Future Systems SecuwayCard 2000 User manual






























DASTEK EMC Lab,
DASTEK EMC Lab,DASTEK EMC Lab,
DASTEK EMC Lab, 204 Chuge-Ri Yangji-Myeon Yongin-Shi Kyunggi-Do,Korea
Tel:[phone] Fax: [phone]









  






 !"#$%!&'#() *"+##()#")#,*(,-.%(,)./.'&012!) ) #0!'!)"-.3*0*"",!4!)*0
,#5!/#&%3"%*()).&*3).-) #%0#" #"#0!'!)"*3#,#"!4(#,).&3.5!,#3#*".(*+0#
&3.)#/)!.(*4*!(") *3'-%0!()#3-#3#(/#!(*3#"!,#()!*0!(")*00*)!.( !"#$%!&'#()4#(#3*)#"
%"#"*(,/*(3*,!*)#3*,!.-3#$%#(/1#(#341*(,!-(.)!(")*00#,*(,%"#,!(*//.3,*(/#2!) 
) #!(")3%/)!.("'*1/*%"# *3'-%0!()#3-#3#(/#).3*,!./.''%(!/*)!.(.2#5#3) #3#!"
(.4%*3*()##) *)!()#3-#3#(/#2!00(.).//%3!(*&*3)!/%0*3!(")*00*)!.(-) !"#$%!&'#(),.#"
/*%"# *3'-%0!()#3-#3#(/#).3*,!..3)#0#5!"!.(3#/#&)!.(2 !/ /*(+#,#)#3'!(#,+1
)%3(!(4) ##$%!&'#().--*(,.() #%"#3!"#(/.%3*4#,).)31)./.33#/)) #!()#3-#3#(/#+1
.(#.3'.3#.-) #-.00.2!(4'#*"%3#"

6#.3!#().33#0./*)#) #3#/#!5!(4*()#((*
6(/3#*"#) #"#&*3*)!.(+#)2##() ##$%!&'#()*(,3#/#!5#3
6.((#/)) ##$%!&'#()!().*(.%)0#).(*.!3/%!),!--#3#(/#-3.' 
  ) *)).2 !/ ) #3#/#!5#3!"/.((#/)#,
6.("%0)) #,#*0#3.-*(#7&#3!#(/#,3*,!.8)#/ (!/!*(-.3 #0&

 !"%(!)2*")#")#,2!) " !#0,#,/*+0#".() #&#3!& #3*0,#5!/#" !#0,#,/*+0#"
'%")+#%"#,2!) ) #%(!)).!("%3#/.'&0!*(/#

 #'*(%-*/)%3#3!"(.)3#"&.("!+0#-.3*(13*,!..3!()#3-#3#(/#/*%"#,+1
%(*%) .3!9#,'.,!-!/*)!.(").) !"#$%!&'#()%/ '.,!-!/*)!.("/.%0,5.!,) #%"#3:"
*%) .3!)1)..&#3*)#) ##$%!&'#()

Part 1
SecuwayCard 2000
Installation

1-1
Chapter 1 SecuwayCard 2000?
The SecuwayCard 2000 is a part of the SecuwaySuite 2000
package as mentioned previously on this manual. Cooperating with the
SecuwayCenter 2000, SecuwayGate 2000,
SecuwayClient 2000 and SecuwayCard 2000 provides the
End-to-End total security solution from sender to receiver.
SecuwayCard 2000 provides Network communication security
service that encrypts/decrypts the network packet using key management
method based on IPSEC. SecuwayCard 2000 also gives you the
hardware security token function that encrypts/decrypts the hard disk,
floppy disk and booting restriction program which allows only authorized
user to use the system from booting. The booting restriction program is
optional part and you can install it regardless of SecuwayCard 2000.
SecuwayCard 2000 have the security policy and the key received
from SecuwayCenter 2000 administrator. SecuwayCard 2000
uses the key and security policy for network communication. You can use
the security function easily without any other operation because it is
provided automatically only by installing the PCMCIA card on the
computer with which you use the SecuwayCard 2000.
SecuwayCard 2000 can be easily installed and used transparently
not only on the Desktop PC but also Note PC because its hardware is
provided with the type of PCMCIA card.

1-2 Chapter 1
SecuwayCard 2000?
SecuwayCard 2000
Features
SecuwayCard 2000 has the following features.
Obey the IPSEC
SecuwayCard 2000 obeys the IPSEC(Internet Protocol Security)
while doing the TCP/IP communication. And so, the user can send the
encrypted data safely to the destination when using the application.
Communication data encryption
SecuwayCard 2000 consists of AH(Authentication Header) and ESP
(Encapsulated Security Payload). AH authenticates the sending place of IP
packet and check if the packet is transformed illegally or not. ESP provides
the security service by encrypting the packet data.
PCMCIA type of security token
SecuwayCard 2000 provides with the transparency on the user
security circumstances and is easily installed and used on the Desktop PC
or Note PC that has PCMCIA card reader because its hardware is provided
as PCMCIA type of security token.
File/Folder Encryption/Decryption
If you log on the SecuwayCard 2000 Manager program, you can
encrypt or decrypt the file or folder on the Windows Explorer without
running any other program. You can select the way to encrypt or decrypt
the file or folder between the “Password Method Encryption” and “Auto
Encryption”. “Auto Encryption” is the way to use the key received from
SecuwayCenter 2000 for encrypting or decrypting the file or folder.

