Gardenline PGS-2800 User manual

Now you have purchased a
Gardenline® product you can rest
assured in the knowledge that as
well as your 3 year parts and
labour warranty you have the
added peace of mind of dedicated
helplines and web support.
MODEL NUMBER: PGS-2800
AFTER SALES SUPPORT
WEB SUPPORT www.servotool.eu
ART. NO. GSM6003 • PLU8856
UK/N.IRELAND HELPLINE NO 0905 1460005 £ 0.06/min
REP. IRELAND HELPLINE NO 1520 932626 E0,15/min
PGS-2800
GARDEN SHREDDER
POWERFUL 2800 W GARDEN SHREDDER
THE
POWER
GUIDE
Original instructions
With wheels
and transport
handle
3 Meter
cable
included
Large funnel
opening
2800 W

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
2
03 Introduction
04 General information
05 Safety instructions
12 Assembly instructions & Parts List
18 Operating instructions
22 Maintenance
24 Other useful information
25 Warranty card
26 Notes
Contents

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
3
Congratulations on choosing to buy a
GARDENLINE product.
By doing so you now have the assurance and peace of mind that
comes with purchasing a product made by one of Europe’s
leading manufacturers.
All products brought to you by Gardenline are manufactured to
the highest standards of performances and safety, and, as part of
our philosophy for customer service and satisfaction, are backed
by our comprehensive 3 year warranty.
We hope you will enjoy using your purchase for many years to
come.
Introduction 1

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
4
General information 2
For your own safety and for the safety of others, please
read these instructions carefully before using this
appliance. It will help you understand your product more
easily and avoid unnecessary risks. Keep this instruction
manual in a safe place for future use.
This unit is designed for occasional homeowner use and should
not be used for commercial purposes or subjected to heavy
continuous use.

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
5
Safety instructions 3
Explanation of symbols
Read instructions carefully
In accordance with essential applicable safety standards of
European directives
Denotes risk of personal injury, loss of life or damage to
the tool in case of nonobservance of the instructions in this
manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains electricity in
the case that the cord gets damaged and during
maintenance
Danger - Rotating blades. Keep hands and feet out of
openings while machine is running. The blades will
continue to rotate after the machine has been switched off.
Beware of objects being flung out.
Keep bystanders away
Do not use in rain
Sound power level
Wear ear and eye protection

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
6
Faulty and/or discarded electrical or electronic apparatus
have to be collected at the appropriate recycling locations.
General Safety Warnings
1. Shred only in daylight or good artificial light.
2. Never use the garden shredder in the rain or wet conditions.
Do not operate the garden shredder is poorly ventilated
areas, or in areas where flammable materials are present.
3. Do not tilt the garden shredder when the motor is switched
on.
4. During use, keep your face and body away from the feeding
chute. Always wear protective clothes.
5. Machinery must be operated on a flat surface. Do not
overreach. Never stand at a higher level then the base of the
machine when feeding material into it.
6. Do not allow material to build up in the discharge zone, this
may prevent proper discharge and result in a kickback of
material through the feed intake.
7. Switch off and wait until the blades have stopped rotating, if
the garden shredder has to be moved.
8. Do not put your hands in the feeding chute or near the
rotating blades.
9. Never pick-up or carry the garden shredder while the motor
is running.
10. The shredder must be used in the upright position only. Do
not operate the shredder if it is lying on its side.
11. Do not feed foreign objects such as stones, glass, metal, earth
or plastics into the garden shredder.
12. Switch off and disconnect from the mains supply:
– Whenever you leave the garden shredder unattended.
– Before clearing a blockage.
– Before checking, cleaning or working on the garden
shredder.
13. If the garden shredder starts to vibrate abnormally turn off
and check machine immediately.
14. Keep all handles and grips dry and clean. Make sure that all
exterior nuts, bolts and screws are tight and secure before
operating the garden shredder.

