GAMA clinell User manual

Touch-free Hand Disinfection
Wall-mounted kit
SET UP
GUIDE

Set up guide
Carton contents
1. Box containing Clinell dispenser unit parts (including dispenser key)
2. Box containing backboard
3. 4 x D batteries
4. Drip tray (optional use)
Dispenser
Backboard
Batteries

*Caution: Backboard adhesive may damage walls on removal.
Step one
Placement of the backboard
Place backboard against wall in desired location
1. On the wall, mark through four drill holes A, B, C & D with a pencil.
2. Drill holes into the wall according to four marked points.
3. Insert 4 x rawl plugs into drilled holes.
4. Remove adhesive backing from backboard and carefully
line up holes A, B, C & D with drill holes.
5. Push backboard firmly against wall for 30 seconds*.
6. Gently peel away protective adhesive on front of backboard.
7. Dispose of all packaging as per local regulations.
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+
5
2
4
1
6
3
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+

Step two
Mounting the dispenser onto the backboard
1. Loosely screw 2 x screws through backboard into holes marked A & B.
2. Ensure battery cover is removed from dispenser unit.
3. Unpeel adhesive film from back of dispenser unit.
4. Carefully hook the open dispenser unit onto screws in holes
A & B, ensuring unit doesn’t stick to backboard.
5. Line up holes C & D with holes in backboard and press unit firmly in position for 30 seconds.
6. Screw 2 x screws through holes C & D into backboard, tighten screws in holes A & B.
1
4
2
5
3
6
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+
+
AB
+
AB
+
C
D
A
B
C
D
A
B
C
D
+
30
secs
30
secs
C
D
+

Step three
Dispenser set-up
1. Remove cap from gel refill cartridge by pulling the cap firmly.
2. Turn cartridge upside down, ensuring label is facing towards
the back of the dispenser unit and click into place.
3. Insert 4 x D batteries and replace battery cover.
4. Close dispenser unit and click shut.
5. Line up drip tray clips and press in the left side, followed by
the right side until firmly locked into position.
6. Place hand under dispenser unit multiple times to activate
gel (green light signifies unit is in operation).
1
4
2
5
3
6
X5
X5
X5
X5
X5
X5

Top tip
Place your Clinell Touch-free Hand
Disinfection wall mounted dispenser
near entrances and coffee/dining
areas for maximum compliance.
For further information visit:
www.gamahealthcare.com/hand-disinfection

JBN210489
GAMA Healthcare Ltd.,
The Maylands Building, Maylands Avenue, Hemel Hempstead, Hertfordshire, HP2 7TG, UK.
T: [phone] E: [e-mail] W: www.gamahealthcare.com