1-3
Various password algorithm/authentication algorithm
SecuwayCard 2000 adopts various password algorithm and
authentication algorithm while doing the network communication.
System locking function using screen saver
SecuwayCard 2000 provides the system locking function as running
the screen saver if you leave the computer or do not input any other keys
in restricted time. If the screen saver is running, you can use the system
only after successful authentication using the permitted password.
Various interfaces
You can set the SecuwayCard 2000 user interface in 3 ways by
cooperating with the SecuwayCenter 2000. If you want to hide the
setting status of the SecuwayCard 2000 from the user, you can
select the item that has no user interface on the SecuwayCenter
2000 and send it online.
TamperProof hardware security
If unauthorized user takes apart the SecuwayCard 2000 hardware or
tries to access to the memory, the password algorithm, key for
encryption/decryption and other security information saved in
SecuwayCard 2000 is deleted automatically to protect from leaking
information.
Log saving function
The user executing circumstances of the SecuwayCard 2000
Manager program is saved on the log and so the manager can easily
monitor or track the system.

2-1
Chapter 2 Before Setting Up the
SecuwayCard 2000
This chapter tells you the system requirements to set up the
SecuwayCard 2000 and some notices you should know before
setting up the SecuwayCard 2000.
System Requirements
The system requirement to setup the SecuwayCard 2000 is like the
following.
!" 486 Mhz CPU or higher PC
!" Windows 95, Windows 98, Windows Me (Installed in PC)
!" Networking environment using Microsoft TCP/IP protocol stack
!" Desktop PC or Note PC installed with PCMCIA card reader
If you use Note PC, you can install the SecuwayCard 2000 in
your Note PC without installing any other application program
because PCMCIA card reader is already installed in Note PC
basically. If you use Desktop PC, you should install the PCMCIA
card reader program before installing the SecuwayCard
2000 because PCMCIA card reader is not installed in Note PC
basically.

2-2 Chapter 2
Before Setting Up the SecuwayCard 2000
Checking the contents of the package
When you unpack the SecuwayCard 2000 package box, you can find
out the following things in the box. If any of them is not in the box or there
is anything to be changed because it is damaged, contact to the dealer.
!" SecuwayCard 2000 card (PCMCIA type)
!" SecuwayCard 2000 program CD that contains the
SecuwayCard 2000 manager program.
!" This guide

3-1
Chapter 3 Setting Up the SecuwayCard
2000
This chapter shows you the way to install the hardware and software of the
SecuwayCard 2000.
Installing the
SecuwayCard 2000
in the
computer
Let’s see the way to install the SecuwayCard 2000 in the Note PC or
Desktop PC.
Installing the SecuwayCard 2000 in the Note PC
If you are to install the SecuwayCard 2000 in the Note PC, follow
the steps below
This guide describes the way to install the SecuwayCard
2000 in the Note PC in which Windows Me operating system is
installed as an example.
#Insert the SecuwayCard 2000 in the PCMCIA card slot of Note
PC while the power of Note PC is off.
$Turn on the power of Note PC and then the Windows Me operating
system shows you the following message after finding out the
SecuwayCard 2000 as the new hardware.

3-2 Chapter 3
Setting Up the SecuwayCard 2000
%In a few seconds, the installation process for the SecuwayCard
2000 driver is started.
Select the “Automatic search for a better driver(Recommended)” and
click [Next>] button.
&After the operating system find out the driver for SecuwayCard
2000 on the CD-ROM and then the following message is displayed.
If you click [Next>] button, then the installation process of the
SecuwayCard 2000 driver is started.

3-3
'After the copying process of the SecuwayCard 2000 driver
installation program is completed, the following message is displayed.
Click the [Finish] button.
(The final step of driver installation process is started with the following
message.
To click [Yes] and reboot the computer is recommended at this time.
After rebooting the computer, the installation process of the
SecuwayCard 2000 driver program is finished.

3-4 Chapter 3
Setting Up the SecuwayCard 2000
)After finishing the installation process of the SecuwayCard 2000
driver program, select the menu <Start> *<Settings> *<Control
Panel>.
+Then click the icon <System> on the Control Panel. On the <System
Properties> screen, select <Device Manager> tab. Then you can find
out the SecuwayCard 2000 installation status under the
“PCMCIA socket” item like the following.
Now the SecuwayCard 2000 hardware installation process on
the Note PC is completed.

