Garmin Alpha 300i User manual

Alpha®300i with Training
Owner’s Manual

© 2023 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change
or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to
www.garmin.com for current updates and supplemental information concerning the use of this product.
Garmin®, the Garmin logo, Alpha®, ANT®, ANT+®, City Navigator®, inReach®, and Xero® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries.
BaseCamp™, Garmin Explore™, Garmin Express™, Garmin HuntView™, Garmin Messenger™, Garmin ResponseSM, MapShare™, tempe™, and TT™ are trademarks of Garmin Ltd. or its
subsidiaries. These trademarks may not be used without the express permission of Garmin.
Apple® and Mac® are trademarks of Apple Inc., registered in the U.S. and other countries. The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by Garmin is under license. Iridium® is a registered trademark of Iridium Satellite LLC. microSD® and the microSDHC logo are trademarks of SD-3C, LLC. Wi‑Fi®
is a registered mark of Wi-Fi Alliance Corporation. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. Other trademarks and trade
names are those of their respective owners.

Table of Contents
Getting Started................................. 1
Setting Up the Alpha System.................. 1
Device Overviews.................................... 1
Alpha Handheld Device....................... 1
Dog Collar Device................................ 3
Installing the Battery Pack...................... 3
Charging the Handheld Device............... 4
Charging the Dog Collar Device..............5
Turning On the Device............................. 5
Turning Off the Device........................ 5
Selecting a Language..............................5
Using the Touchscreen........................... 5
Using the Status Page.............................6
Acquiring Satellite Signals...................... 6
Iridium® Satellite Network..................... 6
Activating the Device........................6
Dog Collar Device Setup................... 7
Methods to Add a Dog Collar Device to a
Handheld Device..................................... 7
Adding a Dog to the Alpha Navigator
Using Wireless Pairing........................ 7
Sharing a Dog Wirelessly.................... 8
Adding a Dog Using the Track and
Control Codes...................................... 8
VHF Radio Information....................... 8
Managing a Group................................... 9
Editing Dog Information.......................... 9
Resetting a Dog's Statistics and
Track.................................................... 9
Changing the Dog Name..................... 9
Changing the Color of the Dog's
Track.................................................... 9
Changing the Dog Type....................... 9
Changing the Dog ID......................... 10
Removing a Dog................................ 10
Fitting the Collar on Your Dog.............. 10
Communication with the Dog Collar
Device.................................................... 11
Using a Dynamic Update Rate.............. 12
Using Sleep Mode................................. 12
Using the Channel View........................ 12
Dog Tracking.................................. 12
Tracking Your Dog on the Map............ 13
Dog Status Icons................................... 13
Dog Tracking Compass........................ 14
Navigating to Your Dog.........................14
Changing the Length of the Dog's
Track...................................................... 14
Location Alerts...................................... 14
Setting Location Alerts..................... 15
Editing Location Alerts...................... 15
Enabling Dog Data Broadcast.............. 15
Dog Training...................................15
Selecting and Installing the Contact
Points..................................................... 16
Removing the Contact Points........... 16
Training Methods.................................. 16
Linear and Traditional Stimulation... 16
Choosing the Correct Intensity
Level................................................... 16
Customizing the Training Keys............ 17
Using the Hard Keys for Training
Adjustments.......................................... 17
Default Training Settings...................... 17
Collar Training....................................... 18
inReach Features............................18
Messages.............................................. 18
Sending a Check-In Message........... 18
Sending a Text Message.................. 19
Replying to a Message...................... 19
Checking for Messages.................... 19
Viewing Message Details..................19
Navigating to a Message Location.. 19
Including Location Coordinates in a
Message............................................ 20
Deleting Messages............................20
Messages Settings............................20
inReach Tracking.................................. 20
Starting Tracking............................... 20
Stopping Tracking............................. 20
Sharing Your MapShare Web Page.. 20
inReach Tracking Settings................ 20
SOS.........................................................21
Initiating an SOS Rescue...................21
Sending a Custom SOS Message.... 22
Canceling an SOS Request............... 22
Weather..................................................22
Table of Contents i

