Gaia Baby Complete Sleep+ User manual


Gaia B a by Complete Sleep +/M ini 6AIA
1
Mi n i Cot
Assembly Instructions
2
Maxi Cot
3
Toddler bed
baby
4
First bed

Hardware list
Ax 14
Barrel Nut

Dx8
Bolt
Fx6
Metal Dowel

Bx 14
Barrel Bolt

Cx60
Bolt
&
Ex1
Allen Key

 I�

Gx4
Foot
Hx6
Plastic Screw
ATTENTION NOTICE :
Please save all un-used parts for future re-assemble.
1

 

s 




x 

1 B
ATTENTION NOTICE:  






2


�


  Mini Cot Assembly
Using bolt CX 3 pcs, assemble GX 1 pc with 3 by Allen Key E.
*Repeat step 1 above u ntil all 4 feet are assembled.

 
 
 


3
E
G
You need hardware
8pcs
B 
C @1111111111mm
8 pcs
E 
Step 2 Mini Cot Assembly (Newborn Position)
Using bolt C X 4pcs, assemble Part 3 to 1 A by Allen Key E;

*Step 2B: 
cccccccc
cccccccc
E
B
B

Step 3 Mini Co t Ass e mbly

You need hardware
B I � I 6pcs
Step 4 Mini Co t Ass e mbly (Newborn Position)
  
You need hardware
A g 6pcs
4
4
1 
4
lA

Step 5 - M i
n i Cot Assembly (N e w bor n P ositio n)
Using bolt C X4pcs, assemble by Allen Key E.
You need hardware
C  4pcs
E �
Step 6 - M i n i Cot Assembly (N e w bor n P ositio n)
Using Barrel nut A X8pcs , assemble Side panel by Phillips Screwdriver.
Using bolt C X4pcs and bolt D X 8pcs , assemble Side panel by Allen Key E.
You need hardware
A g 8pcs
C  4pcs
  
E
5


  

Note : LOW E R POS I T I ON
If your baby is able to kneel/
stand please use the lower
position.
M
o v e P arts
2 x 2 pcs to L ower
P osition. R emo v e P arts 7 x 4
Step 8 - M ini Cot Assembly (N e w born P osition )
Safety notice: Height selection new born or lower position.
Using Bolt C X8pcs, assemble P arts 8 x2 pcs by Allen Key E.

  

6
Step 7 - M ini Cot Assembly (N e w born P osition )
Height selection - Upper P osition/
N ewborn
Using bolt C X1 2 pcs, assembl e parts 2x2 pcs + 7x4 pcs in upper position.

Step 9 - M ini Cot Assembly (N e w born P osition )
Safety notice : Height selection new born or lower position.
* Using the Mattress put down into the First Cot.
* Use with Gaia Serena Maxi Cot Mattress (sold separately)
*Recommended Mattress Size: MINI COT: 925mm long x 650mm wide x
100mm depth.
7
lower position
lower position

Step 10 - Maxi Cot As sembly
Using bolt C X4pcs, assemble by Allen Key E.
 
  
 �
Step 11 - Maxi Cot Asse mbly
Using Barrel nut A X8pcs , assemble by Phillips Screwdriver.
Using bolt C X4pcs , assemble by Allen Key E.
 
 g 
  
 �
4

Step 12 - Maxi Cot Assembly
Insert Metal Dowel X6pcs into the holes of the side panels by hand & hammer.
You need hardware
F 6pcs
Step 13 - Maxi Cot Assembly/ Newborn
Using bolt C X 4 pcs , assemble 2 pcs P art 12 to 2 pcs P art 11 by Allen Key E.
6
You need hardware
C  4pcs
E �
C
C