
2
Hera peg rail safety information
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE REFERENCE
INSTRUCTIONS FOR SAFE USE
• WARNING
• Ensure that the fiings used to hang the shelf are correct for the type
of wall to which the shelf is to be fixed.
• Ensure that the wall you select is suitable for aaching the shelf
and that the wall and the wall aachment fiings are capable of
withstanding the forces generated.
• The shelf may represent a hazard if it is not correctly installed.
• The installation of the shelf must be carried out by a competent
person. If in any doubt about the installation consult a professional.
• Regularly check all the wall shelf’s screws and fiings to make sure
they are tight and that the wall shelf is not damaged.
• •Donotxyourwallshelfinthecloseproximityofanopenreorother
sources of heat, such as radiators, electric or gas fires.
• Check that the heads on the fiings are the correct size, so that the
head will fit into the wide end of the hanger plates slot but cannot be
pulled through the gap in the hanger plates.
• Check that you are using the correct sized drill bit for the fiings.
• Check that marks made on the wall for the fiings’ holes are level using
a spirit level before drilling into the wall.
• Double-checkallthemeasurementsbeforedrillinganyholes.
• When fied to the wall, the heads on the fiings must protrude the
correct distance so that they can be sloed into the slots in the hanger
rails.
CHINA Hera Peg rail.indd 2 21/01/2022 09:33