Gallagher i Series User manual

QUICK START GUIDE
i Series App Gateway
The i Series App Gateway enables communication
between your i Series Energizer and the Gallagher Ag
Devices Mobile App.
The App Gateway uses Bluetooth® to communicate with your mobile.
To monitor and control your i Series Energizer from anywhere,
anytime, connect the App Gateway to your WiFi network.
Alarm
Bluetooth®connection
Energizer voltage
WiFi connection
Energizer power button and indicator
Bluetooth®pairing button

Installing your
i Series App Gateway
Install the App Gateway in a noticeable location on
the outside of the shed.
Position the App Gateway where:
It can be clearly seen as you pass by.
It has a clear line of sight for the Bluetooth®connection to
your phone.
If you're intending to connect the App Gateway to WiFi,
ensure the location has adequate WiFi signal strength.

Unplug the energizer from the power source.
Secure the mounting bracket to the outside of
the shed using the supplied screws.
Note: The cable will need to be thread through
the wall. Make sure your install location is
suitable for drilling through.
Drill a 12mm hole through the mounting
bracket ring.
Ring
Connecting your App
to your Energizer
Download the
Gallagher Ag
Devices Mobile
App
Sign up or
login to your
Gallagher
account
Add your
energizer and
follow the on
screen prompts
1 2 3
Thread the cable through the hole and slide the App Gateway
down onto the mounting bracket.
Plug the App Gateway cable into the back of the energizer.
Note: If previously using an Energizer Controller, unplug the
controller first. The Energizer Controller is no longer required.
Plug the energizer back into the power source and use the
App Gateway power button to start the energizer.
Mounting bracket

3E5693 09/23
i Series App Gateway
Communication
The App Gateway communicates with your mobile
device using Bluetooth®when you are within range.
If Bluetooth is available, the App Gateway will always default to
Bluetooth connectivity. If you are connected to a WiFI network,
the App Gateway will automatically switch over to WiFi once you
leave Bluetooth range.
Add up to six Fence Monitors* to your fence line, to monitor
location specific voltage, receive performance alerts and know
the area where a fault is located.
*sold separately
am.gallagher.com