Galanz GLB57MS2B15 User manual

nce,
using
rom
ted
ore
e
e
n it is
at
e fo
r
cturin
g
ng.
moke
©2019 Galanz Americas Limited Company
Model# GLB57MS2B15
BEVERAGE CENTER INSTRUCTION MANUAL
Thank you for purchasing a Galanz product please read this manual carefully for correct usage and safety,
and keep for future reference.For service,support and warranty information,call 800-562-0738.
@2019 Galanz Americas Limited Company.

TABLE OF CONTENTS
TABLE OF CONTENTS
1
Disposal of the Beverage center.........................................................................3
Grounding instructions.....................................................................................3
Location requirements......................................................................................4
Beverage center safety..................................................................................... 2
Moving the Beverage center..............................................................................9
Important safety instructions.............................................................................2
Installation instructions.....................................................................................4
Operating instructions......................................................................................6
Parts and features............................................................................................7
Specifications..................................................................................................7
Cleaning..........................................................................................................8
Power Failure...................................................................................................8
Vacation..........................................................................................................8
Reversing the door...........................................................................................9
Troubleshooting tips.......................................................................................10
Warranty........................................................................................................10

BEVERAGE CENTER SAFETY
BEVERAGE CENTER SAFETY
SAVE THESE INSTRUCTIONS
2
Your safety and the safety of others are very important.
We have provided many important safety messages in
this manual and on your appliance. Always read and
obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards
that can kill or hurt you and others.
All safety messages will follow the safety
alert symbol and either the word “DANGER”
or “WARNING.”
These words mean:
All safety messages will tell you what the potential
hazard is, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are
not followed.
You can be killed or
seriously injured if you
don’t immediately follow
instructions.
–
DANGER
You can be killed or
seriously injured if you
don’t follow instructions.
WARNING
BEVERAGE CENTER SAFETY IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of explosion,
fire, electrical shock, and/or injury to persons, including the
following:
Read all instructions before using the appliance.
1. This appliance must be grounded. Connect only to
properly grounded plug See Important Grounding
Instructions on page 3.
2. Install or locate this beverage center only in accordance
with the provided Installation Instructions.
3. To protect against electric shock, do not place cord, plug,
or beverage center in water or other liquid.
5. Please note that servicing shall be done by factory
authorized service personnel, to minimize the risk of
possible ignition due to incorrect parts or improper service.
4. The refrigerant of this product is R600a, which is
flammable. Make sure not to damage the cooling system
during the transportation and installation.

DISPOSAL OF THE BEVERAGE CENTER
SAFETY WARNINGS DISPOSAL OF THE BEVERAGE CENTER
3
All refrigeration products contain refrigerants, which under
federal law must be removed prior to product disposal. If you
are getting rid of an old refrigeration product, check with a
qualified disposal company for instructions.
1. Take off the doors.
2.
easily climb inside.
Leave the shelf racks in place so that children may not
Before you throw away your old beverage center:
DISPOSAL OF THE BEVERAGE CENTER
Suffocation Hazard
Remove door from your old beverage center.
Failure to do so can result in death or brain damage.
WARNING
Refrigerants
Consult a qualified electrician or service technician if the
doubt exists as to whether the appliance is properly
grounded.
grounding instructions are not completely understood or if
This appliance must be grounded due to the event of an
electrical short circuit. This appliance is equipped with a
grounded wire and a grounded plug. The beverage center
plugged into a properly installed grounded 3 prong
outlet.
must be
Failure to follow these instructions can result
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
in death, fire, or electrical shock.
WARNING
GROUNDING INSTRUCTIONS

LOCATION REQUIREMENTS
LOCATION REQUIREMENTS
1. It is recommended not to install the beverage center near an
oven, radiator, or other heat source.
2. Do not install in a location where the temperature will fall below
55 °F (13 °C). For best performance, do not install the beverage
center behind a cabinet door.
4. Leave a minimum of 1/2" (1.27 cm) between each side of
the appliance and the wall. The top and back of the
appliance should have a minimun 1 ½" (3.81 cm) clearance.
This allows for proper air circulation. This appliance is
intended to be free-standing and should not be built-in or
placed in arecessed area.
3. The beverage center should be located on a firm, flat surface
that is strong enough to support the beverage center when it
is fully loaded.
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from beverage center.
Failure to do so can result in death, explosion, or fire.
WARNING
LOCATION REQUIREMENTS
6. Do not put the unit in a place where it is subjected to sunlight.
7. Do not put the unit in a palce where the ambient temperature
is more than 90 °F (32 °C).
5. The beverage center legs must be adjusted during installation
in order to function properly. The leveling legs on the front
corners can be adjusted by turning clockwise to raise the
appliance, and counter-clockwise to lower it. Be sure to
have the appliance sloped slightly backward to ensure that
the door closes tightly.
4
Excessive Weight Hazard
Use two or more people to move and install beverage center.
Failure to do so can result in back or other injury.
WARNING
INSTALLATION INSTRUCTIONS
4

INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
5
Before using the beverage center for the first time, remove all
of the packing materials, including the foam base and adhesive
tape holding accessories in place.
Before loading beverages, recommend to cool the unit to the
setting temperature, and not to load many bottles at the same
time.
BEVERAGE STORAGE
B
1. The maximum capacity of GLB57MS2B15 is 172 cans (335ml)
when laid vertically.
2. To achieve the maximum capacity, place 25 cans in the top
rack ;arrange the 49 cans in the second and the third . As
shown below in Figure A.
3. Next, place 49 cans in the bottom rack as shown below in
Figure B.
4. Store beverages in sealed cans only. Failure to follow these instructions can result
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
in death, fire, or electrical shock.
WARNING
OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
6
4. It is recommended not to open the door frequently to
minimize the power consumption.
Touch this pad once ( ) and the temperature will decrease
1 °F (1 °C).
The new desired temperature will flash on the display for five seconds
Touch this pad once ( ) and the temperature will increase
1 °F (1 °C).
and then back to the actual temperature which will gradually change
Touch this pad (°C/°F) and the temperature display will switch
between °C & °F.
until the set point is reached.
2. Plug beverage center into a grounded 3 prong outlet.
(See “Grounding instructions”).
1. Allow beverage center to stand upright for 4 hours before using.
3. Operate the beverage center by adjusting the temperature
control buttons (up and down arrows) to various settings.
The adjusting temperature range is 37 °F to 61 °F (3 °C to 16 °C).

PARTS AND FEATURES
PARTS AND FEATURES
PARTS AND FEATURES
7
1
Glass Door
2
3
4
Shelf Racks(3)
Electronic Control
Leveling Legs
SPECIFICATIONS
GLB57MS2B15
I
5.7
120
60
1.6
<42
Sound [dB]
Capacity (cu.ft)
Voltage (V)
Frequency (Hz)
Current (A)
Electric shock protection type
Model
R600a/2.04oz
81.32
33~50
23.66
24.76
34.37
Interior temperature (F)
Refrigerant
Net weight (lbs)
Dimension (Inches)
Width
Depth
Height
1
2
3
4

CLEANING
CLEANING
8
• Clean the interior of the appliance with a mixture of warm
water and baking soda, use about 1-2 tablespoons per
quart of water.
• Use a sponge or soft cloth and make sure to wipe excess
moisture out before cleaning around the controls.
• Rinse thoroughly with warm water and dry with a clean soft cloth.
Clean the exterior surface with warm water and mild detergent.
Rinse thoroughly and dry with a clean, soft cloth.
The door gasket must be kept clean to ensure a proper seal.
Make sure to clean the gasket frequently with the method
as described above for exterior cleaning.
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion,
or fire.
WARNING
CLEANING
Interior
Exterior
Door Gasket
When a power failure occurs, the beverage center can
normally keep food cool for several hours. Do not put
additional food into the appliance during a power failure, and
avoid opening the door. Disconnect the plug from the outlet,
and reconnect when the power has been restored.
POWER FAILURE
VACATION
Before leaving on any vacation, remove all open beverage
while you are gone. If you plan to be gone for an extended
period of time, it´s recommended that all of the beverage
should be removed from the appliance and it should be turned
off and unplugged from the outlet. Clean the interior according
to the directions provided in the Cleaning section of this manual,
and leave the door open.

