GameSir T4 pro User manual

GameSir T4 pro
User’s guide
Importer
Alza.cz a.s.
Jankovcova 1522/53
Holešovice 170 00 Prague 7
www.alza.cz

2
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before using for the first time and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or comments
about the device, please contact the customer line. Customer line, available 24 hours a
day: [phone], www.alza.co.uk.
SYSTEM REQUIREMENTS
Android 8.0
iOS 13 or above
Windows 7/10 or above
Mac OS

3
DEVICE LAYOUT
A. Left joystick
B. D-Pad
C. Select Button
D. Home button
E. Start button
F. Right joystick
G. ABXY button
H. Turbo button
I. Indicator
J. USB reciever

4
K. LB Button
L. RB Button
M. LT button
N. RT button
O. Type-C connector
P. Phone holder base
Q. Charging Indicator
R. M1 M3 button
S. M2 M4 button

5
Power On: Press and hold the HOME button for 2 seconds to power on.
Power Off: Press and hold the HOME button for 5 seconds to power off.
Pairing mode: According to the gamepad mode you want to apply, select a button-
combination to power on to enter the corresponding mode, which is to enter the pairing
mode.
Reconnect: The game controller will remember the last pairing record. The next time
you turn on, you don’t need the button-combination. Just press and hold the HOME
button and power on will automatically reconnect to the last paired device.
HOW TO USE THE PHONE HOLDER
Please insert the phone holder from the top gamepad

6
HOW TO CHARGE THE GAMEPAD
Use a charging cable to connect the Type-C interface on the top of the gamepad to the
USB charging port.
BATTERY STATUS
When the battery is below 15%, the current Charging Indicator will flash in RED quickly.
Charging indicator
Description
Red light stays on
Charging
Red light goes out
Fully charged

7
HOW TO CONNECT TO A COMPUTER OR ANDROID TV BOX VIA
USB RECEIVER
1. Plug the USB receiver into the USB port of your computer od Android TV box.
2. Press the X + HOME button until the gamepad is turned on.
3. The next time you connect to the computer, just press the HOME button to
power on, the gamepad will automatically connect.
NOTE: If the gamepad has been switched to another mode, you need to use the key
combination to restart.
HOME button indicator
Description
Mode indicator
Blue slow flash
Connecting
Blue fast flash
Pairing
Blue stay on
Connected

8
HOW TO CONNECT TO PC VIA A USB CABLE
Plug the USB cable to the USB port of your computer.
HOME button indicator
Description
Mode indicator
HOW TO CONNECT TO SWITCH OR SWITCH LITE VIA
BLUETOOTH
1. Go to the main interface of the Switch and click: Joy Con – change the grip/ order
and enter the pairing interface.
2. Press the Y + HOME button until the gamepad is turned on.
3. Gamepad will automatically pair with Switch or Switch Lite.
4. The next time you connect to Switch or Switch Lite, as long as you press the
HOME button to power on, the gamepad will automatically connect.
NOTE: If the gamepad has been switched to another mode, you need to use the key
combination to restart.
HOME button indicator
Description
Mode indicator
Blue slow flash
Connecting
Blue fast flash
Pairing
Blue stay on
Connected
In Switch or Switch Lite, the value of the A button and B button, X button and Y button of
the gamepad will be swapped

9
HOW TO CONNECT TO MOBILE PHONE VIA BLUETOOTH
PLAY ANDROID CONTROLLER-SUPPORTED GAMES
Refers to mobile games that support using a gamepad.
1. Press the A + HOME button until the gamepad is turned on.
2. Turn on the phone’s Bluetooth, search for GameSir-T4 pro gamepad, click and
pair.
3. The next time you connect, as long as you press the HOME button to power on,
the gamepad will automatically connect.
NOTE: If the gamepad has been switched to another mode, you need to use the key
combination to restart.
HOME button indicator
Description
Mode indicator
Blue slow flash
Connecting
Blue fast flash
Pairing
Blue stay on
Connected

10
PLAY APPLE ARCADE AND MFI GAMES
Refers to mobile games that support using a gamepad.
1. Press the B + HOME button until the gamepad is turned on.
2. Turn on the phone’s Bluetooth, search for Xbox Wireless Controller gamepad,
click and pair.
3. The next time you connect, as long as you press the HOME button to power on,
the gamepad will automatically connect.
NOTE: If the gamepad has been switched to another mode, you need to use the key
combination to restart.
HOME button indicator
Description
Mode indicator
Blue slow flash
Connecting
Blue fast flash
Pairing
Blue stay on
Connected