Requesting an inReach Weather
Forecast............................................. 22
Testing the Device.......................... 23
Connected Features....................... 23
Pairing a Smartphone with Your
Device.................................................... 23
Connecting to a Wireless Network.......24
Garmin Explore...................................... 24
Garmin Messenger App........................ 24
Syncing inReach Data..................... 24
Contact Tracking............................ 24
Turning On and Off the Transmitter..... 25
Methods to Add a Contact to a Handheld
Device.................................................... 25
Adding a Contact Using Wireless
Pairing.................................................... 25
Adding a Contact Using a Contact ID.. 25
Initiating an Emergency Alert............... 26
Sending a Message to Your
Contacts................................................ 26
Tracking a Contact................................ 26
Finding Your Contact ID........................ 26
Changing Your Contact ID.................... 26
Updating a Contact ID........................... 26
Hunting with the Alpha System....... 27
Marking Your Truck Location............... 27
Marking a Covey....................................27
Active Hunt Metrics.............................. 27
Turning On the Collar Light...................27
Turning On Rescue Mode..................... 28
Pausing Dog Tracking...........................28
Waypoints, Routes, and Tracks....... 28
Waypoints.............................................. 28
Marking Your Current Location........ 28
Marking a Waypoint Using the
Map.................................................... 28
Editing a Waypoint............................ 28
Repositioning a Waypoint to Your
Current Location................................ 29
Moving a Waypoint on the Map........29
Increasing the Accuracy of a Waypoint
Location............................................. 29
Projecting a Waypoint....................... 29
Deleting a Waypoint.......................... 29
Routes.................................................... 29
Creating a Route................................ 30
Editing the Name of a Route.............30
Navigating a Saved Route.................30
Editing a Route.................................. 30
Reversing a Route............................. 30
Viewing the Active Route.................. 30
Deleting a Route................................ 30
Tracks.................................................... 30
Recording Track Logs....................... 31
Viewing Details about the Track.......31
Viewing the Elevation Plot of a
Track.................................................. 31
Navigating to the Start of a Track.... 31
Changing the Track Color................. 31
Saving the Current Track.................. 31
Clearing the Current Track................ 31
Deleting a Track.................................31
Navigation...................................... 32
Map........................................................ 32
Measuring Distance on the Map.......... 32
Compass................................................32
Calibrating the Compass.................. 32
Navigating with the Bearing
Pointer................................................ 32
Where To? Menu................................... 32
Finding a Waypoint by Name............ 32
Navigating with Sight 'N Go.................. 33
Elevation Plot.........................................33
Calibrating the Barometric
Altimeter............................................ 33
Navigating to a Point on the Plot..... 33
Changing the Plot Type..................... 33
Resetting the Elevation Plot..............33
Trip Computer....................................... 33
Customizing the Trip Computer Data
Fields.................................................. 33
Resetting the Trip Computer............ 33
Applications................................... 34
Setting a Proximity Alarm..................... 34
Calculating the Size of an Area............ 34
ii Table of Contents

Setting an Alarm....................................34
Using the Competition Timer............... 34
Satellite Page........................................ 34
Changing the Satellite View.............. 34
Turning Off GPS.................................34
Simulating a Location....................... 35
Managing Maps.................................... 35
Downloading Maps........................... 35
Enabling Maps................................... 35
Deleting a Map...................................36
Customizing Your Device................36
Customizing the Main Menu................ 36
Customizing the Favorite Bar............... 36
Customizing the Data Fields................ 36
System Settings.................................... 36
Display Settings.....................................37
Accessibility Settings........................ 37
Setting the Device Tones...................... 37
Setting Dog Alerts............................. 37
Map Settings......................................... 37
Tracked Devices Map Settings......... 37
Advanced Map Settings.................... 38
Tracks Settings..................................... 38
Auto Save Settings............................ 38
Routing Settings.................................... 39
Sensors Settings................................... 39
Changing the Units of Measure............39
Position Format Settings...................... 39
Device Information......................... 39
Viewing E-label Regulatory and
Compliance Information....................... 39
Support and Updates............................ 40
Product Updates................................40
Device Care............................................40
Cleaning the Device...........................40
Cleaning the Touchscreen................ 40
Specifications........................................41
Alpha Handheld Device
Specifications.................................... 41
Dog Collar Device Specifications..... 41
Battery Information............................... 41
Long-Term Storage........................... 42
Maximizing the Battery Life.............. 42
Saving Energy While Charging the
Device.................................................... 43
Data Management................................ 43
Installing a Memory Card.................. 43
Connecting the Handheld Device to a
Computer........................................... 44
Connecting the Dog Collar Device to a
Computer........................................... 44
Transferring Dog Tracks to
BaseCamp™....................................... 44
Deleting Files..................................... 45
Disconnecting the USB Cable........... 45
Resetting Data and Settings............. 45
Appendix........................................ 45
Accessories and Replacement Parts...45
Purchasing Accessories................... 45
tempe................................................. 45
Tips for Pairing Wireless Sensors.... 46
Replacing the Collar Strap................ 46
Changing the Fuse in the Vehicle
Power Cable.......................................46
Data Field Options.................................47
Table of Contents iii

