G6 Breathe BP-PRO-600 User manual

Air Purifier
Model BP-PRO-600
breatheplus.tech
[e-mail]
Medical Grade Professional
Air Purification for Your
Home and Workspace

Dear Customer,
Thank you for purchasing the Breathe+ Pro Air Purifier.
To facilitate the installation and use of this product, we recommend that you carefully
read this manual and keep it stored in a safe place. To ensure that you always enjoy
fresh air, use this manual for qualified and standardized installation, proper use and
maintenance.
If any questions arise from the product’s use, please consult this manual. We also
welcome any comments or suggestions that you may have about our products and
services. Refer to the contact information at the end of the manual.
Yours truly,
BreathePlus Team
Contents
Performance Index ..............................................................................01
Product Features ................................................................................02
Product Design ...................................................................................03
Installing the Filter ...............................................................................04
Function Description ..........................................................................05
How to use ...........................................................................................08
During Installation ...............................................................................09
Warnings .................................................................................................10
Cleaning and Maintenance ................................................................13
Packing list .............................................................................................15
Troubleshooting ...................................................................................16
Performance Index
Product Name Breathe+ Pro
Product Model BP-PRO-600
Voltage/Frequency AC 110 V, 50/60 Hz
Rated Power 90 W
Noise ≤69 dB(A)
Amount of Particulate-
Cleaned Air (CADR) 350 cfm
Amount of Formaldehyde-
Cleaned Air (CADR) 350 cfm
Applicable Area 450~775 sq. ft.
Suggested Period to
Replace Filters HEPA Filters - 3 months
Net Weight 24 lbs
Product Measurements 19" x 10.6" x 28"
Method of Cleaning
Pre-Filter
Activated Carbon
High Eciency HEPA Filter
1. This product can be used by children aged 8 years and above, and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, if they have been provided with supervision or instruction concerning
the safe use of this product and understand the hazards involved.
2. Product cleaning or maintenance shall not be conducted by children without
supervision.
3. If the supply cord is damaged, then it must be replaced by the manufacturer, its
designated service agent or similarly qualified persons.
4. To reduce the risk of electric shock, this equipment has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact qualified
personnel to install the proper outlet. Do not alter the plug in any way.
⁰¹

Pre-Filter
The product’s primary filtration system uses a mesh filter located in
the pre-filter. It is mainly used for filtering dust larger than 5 microns,
including large dust particles, dander, pollen, floating debris and
other pollutants. It can be washed and used repeatedly.
High-Eciency HEPA Filter
The high-eciency HEPA filter captures airborne germs, smoke and
dust particles 0.3 microns in size, at a rate of 99% or more. In
combination with the multifunctional filter, the HEPA filter can capture
microscopic particles larger than 20 nanometers in diameter,
including bacterial mold, dust, allergens and some viruses, while also
filtering out smoke.
Activated Carbon Filter
Activated carbon traps odor-causing volatile organic compounds like
formaldehyde from the air. Activated carbon is a porous material,
which means that molecules like formaldehyde and other Volatile
Organic Compounds get adsorbed to it, eliminating them from the air.
These compounds mostly come from paints, newly installed furniture
and carpets, as well as cooking.
⁰² ⁰³
Product Features Product Design
Front cover Side cover Back cover
F
TIMER-TIMER-
TIMER+TIMER+
-
+

