Fuzion FZ04 User manual

4CH User Guide
Contents
Contents
Contents
Before you install ---------------------------------------------------- 4
Notice for Installation -------------------------------------------------- 5
Warnings and Cautions -------------------------------------------------- 6
SPECIFICATION ------------------------------------------------------ 11
Package Contents ----------------------------------------------------- 12
System Configuration -------------------------------------------------- 13
Remote Controller ----------------------------------------------------- 14
HDD --------------------------------------------------------------- 15
USB MEMORY ---------------------------------------------------------16
1. System Setup ------------------------------------------------------ 17
1-1. Setup -------------------------------------------------------- 17
1-2. Display Setup ------------------------------------------------- 19
1-3. Recording Setup ------------------------------------------------ 20
1-3-1. Motion Detection Setup------------------------------------- 21
1-3-2. Schedule Setup------------------------------------------- 21
1-4. System ------------------------------------------------------- 22
1-5. Network ------------------------------------------------------ 24
1-5-1. Port ----------------------------------------------------25
1-5-2. Classification ---------------------------------------------25
1-6. Recording Equipment----------------------------------------------28
2. Main Functions------------------------------------------------------ 31
2-1. Live Window --------------------------------------------------- 31
2-2. Search window ------------------------------------------------- 33
2-2-1. EVENT Search ------------------------------------------- 33
2-2-2. TIME LINE Search ---------------------------------------- 35
2-2-3. GO TO ------------------------------------------------ 36
2-2-4. GO FIRST ----------------------------------------------- 37
2-2-5. GO LAST ------------------------------------------------ 37
2-2-6. LOG List ------------------------------------------------ 37
2-2-7. ARCHIVE Search ----------------------------------------- 37
2-3. PTZF operation ------------------------------------------------- 39

4CH User Guide
2-4. Playback mode ……………………………………………………………………………… 40
3. Archiving Video Into USB Memory Stick ……………………………………………………… 41
3-1. Capturing images or video ………………………………………………………………… 41
3-2. Transferring still images or videos into USB memory stick ………………………… 41
3-3. Playing AVI Video from USB memory stick or PC through Network S/W ………… 42
4. NETWORK ………………………………………………………… ………………………………… 43
4-1. Overview …………………………………………………………………………………… 43
4-2. Minimum PC requirements ………………………………………………………………… 44
4-3. Installing the program ……………………………………………………………………… 44
4-4. Live viewer …………………………………………………………………………………… 45
4-2-1. Main user interface …………………………………………………………… …45
4-2-2. Main control panel ……………………………………………………………… 45
4-5. Search and Playback Viewer ……………………………………………………………… 48
4-5-1. Main user interface ……………………………………………………………… 48
4-5-2. Main control panel ……………………………………………………………… 48
4-5-3. Back up …………………………………………………………………………… 50
4-6. System configuration ……………………………………………………………………… 51
4-6-1. General …………………………………………………………………………… 51
4-6-2. Site ………………………………………………………………………………… 52
4-6-3. Event ……………………………………………………………………………… 52
4-6-4. Record ……………………………………………………………………………… 53
4-6-5. Disk ………………………………………………………………………………… 54
4-6-6. Video ……………………………………………………………………………… 55
4-6-7. About ……………………………………………………………………………… 55

4CH User Guide
Before you install
Before you install
Before you install
This is for UX System users.
It is mainly composed of UX System Design, Name, Connection with Related
equipment such as Pan/Tilt Control, System Program configuration.
☞ This manual is protected by copyright.
☞ Unauthorized Manual Copies are prohibited.
☞ Note: We do does not take any responsibility for damages resulting from failure to
follow manual instructions.
☞ Please ask for help from us or your dealer to disassemble the system for repairs or
questions concerning your system.
4
FCC Verification
Caution : Any changes or modifications in construction of this device which are not
expressly
approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
CE DoC (Declaration Of Conformity)
Warning : This is a class A product.
In a domestic environment this product may cause radio
Interference in which case the user may be required to take adequate measures.