Getting Started
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Setting Up the Alpha System
Before you can use the Alpha system, you must set up the devices.
1Charge the handheld device (Charging the Handheld Device, page4).
2Charge the dog collar device (Charging the Dog Collar Device, page5).
3Turn on the devices (Turning On the Device, page5).
4Select a language (Selecting a Language, page5).
5If necessary, pair the dog collar device with the handheld device (Methods to Add a Dog Collar Device to a
Handheld Device, page7).
6If necessary, calibrate the compass on the handheld device (Calibrating the Compass, page32).
Device Overviews
Alpha Handheld Device
NOTICE
Avoid using a high-powered radio (greater than 5 W) in close proximity to the handheld device. It may cause
irreversible damage to the handheld device.
Getting Started 1

Satellite antenna
VHF radio antenna
Mounting spine
microSD® memory card slot (under battery)
Battery cover D-ring
USB port (under weather cap)
Alpha Device Keys
Power key
Customizable training keys
Training up
Training down
Training enter
SOS key (under protective cap)
2 Getting Started

Dog Collar Device
NOTE: Your dog collar device may look different than the device pictured.
VHF antenna
GPS antenna
Power button
Contact points
Status LED
Flashing beacon LEDs
Installing the Battery Pack
1Turn the D-ring counter-clockwise, and pull up to remove the cover.
2Locate the metal contacts on the end of the lithium-ion battery.
3Insert the battery into the compartment, contacts first.
4Press the battery into place.
5Replace the battery cover, and turn the D-ring clockwise.
Getting Started 3

Charging the Handheld Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or
connecting to a computer.
NOTE: The device does not charge when it is outside the approved temperature range (Alpha Handheld Device
Specifications, page41).
You should fully charge the battery before you use the device for the first time. Charging a fully depleted battery
takes about 4 hours.
1Lift the weather cap .
2Plug the small end of the power cable into the USB port on the device.
3Plug the other end of the power cable into an appropriate power source.
The LCD display on the handheld device shows the current battery charge level.
4 Getting Started

Charging the Dog Collar Device
NOTICE
To prevent corrosion, thoroughly dry the contacts on the dog collar device and the surrounding area before
connecting the charging clip.
NOTE: Your dog collar device may look different than the device pictured.
You should fully charge the battery before you use the dog collar device for the first time. Charging a fully
depleted battery takes about five hours.
1Snap the charging clip onto the dog collar device .
2Plug the small end of the power cable into the USB port on the charging clip.
3Plug the power cable into a power source.
The status LED is solid red when the collar is charging.
4After the status LED turns solid green, remove the charging clip from the collar.
Turning On the Device
• On the handheld device, press the power button.
• On the dog collar device, hold the power button until the status LED flashes and the collar beeps.
Turning Off the Device
• On the handheld device, hold the power button until the LCDscreen turns off.
• On the dog collar device, hold the power button until the status LED turns solid red.
Selecting a Language
When you turn on your device for the first time, you will select the device language from a list of available
languages. You can change the language setting from the System settings.
1From the main menu, select > System > Language.
2Select a language.
Using the Touchscreen
• Select to open a menu.
• Select to return to the home screen.
• Select to return to the previous page.
• If you are more than one menu away from the home screen, select and hold to return to the home screen.
• If scroll controls are enabled, select and to scroll (Accessibility Settings, page37).
Getting Started 5