Installing the Filter Function Description
1. Remove the filter from the
plastic bag.
A. Remove the front cover.
B. Remove the pre-filter and take
our the filter.
C. Take the filter out of the plastic
packaging.
2. Install the filter and front
cover.
A. As there are dierences between the
inside and outside of the dust filter , the
side with the handle must always face
outwards.
B. As there are dierences between the
inside and outside of the front filter (pre-
filter), the side with the handle must
always face outwards.
C. Re-install the front cover.
Power
AUTO
Timer
Turbo
Reset
1. Power On
When the product is first plugged in, pressing the "POWER" button once
will turn it on. After the “POWER” button is pressed for the second time,
the product will switch to standby mode. (Attention: the power icon is
red when in “standby” mode and is orange when in “on” mode.)
2. Mode Selection
The "AUTO" button will switch the air purifier into the Automatic Mode.
In the automatic mode, the fan speed will change according to the air
quality sensor's data. (The icon will be on when the product is in auto
mode, otherwise it will be o.) Attention: if the user changes the fan
speed under the auto mode, the unit will automatically exit auto mode.
The "TIMER+" button will increase the timer by 1 hour. The "TIMER-"
button will reduce the timer by 1 hour. When the timer runs out, the
machine will go in standby mode. (The icon will be on when the unit is
operating in timer mode, otherwise it will be o.)
The “TURBO” button sets the highest fan speed. To turn turbo mode o,
simply press the button once more. (The icon will be on when the unit
operates in turbo mode; otherwise it will be o.)
This product has a filter change reminder function. After approximately
1,500 hours of use, the indicator light on the panel will light up to
remind the user to replace the filter. To reset the timer, simply hold the
button until it resets.
⁰⁴ ⁰⁵


Sleep
Child-lock
fan speed
Power
Screen
Fan speed
When “SLEEP” mode is enabled, the control panel and LED lights turn
o. If the timer function is on, then the purifier will turn oat the
predetermined time. Note: when in “Auto” mode, if the environment is
dark and is less than 5- 10 lumens, the unit will automatically enter
“SLEEP” mode. If the environment is brighter than 10 lumens, then the
unit will exit “SLEEP” mode.
The "Child-Lock" button locks all buttons. While enabled, no buttons will
respond to being pressed. To disable, hold the “Child-Lock” button for 5
seconds. (While in child-lock mode the "Child-Lock" icon will be on;
otherwise it will be o.)
When the product is on, press "+" or "-" icons to change the fan speed.
After the speed is changed, the motor will only operate at the selected
speed without being aected by the sensor.
3. Display function description
The PM2.5 sensor measures concentration of particles larger than 2.5
microns in the air. When turned on, allow 1 minute for the sensor to
calibrate. When the timer is on, the “µg/m3” icon in the lower right
corner is not displayed.
When the measured usage totals 1500 hours, the filter needs to be
replaced and the icon will turn on to remind the user. The display
indicator light will flicker for three minutes and then the icon will remain
on continuously until the filter is changed. The icon light will not
illuminate before the total usage reaches 1500 hours.
The Fan Speed icon’s lines correspond to the fan’s speed intensity,
from the bottom to the top. Each line represents a fan speed. The
highest speed is five.
Air Quality Operating Light Indicator and Fan Speeds:
Green: Excelent AQI:
TVOC = 0 - 1.00; PM2.5 = 1 - 70 (Fan Speed 1)
Blue: Good AQI:
TVOC = 1.01 - 2.00; PM2.5 = 71 - 180 (Fan Speed 2)
Yellow: Acceptable AQI:
TVOC = 2.01 - 3.00; PM2.5 = 181 - 300 (Fan Speed 3)
Red: Poor AQI:
TVOC =< 3.01-5.00; PM2.5 =< 301 - 999 (Fan Speed 4)
Turbo mode (Fan Speed 5)
4. Shutdown
If on, pressing the "POWER" button will put the machine into standby
mode.
⁰⁶ ⁰⁷
+
-