4CH User Guide
Notice for installation
Notice for installation
Notice for installation
All of below notices should be verified before installation and operation.
☞ Do not install DVR in moist, dusty or dirty locations.
☞ Do not expose the system to intense heat or direct sunlight
☞ This system should not be located close to magnetic materials or vibrating
equipment.
☞ Do not install the system in environments with extreme temperatures. (Operating
Temperature 5 °C ~ 40 °C)
☞ Place the system away from debris that may fall into the ventilation slots of the
system.
☞ Ensure the power switch is in the OFF position prior to installation.
☞ Place the system in a location with enough space for cable connections.
☞ Install and operate the system in a well-ventilated place without vibration.
☞ System may be susceptible to interference if placed to close radio or television units.
☞ Do not disassemble system.
☞ Power Overload : Please be sure to connect the system to a power supply within the
indicated range.
☞ If a system is connected to the power directly, please ensure i t is grounded properly
5

4CH User Guide
Warning/Caution
Warning/Caution
Warning/Caution
6
Warnings Cautions
Turn off the system before installing the system.
Do not plug in several electric devices to the
same outlet.
• This may cause heating, a fire, or an electric
shock.
Do not put a liquid container such as water,
coffee, or beverage.
• If liquid is poured into the system, it can
cause a system breakdown or a fire.
Do not bend the power cable and do not put a
heavy object on the power cable causing a
damage.
• This may cause a fire.
Keep the place where the system is installed
always clean after installation. Use dry clothes to
clean the system, but do not use water, thinner,
or other organic solvents.
• This may damage the surface of the system
as well as causing a system breakdown or
an electric shock.
Do not install the system in a humid, dusty, or
soot-covered place.
• This can cause a fire or an electric shock
Do not forcefully pull the power cable or touch
the plug with wet hands. Do not plug in if the
holes on the outlet is too loose.
• This may cause a fire or an electric shock.
Warning
The following describes safety warnings and cautions to protect users and prevent
property loss. Please thoroughly read the bellow before operating the system.
Warnings and Cautions
If the user is not aware of this
caution, the user can be injured or
a property loss may be caused.
If the user is not aware of this
warning, the user can be killed
seriously injured.

4CH User Guide
7
Do not disassemble, repair, or remodel the
system by yourself because a high voltage is
running in the system.
• This may cause a fire, an electric shock, and
injuries.
Install the system in a cool place without direct
sunlight, and keep the temperature properly.
Avoid candle light and heat-generating devices
like a heater. Keep devices and tools away from
a place where a lot of people pass.
• This may cause a fire.
Check if any danger such as a humid floor, an
ungrounded power extension cable, a torn power
cable, or lack of safety grounding. If anything
dangerous is found, ask an assistance to your
dealer or an engineer.
• This may cause a fire or an electric shock.
Install the system in a flat place that is not sealed.
Do not stand the system vertically or lean the
system.
• When the system falls down, this may result
in injuries.
Keep at least 15cm of the distance between the
rear part of the system and the wall. Since the
power cable connection port, image signal
input/output ports, the serial port, the LAN cable
port and external input/output ports are installed
on the rear part of the system, allowing only a
short distance between the wall and the rear part
of the system may have cables bent, damaged, or
cut.
• This may cause a fire, an electric shock or an
injury.
The power outlet must be grounded, and the
voltage range must be within 10% of the rated
voltage. Do not use the same outlet with a hair
dryer, an iron, a refrigerator, or a heating
apparatus.
• This may cause a fire, heating, or an electric
shock.
Warning

