FUXTEC FK-E1SS20 Product information sheet

3
Content
Introduction and safety………………………………………………….………………………………..3
Intended use……………………………………………………………………………….……….3
General safety instructions for power tools………………………………….……..3
Workplace Safety………………………………………………………………………………..3
Electrical Safety…………………………………………………………………………………..4
Safety of Persons…………………………………………………………………………………4
Use and treatment of the power tool………………………………………………….5
Use and handling of the cordless tool…………………………………………….……6
Safety Instructions for Cordless Reciprocating Saw…………………………….…..6
General Safety Instructions………………………………………………………………...6
Before Use………………………………………………………………………………………7
During Operation…………………………………………………………………………….7
After use………………………………………………………………………………………….7
Safety instructions for the charger………………………………………………………8
Safety Instructions for Li-Ion Batteries………………………………………………..8
Presentation…………………………………………………………………………………………..9
Application…………………………………………………………………………………………..11
Correct handling…………………………………………………………………………..11
Start/Stop…………………………………………………………………………………….12
Tips for the working process………………………………………………………..13
Disposal……………………………………………………………………………………………….13
Technical Data……………………………………………………………………………………..14
Declaration of Conformity……………………………………………………………………15

3
Introduction and safety
Never allow children or persons unfamiliar with these instructions to use the garden device.
Children should be supervised to ensure that they do not play with the appliance.
Intended use
This device is intended exclusively for sawing materials in the private sector. The appropriate
accessories for the respective material are absolutely necessary.
The device must be used following the descriptions
The device must be used following the descriptions and safety instructions given in this user manual.
Unauthorized use will invalidate the warranty and override any responsibility on the part of the
manufacturer. The user is liable for all damages to third parties and their property. Operate the
device only in the technical condition prescribed and delivered by the manufacturer. Unauthorized
modifications to the device exclude the manufacturer's liability for any resulting damage.
General safety instructions for power tools
WARNING!
Read all safety notices and instructions. Failure to follow the safety instructions and
instructions can cause electric shock, fire, and/or severe injury.
Keep all safety notes and instructions for future reference.
The term power tool used in the safety instructions refers to mains operated power tools (with
power cord) and cordless power tools (without power cord).
Workplace Safety
- Keep your work area clean and well lit. Clutter or unlit work areas can lead to accidents.
- Do not work with the power tool in explosive environments containing flammable liquids,
gases, or dust. Power tools produce sparks that can ignite the dust or fumes.
- Keep children and other persons away while using the power tool. If distracted, you may lose
control of the device.

4
Electrical Safety
- The plug of the power tool must fit into the socket. The cap must not be changed in any way. Do
not use adapter plugs together with grounded power tools. Unchanged plugs and suitable sockets
reduce the risk of electric shock.
- Avoid physical contact with grounded surfaces such as pipes, heaters, stoves, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
- - Halten Sie Elektrowerkzeuge von Regen oder Feuchtigkeit fern. The penetration of water
into a power tool increases the risk of electric shock.
- - Verwenden Sie das Kabel nicht zum Tragen oder Aufhängen des Elektrowerkzeugs oder zum
Ziehen des Steckers aus der Steckdose. Keep the cable away from heat, oil, sharp edges or
moving parts. Damaged or tangled cables increase the risk of electric shock.
- If you use a power tool outdoors, only use extension cables that are suitable for outdoor use. The
use of an extension cable suitable for outdoor use reduces the risk of electric shock.
- If you use a power tool outdoors, only use extension cables that are suitable for outdoor use. The
use of an extension cable suitable for outdoor use reduces the risk of electric shock.
Safety of Persons
- Be alert, pay attention to what you are doing, and use common sense when working with a power
tool. Do not use a power tool if you are tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while utilizing the power tool can cause serious injury.
- Wear personal protective equipment and always protective goggles. Wearing personal protective
equipment, such as a dust mask, non-slip safety shoes, safety helmet, or hearing protection,
depending on the type and use of the power tool reduces the risk of injury.
- Avoid unintentional commissioning. Make sure that the power tool is switched off before
connecting it to the power supply and/or battery, picking it up or carrying it. If you have your
finger on the switch when carrying the power tool or if you connect the device to the power
supply while it is switched on, this can lead to accidents.
- Remove adjustment tools or wrenches before turning on the power tool. A tool or key that is in a
rotating part of the device can cause injury.

5
- Avoid abnormal posture. Make sure you have a secure
Stand and keep your balance at all times. This allows you to better control the power tool in
unexpected situations.
- Wear suitable clothing. Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves
away from moving parts. Loose clothing, jewelry, or long hair can be caught by moving parts.
Use and treatment of the power tool
- Do not overload the device. Use the appropriate power tool for your work. With the right
power tool, you will work better and safer in the specified power range.
- Do not use a power tool whose switch is defective. A power tool that can no longer be switched
on or off is dangerous and must be repaired.
- Unplug the power cord and/or remove the battery before making any adjustments to
the device, changing accessories, or putting the device away. This precaution prevents
unintentional starting of the power tool.
- Keep unused power tools out of the reach of children. Do not allow persons to use the device
which is not familiar with it or have not read
these instructions. Power tools are dangerous if they are used by inexperienced persons.
- Maintain power tools with care. Check that moving parts function correctly and do not jam, that
parts are not broken or damaged in such a way that the function of the power tool is impaired. Have
damaged parts repaired before using the device. Many accidents are caused by poorly maintained
power tools.
- Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp
cutting edges jam less and are easier
to guide.
- Use power tools, accessories, insertion tools, etc. according to these instructions. Take into
account the working conditions and the job to be performed. The use of power tools for
applications other than those intended can lead to dangerous situations.