Using the Status Page
The status page displays the time, your GPSsignal strength, and the device battery life. It also allows you to
adjust settings and access shortcuts. You can open the status page from any other page by pressing the power
button.
Screen brightness: Adjusts the brightness of the screen.
Messages: Allows you to send inReach® messages and view received messages.
Lock Screen: Locks the touchscreen to prevent inadvertent screen touches.
Lock Keys: Locks the device buttons to prevent inadvertent button presses.
My ID: Displays your device ID and allows you to transmit your device information to a compatible handheld
device. You can also turn the transmitter on and off.
Alerts: Displays unread dog alerts.
Acquiring Satellite Signals
Both the dog collar device and navigator must acquire satellite signals before you put the dog collar device on
your dog. Acquiring satellites can take a few minutes.
1Go outdoors to an open area.
2Turn on both devices (Turning On the Device, page5).
in the status bar shows the GPS signal strength.
When the dog collar device has acquired satellite signals, the status LED flashes green.
Iridium®Satellite Network
Your device requires a clear view of the sky to transmit messages and track points over the Iridium satellite
network. Without a clear view of the sky, your device attempts to send the information until it acquires satellite
signals.
TIP: For the best connection with satellites, place the device with the antenna pointed toward the sky.
Activating the Device
WARNING
Before you can use the inReach features of your Alpha 300i device, including messaging, SOS, tracking, and
inReach Weather, you must activate it.
1From your computer or smartphone, go to explore.garmin.com to create an account and activate a service
plan.
2Turn on the device.
3Select Activate.
4Follow the on-screen instructions.
NOTE: You must enter the device IMEI number and authorization code to complete the online portion of
activation before you go outdoors.
5Go outdoors to an open area with a clear view of the sky, and point the antenna on the device toward the sky
for optimal performance.
6Wait while the device communicates with the Iridium satellite network.
NOTE: It may take up to 20 minutes to activate your device. The device must send and receive several
messages, which takes longer than sending a single message during regular use. Your device should remain
outdoors until activation completes.
6 Activating the Device

Dog Collar Device Setup
Methods to Add a Dog Collar Device to a Handheld Device
If you purchased the dog collar device and the handheld device separately, you must add the dog collar device
to the handheld device. You can add up to 250 devices to one handheld device by using MURS/VHF, entering the
track and control codes, or by sharing wirelessly using ANT+® technology. Up to 20 devices can be active at one
time.
Using MURS/VHF: Allows you to add a dog collar device after you have placed the dog collar device into pairing
mode by pressing the power key.
This method is helpful when you are adding a new accessory collar to the system prior to leaving for the hunt
(Adding a Dog to the Alpha Navigator Using Wireless Pairing, page7).
Entering the track and control codes: Allows you to add a dog collar device that you do not own and that is not
in the area. The dog's owner must determine if you can only track the dog or can track and control the dog.
This method requires the dog's owner to find and communicate the codes to the person adding the dog collar
device.
This method is helpful when you would like to add a dog collar device during a hunt, but you are not near the
dog. For example, you are adding another member of your hunting party's dog collar device to your handheld
device, but you do not own the dog collar device (Adding a Dog Using the Track and Control Codes, page8).
NOTE: This feature varies based on dog collar device type and feature availability in your area. You may see
track codes only or track and control codes.
Sharing wirelessly using ANT+ wireless technology: Allows you to add a dog collar device that you do not
own and that is not in the area. The dog's owner must determine if you can only track the dog or can track
and train the dog. This method does not require the dog's owner to find and communicate the codes to
the person adding the dog collar device. This method also adds dog information, such as the dog's name,
communication settings, and initial position, from the sending handheld device to your device. The two
handheld devices must be within range 3m (10ft.) to share data wirelessly.
This method is helpful when you want to add a dog collar device during a hunt, but you are not near the dog.
For example, the dogs have already been let loose, and you are near the dog owner, who can share the dog
wirelessly (Sharing a Dog Wirelessly, page8).
Adding a Dog to the Alpha Navigator Using Wireless Pairing
To pair wirelessly, the dog collar device must be within range of the Alpha navigator.
1Hold the power button on the dog collar device until the device emits two series of beeps (about 2 seconds),
and then release the power button.
The status LED flashes blue. The dog collar device is now ready to be paired with a navigator.
2On the navigator, select Dog List > Add Dog.
3Select Pair Collar, and follow the on-screen instructions.
4After successfully adding the dog collar device, enter the name of the dog, and select .
5Select a beacon color for this dog collar device, and select .
Dog Collar Device Setup 7