3-5
Installing the SecuwayCard 2000 in the Desk top PC
Generally, most of the Desktop PC has no built in PCMCIA card reader.
And so, you must install the PCMCIA card reader on the Desktop PC
before installing the SecuwayCard 2000.
PCMCIA card reader is provided with ISA type, PCI type and so
on. The PCMCIA card installation program is provided by the
vender or operating system. If the installation program is
provided by the operating system, the way to install it is very
simple. If the operating system provides the PnP(Plug & Play)
function, you can install it just by insert the card in the slot.
After installing the PCMCIA card reader, follow the steps of the
installation process of the SecuwayCard 2000 hardware on the Note
PC.

3-6 Chapter 3
Setting Up the SecuwayCard 2000
Installing the
SecuwayCard 2000
software
driver
If you have finally installed the SecuwayCard 2000 hardware in your
Note PC or Desktop PC, then you should install the software driver like
the following.
This guide shows you the case of using the operating system
Windwos ME as an example. If you use the Windows 95 or
Windows 98, the screen displays of the SecuwayCard 2000
installation process may be slightly different from those of this
guide.
#Turn on the Note PC in which you are to install the SecuwayCard
2000 program and run the Windows Me.
When you complete the installation of the SecuwayCard
2000 program, you should reboot the computer. So, if you’re
running the other programs, you’d better save and exit them
safely before installing the SecuwayCard 2000 program.

3-7
$SecuwayCard 2000 program is provided with CD. Insert the
SecuwayCard 2000 driver CD in the CD-ROM drive of PC. And
click “setup.exe” among the files on the CD. Then the following screen
is displayed.
%Click [Next] button and then the <Software License Agreement> is
displayed. Read the text very carefully and you agree to the contents,
click [Yes] button.
&<Choose Destination Location> screen which is to select the
destination folder is displayed.
Basically the folder “C:\…\Program Files\FUTURE\SecuwayCard
2000” is selected but you can change the folder as you want. If you
want to select other folder, click [Browse…] button and select the
folder you want. After selecting the folder, click [Next>] button.

3-8 Chapter 3
Setting Up the SecuwayCard 2000
'“Select Program Folder” screen is displayed. The screen is to add the
program folder for the SecuwayCard 2000 program. Basically,
“SecuwayCard 2000” is selected but you can select one of
existing folders or set the new one.
After setting the folder, click [Next>] button.
(Then the program copying is started. While copying the program, the
copying ratio screen is displayed.
After copying the files, the steps for installing the L2TP(Layer2
Tunneling Protocol) driver may be displayed. In this case, do not
stop it and just wait. In the case that the steps for installing the
L2TP driver is not disaplayed, you should also stop it and just wait
because the driver is not necessary on your circumstances.

3-9
)After completing the copy process, <Setup Complete> screen is
displayed.
To use the SecuwayCard 2000 normally, you should reboot the
computer at this time. Select <Yes, I want to restart my computer
now> and then click [Finish] button. Then the computer is rebooted.
After the rebooting, <Security Register Wizard> screen is displayed.
You can log on the SecuwayCard 2000 Manager program and set
the administration process only after you registering the security
through the <Security Register Wizard> The way to register
the
security through the <Security Register Wizard> is introduced on the
Chapter 4 of this guide.

4-1
Chapter 4 Online Security Registration
This chapter guides you to precede the Online Security Registration after
installing the SecuwayCard 2000.
Online Security Registration?
You should do the Online Security Registration process in order to use the
user authentication and data encryption function provided by the
SecuwayCard 2000.
When you complete the online registration, you can receive the security
key from the SecuwayCenter 2000 that is necessary for the user
authentication and data encryption. You can communicate with other hosts
using this security key after online security registration
!The <Security Register Wizard> program which is used for
online security registration is executed automatically once only
after installing the SecuwayCard 2000 program and
rebooting the computer. If you do not online registeration at
this time, you can execute the <Security Register Wizard>
program manually like this. Execute <Start> *<Program>
*<SecuwayCard 2000> *<SecuwayCard 2000
Manager program> and then the <Security Register
Wizard> program is displayed.
!If you are using the SecuwayCard 2000 Manager program
want to remove and reinstall the program, you should do the
online security registration again.

4-2 Chapter 4
Online Security Registration
Now let’s see the steps for online security registration using the
<Security Register Wizard> program.
#After copying the installation program and rebooting the system, the
SecuwayCard 2000 displays the <Security Register Wizard>
screen.
Click [Next>] button after reading the “Security Token Initialize”
information on the screen.
$Then the following screen to select the Security Register Method is
displayed. You should move the mouse while the following screen is
displayed.
There are two kinds of ways for security registration.
!"Offline Regist (Using file for security token setup) : It is the way to
regist security using the diskette received from the
SecuwayCenter 2000.
!"Online Regist : It is the way to send and receive the key via
network that is necessary for security communication.
Select <Online Regist> on the <Security Register Method> and click
the [Next>] button.

4-3
If the SecuwayCard 2000 is not installed in your computer
when you register the security or the computer can not perceive
the SecuwayCard 2000 which is installed, the following
screen is displayed.
After check and reinstall the SecuwayCard 2000 normally
and click [Token Query], then you can do the following steps
%The following step is to input properties for Online Security
Registration.
The meaning and available input values of each item are like the
following.