GameSir T4 User manual

GameSir • Gaming is Winning.™
© 2019 GameSir Inc. All rights reserved.
Product may vary slightly from those pictures. User Manual
GameSir T4
Wireless Controller

PACKAGE CONTENTS
SYSTEM REQUIREMENTS
REGISTRATION
Register your GameSir ID online at https://gamesir.hk/ to get real-time information on your
product's
warranty status and a series of exclusive benefits from GameSir.
YOUR BENEFITS
* 12-month replacement of the same model from the date you received it.
* Free online technical support at https://gamesir.hk/
GameSir T4 Wireless Controller
2.4 GHz Wireless Receiver
Type-C charging cable
Instruction Manual
Windows7/8/10

DEVICE LAYOUT
BACK Button
START Button
TURBO Button
A/B/X/Y Buttons
HOME Button
Backlight Loop
LED Light Indicators
D-Pad
Configurable Buttons（M1/M2/M3/M4）
Reset
LT Button
LB Button
Charging Light Indicator
Type-C Connector
RT Button
PB Button
2.4Ghz Dongle
USB Cable

DEVICE LAYOUT
BACK Button
START Button
TURBO Button
A/B/X/Y Buttons
HOME Button
Backlight Loop
LED Light Indicators
D-Pad
Configurable Buttons（M1/M2/M3/M4）
Reset
LT Button
LB Button
Charging Light Indicator
Type-C Connector
RT Button
PB Button
2.4Ghz Dongle
USB Cable

CONNECTION
a. Turn on Switch and select the following option:
"System Settings" - "Controllers and Sensors" - "Pro Controller wired Communication" ,
and turn it on.
b. Plug USB cable into the USB 2.0 port of Switch dock.
c. When the LED is always on, the connection is successful.
d. Connect Switch Lite to a Type-CtoUSBadapter that supports Switch system. ( Type-C
toUSBadapter needs to be purchased by yourself)
e. Plug the dongle into the USB port of the Type-CtoUSBadapter, and the dongle indicator
light flashes green and they are pairing. When the connection indicator light and the
dongle indicator light stay on in green, the connection is successful. When the connection
indicator light turns red and is on, the identification is successful.
Connect Switch Lite to a Type-C to USB adapter that supports Switch system. ( Type-C to
USB adapter needs to be purchased by yourself)
Connect Switch to T4 controller (wireless connection)
a. Turn on Switch and select the following option:
"System Settings" - "Controllers and Sensors" - "Pro Controller wired Communication" , and
turn it on.
b. Plug the dongle into the USB port of Switch dock.
c. Press HOME button to power on, and lights run through LED1, LED2, LED3, and LED4 to
begin the pairing.
d. When any LED is always on, the connection is successful.
Note: The Switch’s USB 2.0 port just supports the wired controllers, and the USB 3.0 port
does not support the wired controllers. Only two wired controllers can be used at the
same time via Switch.
Connect Switch to T4 controller ( wired connection) a. Connect GameSir T4 Wireless Controller to PC's USB port via Type-C charging cable.
b. When LED1+LED4 of GameSir T4 Wireless Controller stay on, Xinput Mode is connected
successfully.
c. The corresponding driver will be automatically installed on PC. GameSir T4 Wireless
Controller can be used normally.
* Hold Home button for 5 seconds, GameSir T4 Wireless Controller can switch between
Xinput Mode and Dinput Mode.
Xinput Mode: LED1+LED4 indicators stay on
Dinput Mode: LED1+LED3 indicators stay on.
Connect to PC via 2.4 GHz receiver (Xinput Mode)
a. Click Home button to turn on GameSir T4 Wireless Controller, LED indicator lights scroll
up and down, the controller can be connected.
b. Plug 2.4 GHz receiver into PC's USB port.
c. When 2.4 GHz receiver indicator lights up and LED1+LED4 of GameSir T4 Wireless
Controller stay on, Xinput Mode is connected successfully.GameSir T4 Wireless Controller
can be used normally.
* Hold Home button for 5 seconds, GameSir T4 Wireless Controller can switch between
Xinput Mode and Dinput Mode.
Xinput Mode: LED1+LED4 indicators stay on
Dinput Mode: LED1+LED3 indicators stay on
Connect to PC via Type-C charging cable (Xinput Mode)
(Dinput Mode) (Xinput Mode)