MOVING THE BEVERAGE CENTER
MOVING THE BEVERAGE CENTER
9
MOVING THE BEVERAGE CENTER
Excessive Weight Hazard
Use two or more people to move and install
beverage center.
Failure to do so can result in back or other
injury.
WARNING
1. Turn off the beverage center and unplug from the outlet.
3. Tape the door shut.
4. Do not lift or pull the door or door handle during
transportation.
5. When moving, the appliance can not be tilted over 45
degrees as possible damage to the sealed system could occur.
6. Take care to avoid strong vibration or impact to the appliance.
REVERSING THE DOOR
1
2
Top hinge cover
Top hinge screw
3
4
5
6
Top hinge
Cabinet plug
Door seal
Handle screw
7
8
Door plug
Handle
Door handle plug
Baffle screw
9
10
Baffle
Bottom hinge screw
Bottom hinge
11
12
13
1
2
6
8
5
4
73
9
10
11 12 13
2. Remove all beverages and securely tape down all loose
items first.

MOVING THE BEVERAGE CENTER
MOVING THE BEVERAGE CENTER
10
NOTE: Do not tilt the appliance over 45 degree when reversing
the door as possible damage to the sealed system may
occur.
1. Remove top hinge cover and 3 top hinge screws which are
below it. Then remove top hinge.
2. Remove 1 cabinet plug ,1 door plug and 2 door handle plugs.
3. Remove the door seal and 2 handle screws inside.Then
remove the handle.
4. Remove the door.
5. Remove the 2 baffle screws and then remove the baffle.
6. Remove the bottom hinge and 2 bottom hinge screws.
7. Install the bottom hinge on the other side with 2 bottom hinge
screws. Then install the baffle with 2 baffle screws.
8. Install the handle on the other side with 2 handle screws,and
then Install the door seal.
9. Install the door.
10.Install the top hinge on the other side with 3 top hinge screws.
11.Install top cover above the top hinge and install 1 cabinet
plugs on the other side.
TROUBLESHOOTING TIPS
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
WARNING

TROUBLESHOOTING TIPS
TROUBLESHOOTING TIPS
11
Problem Possible Cause What to do
Beverage center
does not operate
Not plugged in
tightly
Unplug, wait 10
seconds, then plug
in again
Tripped circuit
breaker or blown
fuse
Replace fuse or
reset circuit breaker
Problem with
electrical outlet
Consult with a
qualified electrician
Beverage center
seems too warm/
beverage does not
seem to cool
Temperature setting
may be too warm
Door opened too
frequently
Door not closed
tightly
Warm weather
Lower the
temperature setting
This is normal
Check to make sure
that nothing inside
the beverage center
is causing the door
to not close
This is normal
Problem Possible Cause What to do
Compressor runs
too long, or cycles
on and off
frequently
Hot weather
Door opened too
frequently
the outside of the
Moisture forms on
appliance
This is normal
during periods of
high humidity
Wipe the surface
dry using a soft
cloth
Make sure that
nothing inside the
beverage center is
causing the door to
not close
This is normal
This is normal
Door not closed
tightly
Temperature control
set at coldest
setting
Adjust temperature
to a warmer setting
Large amounts of
beverage placed in
beverage center
This is normal
the inside of the
Moisture forms on
appliance
Vibration noise
The door is slightly
open
Close the door
tightly
This is normal
during periods of
high humidity
This is normal
This is normalDoor is opened too
long or too frequently
Beverage center is
on an uneven surface
Adjust the leveling
legs
Beverage center is
touching the wall
Move the beverage
center away from the wall

TROUBLESHOOTING TIPS
TROUBLESHOOTING TIPS
Ambient temperature is
too high
Move the item away from
the hot environment
The interior temperature is Decrease the temperature
Compressor issues
Ambient temperature is
too low
Move the item away from
the cold environment
The interior temperature is Increase the temperature
Compressor issues
“HH” on the display
“LL” on the display
Problem Possible Case What to do
setting
Consult with a qualified
electrician or customer
service center
setting
Electrical issues“EF” on the display
Electrical issues“EE” on the display
Consult with a qualified
electrician or customer
service center
Consult with a qualified
electrician or customer
service center
Consult with a qualified
electrician or customer
service center
The flow of refrigerant through the coils can cause a noise.
·
The sides of the appliance may become warm as a result of the cooling function.
·
The following are normal conditions that can be encountered during the operation
of this appliance:
more than 53 °F (12 °C)
less than 25 °F (-4 °C)
12

LIMITED WARRANTY
LIMITED WARRANY
13

WARRANTY REGISTRATION
WARRANTY REGISTRATION
14

©2019 Galanz Americas Limited Company
15