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
7
15. If you need to use an extension cable when using the garden
shredder, it should be rated at 8A minimum.
16. Use only extension cords recommended for outdoor use,
preferable with a high visibility cable colour.
17. For extension cables up to 15 metres, use a wire cross section
of 1.5 mm2. For extension cables over 15 metres but less than
40 metres, use a wire cross section of 2.5 mm2.
18. Always replace a damaged extension cable. Do not use if
damaged.
19. If the insulation on a power cable or extension lead is found
to be cut or damaged, do not touch it! Disconnect the power
supply immediately and have the damaged cable replaced.
Do not repair damaged cables.
20. Always switch off at the mains, before disconnecting any
plug, cable connectors or extension cables.
21. Always wind the cable carefully, avoiding kinking.
22. Always follow the manufacturer’s instructions.
NOTE.
1. Do not allow garden waste to accumulate before shredding
as it will begin to compost, become too damp and clog the
cutting assembly. Dry material will help to clear the ejection
chute. Save some dry sticks until last to help clean the blade
area.
2. Frequently monitor the build up/collection of shredded
material.
3. Do not allow shredded material to build up and fill the inside
of the shredder’s discharge chute.
4. When the collection box is full, always turn the garden
shredder off before emptying.
WARNING!
Do not put your hands up inside the shredder’s discharge chute
to clear away shredded material while the shredder is switched
on or connected to the mains supply.
NOTE.
In normal use, do not switch off the garden shredder until all of
the shredded material has cleared the cutter assembly.
If the garden shredder is switched off too quickly, remaining

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
8
pieces of material may clog the blade assembly
and stall the motor when the shredder is switched back on.
Specific safety instructions
If you are in any doubt whatsoever about using this appliance,
we strongly recommend that you employ the services of a
suitably qualified person.
• Keep children and pets well away from the work area and
never allow children to use this appliance or touch the main
power cord or extension cord at any time. When not in use,
keep this appliance stored in a safe place out of reach of
children.
• Wear ear protection and safety glasses at all times while
operating the machine.
• Only operate the machine in open space (e.g. not close to a
wall or other fixed object) and on a firm, level surface.
• Do not operate the machine on a paved or gravel surface
where ejected material could cause injury.
• Before starting the machine, check that all screws, nuts, bolts,
and other fasteners are properly secured and that guards and
screens are in place. Replace damaged or unreadable labels.
• Only use a waterproof, fully unwound extension cable suitable
for outdoor use.
• This appliance is for outdoor use only.
• Do not expose this appliance to rain.
• Keep the work area well lit.
• Never leave the appliance running unattended.
• Do not use the appliance in an area where it could cause an
explosion or fire - keep it away from flammable liquids and
gases.
• Always wear protective clothes, never wear loose clothing
that could get caught in the moving parts of the appliance.
• Always wear safety goggles and a dust mask when using this
appliance.
• Always wear heavy-duty outdoor gloves when using the
appliance.
• Pull long hair back out of the way and wear a protective hat.
• Guard against electric shock - prevent body contact with

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
9
earthed or grounded surfaces i.e. metal gates, posts or other
metal objects in the work area.
• Never pull the appliance by its power cord. Wheel it or carry
it with two hands.
• Do not allow the power cord to lay on or across sharp objects
that might pierce the outer insulation. Carry out a visual
inspection of the power cord before use and if it is damaged,
have it replaced by a specialist service centre. Do not use the
appliance if the cord is damaged.
• Keep the power cord away from heat, frost, oil, solvents or
any sharp objects or edges.
• Do not use this appliance if you are on strong medication,
unwell or have been drinking alcohol.
• Before starting the machine, look into the feeding chamber to
make certain that it is empty.
• Keep your face and body away from the feed intake.
• Do not allow hands or any other part of the body or clothing
inside the feeding chamber, discharge chute, or near any
moving part.
• Keep proper balance and footing at all times. Do not
overreach. Never stand at a higher level than the base of the
machine when feeding material into it.
• Always stand clear of the discharge zone when operating this
machine.
• When feeding material into the machine be extremely careful
that pieces of metal, rocks, bottles, cans or other foreign
objects are not included in the waste
• If the cutting mechanism strikes any foreign objects or if the
machine should start making any unusual noise or vibration,
shut off the power supply and allow the machine to stop
(Unplug the machine):
• inspect for damage
• check for and tighten any loose parts
• have any damaged parts replaced or repaired with parts
having equivalent specifications
• Do not allow processed material to build up in the discharge
tube; this may prevent proper discharge and can result in
kickback of material through the feed intake opening.
• If the machine becomes clogged, shutoff the power supply
(unplug the unit from supply) before clearing debris. Keep the
power supply clear of debris and other accumulations to

