Gallagher i Series App Gateway User manual

QUICK START GUIDE
i Series App Gateway
Manage, monitor, and control your energizer
using your phone.
The i Series App Gateway enables communication between your
i Series Energizer and the Gallagher Ag Devices Mobile App.
Alarm
Bluetooth®connection
Energizer voltage
WiFi connection
Energizer standby button
Bluetooth®pairing button

i Series App Gateway
Communication
The App Gateway communicates with your mobile
device using Bluetooth®when you are nearby.
You can connect to your WiFi network to manage, monitor and
control your i Series Energizer from anywhere, anytime.
Add up to six Fence Monitors* to your fence line, to monitor
location specific voltage, receive performance alerts and know
the area where a fault is located.
*sold separately G51000
*If you do not have WiFi connectivity at your energizer location, install a hotspot to provide
connectivity

Installing your
i Series App Gateway
Install the App Gateway in a location that provides
a clear line of site for Bluetooth®communications to
your phone. Gallagher recommends installation on
the outside of the shed.
Power off the energizer
Screw the base plate to the
outside of the shed
Drill a 9mm hole through
the base plate ring and thread
the cable
Slide the App Gateway
down onto the base plate
Plug the App Gateway
cable into the back of the
energizer
Power on the energizer

Connecting your App
to your Energizer
Download the
Gallagher Ag
Devices Mobile
App
Sign up
or login
Select App
Gateway
Tap the down
arrow to view
the earth and
zone voltages
If available,
connect to WiFi
using the More
menu
Tap the
energizer to
register your
connection
1
4
2
5
3
6
am.gallagher.com
03/23 v1