supreme Air Cushion is designed for clients ith challenging positioning and postural
support requirements. Using inflatable air inserts may allo adjusting seat cushion height in
four different areas.
Fig.1 (covers not sho n)

ATTACHING THE PRISM SUPREME AIR CUSHION TO SEATING SURFACE
The Prism Supreme Cushion attaches to the wheelchair-seating surface through the use of
hook and loop fastening strips.
1. If the heelchair has loop attachment strips, verify that the double-sided hook strips are securely
attached to the loop attachment strips on the bottom of the cushion.
2. Align the front edge of the cushion ith the front edge of the seating surface. NOTE: The zipper is
located on the rear of the cushion.
3. Secure the cushion on the seating surface; making sure that the hook is securely attached to the
strips of loop on the cushion cover and the chair.
4. If the heelchair has hook attachment strips, remove the double-sided hook strips from the cushion.
5. Continue ith Steps 2 & 3.
6. To ensure proper pressure relief, verify that the user’s IT’s are situated in the visco pressure relief
foam area
To Adjust Air Inserts
Inflate air inserts by squeezing bulb valve until positioning is attained. To adjust area 1 connect bulb to
fitting 1, to adjust area 2 connect bulb to fitting 2, to adjust area 3 connect bulb to fitting 3, to adjust
area 4 connect bulb to fitting 4 (Fig.1).
Remove air from insert by pressing button on bulb valve.
MAINTENANCE - Cle ning Instructions
Foam
DO NOT immerse the Prism Supreme Air Cushion in ater, instead, it should be iped do n ith a
slightly dampened cloth. If the foam becomes contaminated due to incontinence, it SHOULD be
replaced.
Covers (Inner & Outer)
USE mild detergent and machine- ash cold using gentle cycle. DO NOT USE fabric softeners or
bleach. Lo tumble dry or air dry ONLY.
The cover is designed to protect the foam against a user's incontinence and to provide fire retardency,
so the Prism Supreme Cushion must not e used without its cover. If the cover is torn, it must e
replaced.
NOTE: Check that the cushion covers have the zipper at the rear bottom edge hen
reinstalling.

WARRANTY
This arranty is extended only to the original purchaser/user of our products.
Future Mobility Healthcare Inc. arrants this seating product to be free from defects in materials
and orkmanship for t o (2) year on cushions and 90 days on covers upon normal usage by
original purchaser. If ithin this arranty period the product shall be proven to be defective, such
product shall be repaired or replaced, at Future Mobility Healthcare Inc. discretion. Future Mobility
Healthcare Inc. sole obligation and your exclusive remedy under this arranty shall be limited to
the repair and/or replacement of the product or its parts. This arranty does not include any labour
or shipping charges incurred in replacement part installation or repair of any product.
For arranty service, please contact the dealer from hom you purchased your Future Healthcare
Inc. product. In the event you do not receive satisfactory arranty service, please rite directly to
Future Mobility Healthcare Inc. at 3223 Orlando Drive, Mississauga, Ontario, L4V 1C5. Provide the
dealer's name, address, model number, date of purchase and indicate the nature of the defect.
DO NOT return products to Future Mobility Healthcare Inc. our prior consent. The defective unit or
parts must be returned for arranty inspection ithin thirty (30) days of the return authorization
date. (Future Mobility Healthcare Inc. ill issue a return authorization number). Please prepay all
shipping charges; C.O.D. shipments ill be refused.
LIMITATIONS and EXCLUSIONS: This arranty shall not apply to problems arising from normal
ear or failure to adhere to the enclosed instructions. Products subjected to negligence, accident,
improper usage, maintenance or storage; or products modified ithout Future Mobility Healthcare
Inc. ritten consent including, but not limited to : modification through the use of any unauthorized
parts or attachments; products damaged by reason or repairs made to any component ithout the
specific consent of Future Mobility Healthcare Inc., or products repaired by anyone other than a
Future Mobility Healthcare Inc. dealer. Such evaluation shall be determined by Future Mobility
Healthcare Inc..
The foregoing arranty is exclusive and in lieu of all other expressed arranties. It shall not
extend beyond the duration of the expressed arranty provided herein and the remedy for
violations of any implied arranty shall be limited to repair or replacement of the defective product
pursuant to the terms contained herein. Future Mobility Healthcare Inc. shall not be liable for any
consequential or incidental damages hatsoever.
This arranty shall be
extended to comply
ith all provincial la s
and requirements.
3223 Orlando Drive
Mississauga ON L4V 1C5
Tel: [phone]
Fax: [phone]
e-mail: [e-mail]
.future-mobility.com