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
10
prevent damage to the power supply or possible fire.
Remember that operating the starting mechanism on engine
powered machines will still cause the cutting means to move.
• Allways keep all guards and deflectors in place and in good
working condition.
• Do not tamper with the power source governor settings; the
governor controls the safe maximum operating speed and
protects the power source and all moving parts from damage
caused by over-speed. Seek authorised service if a problem
exists.
• Do not transport this machine in operation.
• Shut off the power supply and disconnect from supply
whenever you leave the work area.
• Do not tilt the machine in operation.
• Your shredder must be placed on firm, level ground.
• Never lay the shredder on its back, front or sides - keep it
upright at all times.
• Do not overload the shredder - feed it slowly and let it work
at its own pace.
• Before starting, ensure the inlet cavity is empty. Do not start
the shredder with material in the shredder.
• Unless there is an emergency, do not switch the shredder off
until it is completely empty of material.
• Remove stones or other hard objects from plant roots before
shredding.
• Hold large twigs or fine branches firmly when feeding them
into the shredder.
• Do not allow the outlet to get covered or blocked at any
time.
Electrical safety
Check that the mains power supply corresponds to the
voltage printed on the appliance rating plate.
All electrical connections e.g. extension cable, must be of an
approved waterproof type for outdoor use and marked
accordingly. Extension cables must be three-core, one of which is
EARTH. Always fully unwind extension cables before use.

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
11
If in doubt consult a qualified electrician.
We strongly recommend the use of an RCD (Residual
Current Device) of not more than 30 mA, at the plug
socket when using this appliance.

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
12
6
7
5
1
4
Fig. A
4
3
2
Fig. B
Assembly & Parts list 4

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
13
Product information
Fig. A+B
1. Inlet
2. Forward / Reverse switch
3. Overload protector
4. On/off switch
5. Collection box
6. Frame
7. Wheel
Contents of packing
1 Main body
1 Frame
4 Screws + washers for frame
1 Collection bin
1 3 m Rubber extension cord
1 Axle
2 Wheel sets (incl. 4 washers, 2 bushes and 2 nuts)
2 Wheel caps
1 Allen key
1 Operating instructions
1 Quick set up guide
1 Warranty card
1 Warranty sticker
Check the machine, loose parts and accessories for transport
damage.

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
14
1
34
5
3
7
6
8
2
2
12
19

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
15
4
910
4
A
12
11
B
18
Spare parts list
No Description Postition
300793 Wheels set complete 1 - 7
300790 Feet complete 2pcs (set) 9 - 12
300791 Switchbox + switch 24 + 33
300792 Collection box locking knob 16 - 18

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
16

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
17
Fitting the transportation wheels
Fig. 1-4
You may need assistance when lifting the machine out
of the box and assembling.
1. Turn the leg bracket upside down and place it on the floor.
2. Position the axle tube between the two legs of frame.
3. Position the wheels on the axles.
4. Position the washers, wheel bushes, big washer and screw on each
wheel. Tighten both the wheel screws using a suitable spanner.
Note. The wheels must be fitted correctly to allow the nuts to
tighten on each end of the axle.
Push the wheel covers firmly onto the wheels.
Take care when tilting the unit onto its wheels as the
unit has an uneven weight distribution when tilted and
during wheeled transportation.
Fitting the units
Fig. 5-6
1. Postion the upper unit on the frame.
2. Use four screws and washers, and then tighten it with a
screwdriver.
Fitting the Collection box
Fig. 7-8
1. Push the collection box in the space under the upper unit.
2. Push the locking knob down when you assemble the collection
box until the box is positioned correctly. Push the locking knob
up to secure the collection box. The locking lever is equipped
with a safety switch. The garden shredder can only be activated
when the locking lever is in the upwards position.
Warning! Never attempt to put your hand inside the
shredder inlet cavity. If you want to push material into
cutting chamber use a suitable strong stick!