4CH User Guide
8
When the system battery is dead, replace the
battery with the same type battery or an
equivalent one specified by the manufacturer.
A dead battery should be disposed according to
the manufacturer’s instructions.
• This may cause an explosion.
If the HDD passes its service life, image data
stored in the HDD may not be recoverable. If
broken images are displayed while playing data
stored in the HDD, it means the HDD passed its
service life. When this happens, contact your
dealer or the service center to have it replaced
with a new HDD.
• We are not responsible for deleted data by
user’s carelessness.
Warning

4CH User Guide
9
Do not install the system in a place with strong
magnetism, frequencies, or impact, nor near
electric devices such as radios and TV sets.
• Install the system in a place without
magnetic objects, frequencies, or severe
vibration.
Install the system in a place with an appropriate
moisture level and the temperature.
• Install the system in a place with an
appropriate moisture level and the
temperature.
Prevent substances from entering into the
system.
• This may cause a system breakdown.
Do not put a heavy object on top of the system.
• This may cause a system breakdown.
Install the system in a well-ventilated place.
• Keep at least 15 cm of the distance between
the rear part of the system and the wall, and
5 cm of the distance between the side part of
the system and the wall.
Install the system on a stable flat place.
• The system may not properly operate.
Caution

4CH User Guide
10
Strong impact or vibration may case a system
breakdown.
• Install the system in a place without severe
vibration.
The outlet must be grounded.
Avoid direct sunlight or an heating
apparatus.
If there is strange sound or smell, unplug the
power cord immediately and contact the service
center.
• This may cause a fire or an electric shock.
Ventilate the air in the system operation room,
and firmly fix the system cover.
• A system breakdown might be resulted in by
inappropriate environments.
In order to keep the system performance, have
your system regularly checked by the service
center.
• We are not responsible for the system
breakdown due to user’s carelessness.
It is recommended to use the Automatic Voltage
Regulator (AVR) for stable power supply.
It is recommended to coil the core-ferrite around
the connector of the system to avoid
electromagnetic interference.
• This is not mandatory, but recommended.
Caution

4CH User Guide
안정된 전원 공급을 위해 AVR(자동 전원 공급
기)을 사용하는 것이 좋습니다.
본 기기에 연결하는 커넥터에는 EMI에 영향을
줄 수 있으므로, Core-Ferrite(자기 코어)를
감아서 사용하는 것이 좋습니다.
권장 사항으로, 필수 사항은 아닙니다.
388(W) X 170(D) X 430(H)mmDIMENSION
30% ~ 90%HUMIDITY
5°C ~ 40°CTEMPERATURE
ENVIRONMENT
AL
SPECIFICATION
SIZE
About 25WCONSUMPTION
Input: AC100-240V, 50/60Hz, 1.5AADAPTOR
ELECTRONICAL
SPECIFICATION
Still Image & Video dataUSB STICK
Still Image & Video dataNETWORK
BACKUP
1EA Max. 250GB CAPACITY HDD
Live, Search, P/T/Z/FFUNCTIONS
1 10/100-base T EthernetLAN PORT
DDNSDYNAMIC IP
ADSL, LANINTERFACE
NETWORK
1 RS-485
CAMERA
CONTROL
1 RS-232CCONSOLE
SERIAL PORT
IR Type Remote Control and Front keysCONTROL UNIT
Record, playback and transferTRIPLEXMULTI TASK
By Resolution, fps & QualityMETHOD
Manual, Motion, Sensor, and ScheduleMODE
MAX. 100fps/4CH(360x288/CH)
MAX. 25fps/4CH(720X576/CH)
MAX. 120fps/4CH(360x240/CH)
MAX. 30fps/4CH(720X480/CH)
RECORDING
SPEED
360x288, 720x576360x240, 720x480RESOLUTION
PALNTSCVIDEO FORMAT
MPEG-4COMPRESSION
RECORD
RTOSOS
4 & 1
INPUT & OUTPUT
ALARM
4 Line In (RCA)
1 Line Out (RCA)
INPUT & OUTPUT
AUDIO
1 VGA
1 composite BNC (NTSC/PAL) –1.0Vp-p
OUTPUT
(Selectable)
4 composite BNC (NTSC/PAL) –1.0Vp-p
INPUT
VIDEO
SPECIFICATION
SPECIFICATION
SPECIFICATION
11