How to Use:
1. Auto mode: When the machine is plugged in, press the "POWER" button and then
the "AUTO" button in that sequence. Then the unit will operate under the sensor’s
control. The fan’s operating speed will adjust automatically based on the data
collected by the sensor. This mode is suitable for most situations.
2. Manual mode: When the product is plugged in, press the "POWER" button. Then
press the “FAN SPEED" button to manually select the speed. This mode is suitable for
situations where manual purification is needed. Note: in manual mode the product
will not automatically adjust the fan speed.
3. Night mode: In this mode, when the "SLEEP" button is pressed the product
operates at the quietest fan speed level to limit the amount of noise. (In Auto mode,
the unit will switch to Night mode when the environment becomes darktv)
4. Timer mode: In the three modes mentioned above, after the "TIMER" button is
pressed and the amount of time is set, the unit will begin the countdown sequence.
Once the amount of time set expires, the unit will turn o.
5. Child-Lock mode: All buttons on display panel and remote control will be locked
while in this mode. To exit this mode, press the “CHILD-LOCK” button for 5 seconds
or press the “UNLOCK” button on the remote control.
The sun
8 in
12 in
Items
o u t l et
Air inlet
During Installation
1. Do not place the product in direct sunlight, facing air vents or
sources of heat. This may cause the unit to warp, deteriorate,
discolor or malfunction.
2. For the best performance, the product must be placed on
the floor. The unit has an automatic tilt sensor, that shutsdown
the device when tipped over. Thus, we recommend placing the
product on a flat surface.
3. For eective room circulation, place the product
approximately 12 inches or more away from walls or other
objects. Please keep the back side of the unit at least 8 inches
away from the wall for it to work more eectively.
4. Do not place anything on the product or it may lead to a
malfunction. Be especially careful not to place magnets or any
other metal items on the unit.
5. Do not block the exhaust vent or supply vent. Do not place
any objects on top of the exhaust vent or in front of the supply
vent.
⁰⁸ ⁰⁹

Warnings
110V
50Hz
1. Do not pick up or move the product while it is running. When
moving or storing the unit, do not pull the power cord. This
may cause a short circuit or do internal damage to the power
cord, which may lead to a fire or cause an electric shock.
2. Do not damage the power cord or the prongs. Do not cut,
excessively twist, pull or bend the power cord. If the power
cord is damaged, please call the manufacturer, its authorized
service agent or a trained and certified third-party service
professional to replace it.
3. Do not use power supplies, universal sockets, splitters or
other connective devices that exceed or otherwise violate the
product’s recommended power rating. Use only 110V~ 5A AC
power. Using a universal socket or connected power source
that exceeds this rating could lead to overheating and may
cause a fire.
4. Do not touch the plug with wet hands. This may result in an
electrical shock.
5. Do not place your fingers or metal objects into the air vents.
This may cause an electrical shock or a physical injury.
6. To avoid an electrical shock or fire, do not allow water,
flammable cleaners or other liquids enter the unit.
7. This product cannot be used to replace ventilation
equipment, vacuum cleaners or kitchen fans.
8. Make sure the remote control is placed in a location where
children cannot reach it, to avoid unintended damage.
9. Do not place in the following locations:
- Unstable places: this may cause the product to topple or fall
over, which may lead to injury, electrical leakage or fire.
- Hot or humid places, such as near the shower: this may
result in an electrical shock or fire.
10. Do not use the product in a room that is using an
chemical-based insect killer.
- Chemical residue may accumulate in the product and then
be released, which could
cause harm to the user’s physical health.
- After using any incense-based insect killers or mosquito
coils, the user must allow the room to be fully ventilated
before using this product.
11. To reduce the risk of electric shock, this equipment has a
polarized plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit,
contact qualified personnel to install the proper outlet. Do not
alter the plug in any way.
¹⁰ ¹¹