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
18
Starting the motor
1. Ensure that the shredder is empty before starting the motor.
2. Position the collection box below the shredder and lock it
with the hand grip of collection box (moving upwards).
3. Connect the shredder power cord to an appropriate
extension cord and plug it in to the mains power.
4. To start the motor, first make sure the Forward/Reverse
switch is in the forward position and then press the green
section of the on/off switch.
Stopping the motor
Stop the motor by pressing the red section of the on/off switch
marked with an ”O ”.
Do not feed in any material after the motor has been
stopped. This will get caught in the machine and can
make restarting impossible.
Changing direction of rotation
The rotation direction switch can only be used if the
shredder is switched off.
Forwards:
For forward action turn the forward/reverse switch down. The
cutting blades pull the material in and shred it.
Reverse position:
The cutting blades run in the opposite direction and release the
clogged material. Press the green on switch after you have
moved the forward/reverse switch up. The cutting blades run
now in the opposite direction. If you release the on/off switch,
the shredder will stop immediately.
Operating instructions 5

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
19
Overload protection
1. The shredder is equipped with a built-in motor protection,
which prevents the motor being overloaded. In the event of
overloading, the current is broken and the main switch is
turned off automatically.
2. Disconnect shredder from power supply before attempting to
unblock any jams.
Note: Allow at least 5 minutes for the motor to cool down.
3. Push in the overload protection button to reset, mains power
can now be switched on. If the cutting blades are jammed
turn the rotation direction switch to position, before switching
the shredder back on again, to clear any clogged material.
Mulching
The following types of material can be mulched in the shredder:
• Twigs and branches.
• Waste from cutting bushes.
• Waste from hedge-trimming.
Examples of materials which are not suitable for mulching include:
• Glass, metal, plastic bags, stones, fabric, earth covered roots.
• Waste that does not have a firm consistency, e.g. kitchen
waste.
• Soft Leafy material.
To prevent damage to the machine, you are recommended not
to exceed the following maximum sizes of twigs and branches:
• 45 mm in diameter.
The material that is to be mulched is fed into the inlet chute and,
assuming it is not too bulky, automatically pulled down through
the slowly rotating spiral cutter to the blades. Branches and
twigs should be mulched shortly after being cut. They become
extremely hard when they dry out, and the maximum diameter of
what can be mulched is reduced. Heavy material or twigs will jam
the blades if you let the machine cut continually. A large
proportion of garden waste contains a lot of water and therefore
sticks easily. Such material should be allowed to dry for a few
days before being processed.

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
20
Check all the material you want to shred carefully. Make sure it
doesn’t contain any stones or nails as this might severely damage
the shredder.
Be aware of vibrations. Heavy vibrations are caused by damaged
or worn out blades. Store the shredder indoors in a dry place.
Adjusting the cutting gear
The anvil blade should be adjusted the have a distance of 0.5 to
1mm from the cutting blade. This distance should be kept to
guarantee effective operation of the shredder.
Note: Soft materials or wet twigs can get torn instead of cut
properly due to incorrect blade adjustment. Also a blunt anvil
blade from frequent use produces the same problem.
On the right hand side of the shredder you will find the blade
adjustment knob. To adjust the distance, turn the screw to the right.
1. For lighter material, you can cut through the material
completely turn the allen key clockwise half a turn.
2. If you are shredding heavy materials (such as harder or large
materials) they may need to be put through the shredder
twice, to crush the material before cutting it completely. To
loosen the adjusting screw, turn the knob anti-clockwise half
a turn.
3. After you have completed the adjustment, check if the blade
cuts efficiently. To avoid and damage to the shredder make
sure that the cutting blade does not come into contact with
the anvil blade.
NOTE.
1. Do not allow garden waste to accumulate before shredding
as it will begin to compost, become too damp and clog the
cutting assembly. Dry material will help most material to clear
the ejection chute. Save some dry sticks until last to help
clean the blade area.
2. Frequently monitor the build up/collection of shredded
material.
3. Do not allow shredded material to build up and fill the inside
of the shredders discharge chute.
4. When the collection box is full, press the On/Off switch to
turn the garden shredder Off before emptying.