4CH User Guide
Package Contents
Package Contents
Package Contents
Mouse
CLIENT SOFTWARE CD MANUAL
Power Cable DC 12V ADAPTOR
Please check the below listed contents prior to installation!
If there is missing content, Please contact your original seller!
Video Cable
12

4CH User Guide
Configuration
Configuration
Configuration
USB
Connector
Camera CH
And CH
Division
System
LED Playback
Buttons Remote
Controller
Direction
and
Selection
button
Monitor
Power
MENU/SEARCH/PTZ/AUDIO/ESC
Button
13

4CH User Guide
Remote Controller
Remote Controller
Remote Controller
Select and Record Setup7. SELECT
Go to Main Setup Menu8. SETUP
“LEFT”Button for Menu or
Number 4 for Camera and
Password.
◀
Play Fast Forward14.
Play Fast Backward 13.
Play Forward per 60 Sec12.
Play and Pause11.
Play Backward per 60 Sec10.
Go back to Last Setup Menu
or Cancel Setup
9. ESC
“DOWN”Button for Menu or
Number 3 for Camera and
Password.
▼
“Right”Button for Menu or
Number 2 for Camera and
Password.
▶
“UP”Button for Menu or
Number 1 for Camera and
Password.
6. ▲
Channel Sequence5. SEQUENCE
Search Menu 4. SEARCH
Camera Ch and Number Input3. Number
PTZ Mode Convert2. PTZ
Record On/Off1. RECORD
FunctionsButtons
①②
④⑤
⑦
⑧⑨
⑫
⑭
③
⑥
⑩
⑪
⑬
14

4CH User Guide
HDD
HDD
HDD
E-IDE2M7200RPM250GB
E-IDE2M7200RPM160GB
E-IDE2M7200RPM80GB
E-IDE2M7200RPM40GB
Seagate
E-DIE8M7200RPM250GB
E-IDE8M7200RPM160GB
E-IDE2M7200RPM80GB
Western Digital
E-IDE2M7200RPM160GB
E-IDE2M7200RPM80GB
Samsung
E-IDE8M7200RPM250GB
E-IDE8M7200RPM160GB
E-IDE2M7200RPM80GB
Maxtor
E-IDE8M7200RPM250GB
E-IDE8M7200RPM160GB
E-IDE2M7200RPM80GB
Hitachi
INTEERFACEBUFFERRPMCAPACITYBRAND
15

4CH User Guide
USB MEMORY
USB MEMORY
USB MEMORY
Sony
Imation
IOCELL
SANDISK
Absolline
PRETEC
Up to 4GB1.0/2.0
Micro Vault
Series
Up to 4GB1.0/2.0S100 SeriesHP S100
Up to 4GB1.0/2.0Iflash-ex Series
Up to 4GB1.0/2.0SUB Series
Samsung
Electronics
Uninstall shielding SoftwareUp to 4GB1.0/2.0
CELLDISK2.0
Series
Up to 4GB1.0/2.0
Cruzer Micro
Series
Up to 4GB1.0/2.0Xtick SeriesLG
Up to 4GB1.0/2.0Zibn2.0 Series
Up to 4GB1.0/2.0Tiny Series
Up to 4GB1.0/2.0JF SeriesTRANSCEND
NoteCapacitySpeedModel NameMaker
•DVR may be not compatible with a unlisted USB Memory Stick.
•The listed USB Memory Stick recommended
16

4CH User Guide
System Configuration
System Configuration
System Configuration
1-1. Setup
Press “1111”(Default Password) with pushing “CH1”Button four times to enter into Main
Menu.
[Picture 1-1] Configuration Menu
☞ [Reference]
This Manual is written mainly for the Remote Controller.
17
1. DVR Setup
Change the default setup for your application.

