FWG Skye Ottoman Box User manual

PRE-ASSEMBLY PREPARATION
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact customer services on 01244 689949 or
email [email protected].
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 15 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
1/5

Fittings and parts checklist
Parts
A. Ottoman: x1
B. Wooden Legs: x4
2/5

Step by step assembly instructions
Step One
B.
Wooden Legs x 4
Open the Ottoman (A) and take out the 4 Wooden Legs (B) from inside as shown in the diagram below.
Step Two
Wooden Leg (B)
Pre-inserted Nut
Ottoman (A)
Insert the Wooden Legs (B) into the pre-drilled holes on the underside of the Ottoman (A) and twist to
secure in place.
BB
B
B
x 4
3/5

Step Three
The Ottoman box is now ready to use.
4/5

Care and Maintenance
Safety Instructions
This Ottoman should be cleaned using a soft, damp cloth and dried immediately.
Do not use a very wet cloth or allow any liquid contact for a long period of time as this can permanently
damage the surface.
Do not use detergents and do not rub as this can cause permanent damage.
Always protect your ottoman from direct sunlight as this may accelerate the natural on-going discolouration
process.
The legs of the ottoman should be tightened regularly.
Please retain this information leaflet for future reference.
Never drag furniture when moving it. Always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Any assembly should be carried out by a competent adult.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
During assembly, children should be kept away from the product due to possible risk of injury.
Do not use this item if any components are missing or damaged.
It is recommended that care is taken when moving heavy objects to a new location to avoid
personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.
This product complies with BS EN 14749:2016 and BS 4875-7:2006.
If you require any additional information or have any issues with this product please call the customer
services helpline on 01244 689949 or email [email protected].
5/5