Safety Precautions
110V~
5A
1. Should any of the following conditions occur (which may also occur along with
electrical shock, sparks or smoke), turn othe product immediately:
- Strange noises or vibrations occur during operation; or - Product is unusually hot or
has a burnt odor.
2. Please clean the product’s power cord and plug prongs regularly. The presence of
dust or moisture could damage the unit, which may result in a fire. Accordingly:
- Unplug the power cord and wipe it with a dry cloth; and
- Unplug the power cord if the product is not being used for a long period of time.
3. Before conducting any electrical maintenance make sure to unplug the device.
- The product may inadvertently or suddenly turn on during electrical maintenance,
which could lead to electrical shock or injury.
4. Plug the power cord securely into a power outlet. If the power cord is not securely
plugged in, then this may cause overheating and lead to an electrical shock or fire.
- Do not use a damaged, loose or otherwise unsuitable power outlet.
5. Unplug the power cord by pulling the plug insulator.
- Pulling the power cord to unplug the product may cause
damage to the power cord or cause an electrical shock,
short circuit or fire.
6. Should any of the following circumstances arise, please unplug the product
immediately and contact the manufacturer’s service department, its authorized
service
agent or a trained and certified third-party service professional: - a switch does not
work;
- the power cord or plug is unusually hot;
- any abnormal sound or vibration is observed; or
- any other abnormalities or malfunctions are detected.
7. To prevent the hazard of an electrical shock, do not disassemble the product.
Cleaning and Maintenance
Cotton swabs
1. Pre-Filter (approximately twice per month):
- Clean the surface of the pre-filter with a vacuum cleaner or
wash with water. Allow to dry thoroughly.
- Clean dust from the front of the HEPA filter with a vacuum
cleaner.
- The HEPA filter is delicate so do not press hard on the filter
while vacuuming.
- Do not use water to clean the HEPA filter.
2. High-eciency H13 HEPA filter (if operating in high dust environment):
3. Particulate sensor (approximately once every two months):
- Wipe the lens with a dry cotton swab periodically to remove any dirt. (Moisture or
tobacco smoke residue may cause it to not work properly). Specifically, remove the
particulate sensor cover and use a dry cotton swab to wipe the lens.
- Do not insert any cotton swabs into any product area, other than as instructed
above. - Be sure to unplug the power cord.
- If the user is unable to see clearly, use a secondary light source.
¹² ¹³

Friendly Reminders
- Before cleaning and maintenance, unplug the power cord.
- Do not operate the product without a filter. Any dust taken into the product without
a filter in place may cause malfunction.
- Unplug the product when not using it for a long period of time. The user should also
be aware that power is consumed while the product is in standby mode.
- The filter may need to replaced sooner than scheduled depending on where and
how the product is usedv. Replace the filter if its eectiveness is no longer
noticeable.
Packaged List
Air Purifier Unit 1PCS
Remote Control 1PCS
H13 HEPA filter 1PCS
Pre-filter 1PCS
¹⁴ ¹⁵
Instructional Manual 1PCS

Troubleshooting
Malfunction Inspect / How to fix
Cannot turn on power or
pressing any button yields
no response.
1. Is the power cord plugged in? Plug in the
power cord.
2. Front cover? Close the front cover.
3. Is the product placed vertically on the
ground? Place the product on a flat surface.
4. Is the product in child-lock mode? When
“Child-Lock” appears on the display, hold the
lock/reset button for 5 seconds to turn oand
exit the child-lock mode.
1. The air is dirty, but the air
pollution indicator is green.
2. The air pollution indicator
remains red even when
continuously running.
1. Is the purifier in a place that cannot easily
absorb the dirty air (i.e. dust)? Try moving it
somewhere else.
2. Is the particulate sensor dirty? Clean the
particulate sensor as per the instructions
contained herein.
The smell of the exhaust
vent is unpleasant.
1. Is the filter dirty? Clean the filter.
2. Has the filter been replaced recently?
Replace the filter.
The product doesn’t
automatically enter sleep
mode at night.
Is the product in manual mode? Press the
"AUTO" button on the panel to ensure that the
unit is operating in auto mode.
The product has been
running for a long time but
there is no significant
improvement in air quality.
1. Was the plastic bag on the filter removed?
Remove the plastic bag from the filter before
use.
2. Are the filters installed correctly, each in
the right direction? Check the filters for
correct installation.
The filter alarm lamp is on. It indicates that it is time to changes the filter
based on the preset value of reaching 1,500
hours of usage.
When you replace the filter, press the
“RESET” button for a long time to reset the
product.
¹⁶ ¹⁷