4CH User Guide
18
SETUP LIVE OSD
SEQUENCE
SEQ-DWEL TIME
EVENT BEEP
OSD CONTRAST
CHANNEL DISPLAY
SEQ LIST
BRIGHTNESS
CONTRAST
HUE
SATURATION
VGA SCREEN MODE
RECORD RESOLUTION
CHANNEL FRAME RATE
QUALITY
RECORDING
MOTION ZONE
MOTION SENSIVITY
SENSOR TYPE
PRE RECORD
POST EVENT RECORD
ALARM
ALARM DURATION
AUDIO
SCHEDULE
SYSTEM DVR ID
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
NETWORK PASSWORD
DATE FORMAT
SET DATE & TIME
PTZ CONTROL
LANGUAGE
ID REMOTE CONTROLLER ID
DLS
NETWORK PORT
CLIENT ACCESS
BANDWIDTH SAVING
NETWORK TYPE
DDNS
SEND MAIL
STORAGE OVERWRITE
FORMAT
USB UPGRADE
SAVE SETUP TO A USB
LOAD SETUP FROM AUSB

4CH User Guide
1-2. Display Configuration
Go to Live Menu and Select “ENTER” for Display Configuration
Change VGA Screen Mode (Full or Each Channel)VGA SCREEN MODE
Change the saturation value for the specified channel SATURATION
Change the hue value for the specified channel HUE
Change the contrast value for the specified channel CONTRAST
Change the brightness value for the specified channel BRIGHTNESS
Enable/disable the specified channel to be included in sequentia l display mode. SEQ LIST
Enable/disable display of the video channel in live display modeDISPLAY
Select the channel for applying the following settings. CHANNEL
Set the visibility level of the On Screen Display (OSD) OSD CONTRAST
Enable/Disable internal beep alert sound.EVENT BEEP
Dwell time for each cannel display in sequential display mode SEQ-DWELL TIME
Enable/disable sequential display of video channels in full screen modeSEQUENCE
Enable/disable on-screen-displayOSD
DescriptionItem
[Picture 1-2] Live Menu Configuration
[Picture1-2] Live Picture Configuration
19

4CH User Guide
1-3. Recording Configuration
This is for Motion, Alarm, Sensor Recording Setup.
Set recording schedule. If this menu item is selected, screen will change as shown
in figure 1.3.2
SCHEDULE
Enable/disable audio for the specified channel AUDIO
Set alarm time duration for the specified channel.ALARM DURATION
Enable/disable alarm generation for the specified channel. ALARM
Set post event recording time duration for the specified channel
POST EVENT
RECORD
Enable/disable pre-event recording. Pre-event recording time is 5 sec and only
intra-frames are recorded for pre-event recording.
PRE RECORD
Set the type of sensor for the specified channel from none,
N/O (normal open), and N/C (normal closed).
SENSOR TYPE
Set the motion sensitivity for the specified channel. Control th e motion sensitivity
from 1 to 9.
MOTION
SENSITIVITY
Select Full Zone or Partial Zone for motion sensing. If the Partial Zone is selected,
screen will be change as shown in figure 1.3.1
MOTION ZONE
Assign the recording mode for each channel. Recording modes: Continuous,
Motion, Sensor, and Disable.
RECORDING
Select the recording quality for the specified channel from normal, high, and
superior.
QUALITY
Set the frame rate for the specified channel. The sum of the fra me rate values from
each channel cannot exceed maximum frame rates for a particular recording
resolution. Typical values of the maximum frame rate for NTSC video are
120/100fps for QUAD (360*240(NTSC)/360*288(PAL)) and 30/25 fps for FULL
(720*480(NTSC)/720*576(PAL)).
FRAME RATE
Select the channel for applying the following settings. CHANNEL
Set resolution to either full or quad. RESOLUTION
DescriptionManu item
[Table 1-3] Recording Menu Configuration
20