11
HOW TO CONNECT TO APPLE MAC VIA BLUETOOTH
1. Press the SELECT + HOME button until the gamepad is turned on.
2. Turn on the Apple MAC’s Bluetooth Bluetooth, search for GamepadX gamepad,
click and pair.
3. The next time you connect, as long as you press the HOME button to power on,
the gamepad will automatically connect.
NOTE: If the gamepad has been switched to another mode, you need to use the key
combination to restart. And back buttons programming is not supported in this mode.
HOME button indicator
Description
Mode indicator
Blue slow flash
Connecting
Blue fast flash
Pairing
Blue stay on
Connected
To learn more about Android controller-supported games, Apple Arcade games, MFi
games and how to use GameSir T4 pro, please scan the following QR code or refer to the
online advanced user guide.

12
BACK BUTTON FUNCTION
BACK BUTTONS LAYOUT
OTHER FUNCTIONS
Key binds
Description
Turbo + D-Pad’s Up & Down
Adjust the intensity of 5 levels of motor
vibration, 1 level is the highest, the
default is 1 level.
Hold L2, R2, R3 + D-Pad’s Up & Down
Adjust 5 levels of brightness of the
backlight, 1 level is the highest, the
default is 1 level.
Hold LB + RB for 5 seconds
Open/ Close backlight
TURBO COMBO FUNCTION
Combo function
Set/ Delete combo
Light Indication
Programmable
Buttons
Achieve fast attacks
in the game
Press and hold the
button that needs
to do a combo, and
then press the
Turbo button
The right joystick
backlight flashes
red means set
was done.
After deleting
the combo, the
right joystick
backlight returns
to blue.
A, B, X, Y, LB, RB, LT,
RT
A button
B
X
Y
Default button value

13
BACK BUTTONS PROGRAMMING
SINGLE BUTTON OR MULTIPLE BUTTONS CAN BE SET
Turbo mode
How to start
Description
Indicator tips
Triggered at
the same time
Any M button + SELECT
1. In Switch mode,
combination key
programming is not
supported, only single
key programming is
supported.
(In Apple Mac Mode,
back buttons
programming is not
supported.)
E.g.:
1. M1 + SELECT
enters the Same
Trigger
programming
mode
2. Press and hold
the button you
want to program.
3. Press and hold
the LB and R3
4. Press M1 again
to confirm.
5. Press M1 to
enable the LB and
R3 to be triggered
simultaneously
The red and blue
lights of the right
joystick backlight
circle are stay om
at the same time,
which means
entering the
programming
mode. The blue
light of the right
joystick backlight
circle is stay on,
which means the
programming is
completed.
Triggered in
sequence
Any M button + START
1. In Switch mode,
combination key
programming is not
supported, only single
key programming is
supported.
(In Apple Mac Mode,
back buttons
programming is not
supported.)
E.g.:
1. M1 + START
enters the
Sequential Trigger
programming
mode
2. Press and hold
the button you
want to program.
3. Press and hold
the LB first and
then Press and hold
the R3
4. Press M1 again
to confirm.
5. Press M1 to
enable the LB and
R3 to be triggered
in sequence
The red and blue
lights of the right
joystick backlight
circle are stay om
at the same time,
which means
entering the
programming
mode. The blue
light of the right
joystick backlight
circle is stay on,
which means the
programming is
completed.

14
NOTICE
Please read this carefully.
•CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek
immediate medical attention if swallowed or inhaled.
•DO NOT use the product near fire.
•DO NOT expose to direct sunlight or high temperatures.
•DO NOT leave the product in a humid or dusty environment.
•DO NOT impact the product or cause it to fall due to strong impact.
•DO NOT touch USB port directly or it might cause malfunctions.
•DO NOT strongly bend or pull cable parts.
•Use a soft, dry cloth while cleaning.
•DO NOT use chemicals such as gasoline or thinner.
•DO NOT disassemble, repair or modify.
•DO NOT use for purposes other than its original purpose. We are NOT
responsible for accidents or damage when used for non-original purposes.
•DO NOT look directly at the optical light. It might damage your eyes. If you have
any quality concerns or suggestions, please contact GameSir or your local
distributor.

15
WARRANTY CONDITIONS
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.

16
This product has been tested in accordance with the standards used to demonstrate
compliance with the essential requirements set out in the relevant directives. You can
find the declaration of conformity on the alza.cz website.
WEEE
This product must not be disposed of as normal household waste in accordance with
the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).
Instead it shall be returned to the place of purchase or handed over to a public
collection point for the recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in accordance with
national regulations.
All rights reserved. © 2020 Alza.cz a.s.