CONNECTION
a. Turn on Switch and select the following option:
"System Settings" - "Controllers and Sensors" - "Pro Controller wired Communication" ,
and turn it on.
b. Plug USB cable into the USB 2.0 port of Switch dock.
c. When the LED is always on, the connection is successful.
d. Connect Switch Lite to a Type-CtoUSBadapter that supports Switch system. ( Type-C
toUSBadapter needs to be purchased by yourself)
e. Plug the dongle into the USB port of the Type-CtoUSBadapter, and the dongle indicator
light flashes green and they are pairing. When the connection indicator light and the
dongle indicator light stay on in green, the connection is successful. When the connection
indicator light turns red and is on, the identification is successful.
Connect Switch Lite to a Type-C to USB adapter that supports Switch system. ( Type-C to
USB adapter needs to be purchased by yourself)
Connect Switch to T4 controller (wireless connection)
a. Turn on Switch and select the following option:
"System Settings" - "Controllers and Sensors" - "Pro Controller wired Communication" , and
turn it on.
b. Plug the dongle into the USB port of Switch dock.
c. Press HOME button to power on, and lights run through LED1, LED2, LED3, and LED4 to
begin the pairing.
d. When any LED is always on, the connection is successful.
Note: The Switch’s USB 2.0 port just supports the wired controllers, and the USB 3.0 port
does not support the wired controllers. Only two wired controllers can be used at the
same time via Switch.
Connect Switch to T4 controller ( wired connection) a. Connect GameSir T4 Wireless Controller to PC's USB port via Type-C charging cable.
b. When LED1+LED4 of GameSir T4 Wireless Controller stay on, Xinput Mode is connected
successfully.
c. The corresponding driver will be automatically installed on PC. GameSir T4 Wireless
Controller can be used normally.
* Hold Home button for 5 seconds, GameSir T4 Wireless Controller can switch between
Xinput Mode and Dinput Mode.
Xinput Mode: LED1+LED4 indicators stay on
Dinput Mode: LED1+LED3 indicators stay on.
Connect to PC via 2.4 GHz receiver (Xinput Mode)
a. Click Home button to turn on GameSir T4 Wireless Controller, LED indicator lights scroll
up and down, the controller can be connected.
b. Plug 2.4 GHz receiver into PC's USB port.
c. When 2.4 GHz receiver indicator lights up and LED1+LED4 of GameSir T4 Wireless
Controller stay on, Xinput Mode is connected successfully.GameSir T4 Wireless Controller
can be used normally.
* Hold Home button for 5 seconds, GameSir T4 Wireless Controller can switch between
Xinput Mode and Dinput Mode.
Xinput Mode: LED1+LED4 indicators stay on
Dinput Mode: LED1+LED3 indicators stay on
Connect to PC via Type-C charging cable (Xinput Mode)
(Dinput Mode) (Xinput Mode)

CONFIGURABLE M BUTTONS
B button
M1
A button
M2
X button
M4
Y button
M3
Default Key layout
TURBO FUNCTION
AUTOMATIC POWER OFF
a. Press the key where you want to set turbo function, press TURBO key simultaneously,
then back light turns into red and Turbo function is successfully set.
b. Press the key that is successfully set for Turbo function, press TURBO key simultaneously,
then back light turns into red and Turbo function is successfully canceled.
* The following buttons can be used to set for Turbo function: A, B, X, Y, LB, RB, LT, RT.
a. Hold M1 then START or BACK, the backlight loop turns red and blue simultaneously to
be set up.
b. Hold the keys you want to combine.
c. Press M1 again, the red backlight loop turns off. Combination is successfully set.
d. These keys can be set up as combination buttons: A, B, X, Y, L1, L2, L3, R1, R2, R3. They
can be freely combined, either combination keys or single button.
e. M2, M3, M4 have the same settings as M1. This function can be set up only when the
controller is successfully connected.
When GameSir T4 Wireless Controller is connected, it will automatically
power off within 180 seconds under no operation.
When GameSir T4 Wireless Controller is disconnected, it will automatically
power off within 30 seconds under no operation.
CHARGING
Hold Turbo then press up or down of D-pad to adjust vibration. The lowest level is vibration
off among 5 levels of vibration.
It takes 1.5 to 2 hours to full charge GameSir T4 Wireless Controller.
The charging indicator light keeps steady red during charging.
When fully charged, the charging indicator light goes off. Please unplug the Type-C charging
cable.
LIGHTING ADJUSTMENT AND MOTOR VIBRATION INTENSITY
ADJUSTMENT
Lighting adjustment:
Hold LT, RT, R3 simultaneously then press up or down of D-pad to adjust lighting. The lowest
level is light off among 5 levels of lighting.
ABXY backlight adjustment:
Hold LB+RB for 5 seconds to switch backlight on/off.
Motor vibration intensity adjustment:

CONFIGURABLE M BUTTONS
B button
M1
A button
M2
X button
M4
Y button
M3
Default Key layout
TURBO FUNCTION
AUTOMATIC POWER OFF
a. Press the key where you want to set turbo function, press TURBO key simultaneously,
then back light turns into red and Turbo function is successfully set.
b. Press the key that is successfully set for Turbo function, press TURBO key simultaneously,
then back light turns into red and Turbo function is successfully canceled.
* The following buttons can be used to set for Turbo function: A, B, X, Y, LB, RB, LT, RT.
a. Hold M1 then START or BACK, the backlight loop turns red and blue simultaneously to
be set up.
b. Hold the keys you want to combine.
c. Press M1 again, the red backlight loop turns off. Combination is successfully set.
d. These keys can be set up as combination buttons: A, B, X, Y, L1, L2, L3, R1, R2, R3. They
can be freely combined, either combination keys or single button.
e. M2, M3, M4 have the same settings as M1. This function can be set up only when the
controller is successfully connected.
When GameSir T4 Wireless Controller is connected, it will automatically
power off within 180 seconds under no operation.
When GameSir T4 Wireless Controller is disconnected, it will automatically
power off within 30 seconds under no operation.
CHARGING
Hold Turbo then press up or down of D-pad to adjust vibration. The lowest level is vibration
off among 5 levels of vibration.
It takes 1.5 to 2 hours to full charge GameSir T4 Wireless Controller.
The charging indicator light keeps steady red during charging.
When fully charged, the charging indicator light goes off. Please unplug the Type-C charging
cable.
LIGHTING ADJUSTMENT AND MOTOR VIBRATION INTENSITY
ADJUSTMENT
Lighting adjustment:
Hold LT, RT, R3 simultaneously then press up or down of D-pad to adjust lighting. The lowest
level is light off among 5 levels of lighting.
ABXY backlight adjustment:
Hold LB+RB for 5 seconds to switch backlight on/off.
Motor vibration intensity adjustment:

LOW BATTERY ALERT
RESET
GameSir T4 Wireless Controller shows low power condition (less than 10%)
when:
1. Battery voltage is less than 3.5V;
2. LED indicator light flashes;
3. Vibration is off.
Stick a slender pin into the Reset button on the back of GameSir T4 Wireless Controller to
reset. The controller will turn off and reboot. PC Windows 7(以降)
日本語
パッケージ内 容
システム要 件
ユーザー登録
https://gamesir.hk/にてGameSirIDを作成して、ご購入の製品を登録すると、当製品の品質保証
の状態に関するリアルタイム情報と、GameSir会員専用のメリットを得ることができます。
登録による特典
12ヵ月のメーカー限定保証
https://gamesir.hk/でのマニュアルの閲覧と無料オンラインテクニカルサポート（英語/日本語
対応）
GameSirT4コントローラー
Type-C充電ケーブル
2.4GHzドングル
GameSirT4コントローラー取扱説明書