Sharing a Dog Wirelessly
Before you can share data wirelessly over ANT+, you must bring your Alpha handheld device within 3 m (10 ft.)
of the other handheld device.
1Select Dog List.
2Select the dog to share.
3Select > Share Wirelessly.
4Select an option:
• To allow the other person to track your dog's location with the map and dog tracking compass, select
Track Only.
• To allow the other person to track your dog and correct your dog's behavior, select Track and Control.
To successfully share the dog collar device, the other handheld device must be receiving the device
information (Adding a Dog to the Alpha Navigator Using Wireless Pairing, page7).
Adding a Dog Using the Track and Control Codes
NOTE: This feature varies based on dog collar device type and feature availability in your area.
Before you can add a dog using the track and control codes, the dog owner must find the track and control
codes (Finding the Dog ID and Track and Control Codes, page8) and tell them to you.
You can use track and control codes to authorize a handheld device to interact with your dog collar device. If
you are not near the dog you want to add or you cannot put the collar into pairing mode, you can add the dog
using the track and control codes.
1Select Dog List > Add Dog.
2Select Enter Track or Control Code.
3Enter the track or control code for the collar, and select .
The dog’s track code allows you to track the dog. The dog’s control code allows you to both track and train
the dog.
4Enter the name of the dog, and select .
Finding the Dog ID and Track and Control Codes
You can share a dog’s track code so another person can track your dog. Also, you can share a dog’s control
code so another person can track and train your dog.
1Select Dog List.
2Select a dog.
The track code and the control code are displayed under the dog's name.
VHF Radio Information
This product may be used only on specific radio frequencies, which vary depending on the country of use.
The navigator and dog collar device allow the user to install a different antenna. Changing the antenna can
result in improved radio performance and higher radiated power. You must not use the device with a third party
antenna or an antenna not approved by Garmin®. Go to www.garmin.com/tracking-legal for details about the
performance and radio frequency of this product, lawful accessories, and power limits for countries.
8 Dog Collar Device Setup

Managing a Group
Before you can create a group, you must pair one or more dog devices to your handheld.
1Select Dog List.
2Select .
3If necessary, select Create Group, enter a group name, and add devices to the group.
4Select a group from the list.
5Select an option:
• To activate the group, select Activate Group.
• To deactivate the group, select Deactivate Group.
• To add a device to the group, select > Manage Group > Add Device.
• To rename the group, select > Rename, and enter a new name.
• To delete the group, select > Delete Group.
Editing Dog Information
Resetting a Dog's Statistics and Track
You might want to clear the dog statistics and track before a new hunt.
1Select Dog List.
2Select a dog.
3Select > Reset.
Changing the Dog Name
1Select Dog List.
2Select a dog.
3Select the dog’s name.
4Enter the name, and select .
Changing the Color of the Dog's Track
You can change the track color of the dog. It is helpful to have the track color match the color of the collar strap,
if possible.
1Select Dog List.
2Select a dog.
3Select the colored square next to the dog’s name.
4Select a color.
Changing the Dog Type
Before you can change the dog type, the collar must be turned on and within range of the handheld device.
1Select Dog List.
2Select a dog.
3Select > Change Dog Type.
4Select a dog type.
Dog Collar Device Setup 9

Changing the Dog ID
Before you can change the dog ID, the collar must be turned on and within range of the handheld device.
If you are experiencing interference from other collars or handheld devices in the area, you might need to
change the ID for the dog.
1Select Dog List.
2Select a dog.
3Select > Change ID.
4Select an available ID.
If another handheld device is tracking this dog, for best results, remove the dog from the device, and use the
track and control codes to add the dog again (Adding a Dog Using the Track and Control Codes, page8).
Removing a Dog
1Select Dog List.
2Select a dog.
3Select > Remove.
Fitting the Collar on Your Dog
CAUTION
To prevent irritation from the contact points, remove the collar for at least eight hours out of every 24-hour
period.
This device is not intended for human use. Do not attempt to use on any person.
Do not spray the device or collar with harsh chemicals including but not limited to flea or tick spray. Always
ensure that any flea or tick spray that is applied to the dog is completely dry before placing the collar on the dog.
Small amounts of harsh chemicals can damage the plastic components and collar strap.
Before you can put the collar on the dog, you must pair the navigator and dog collar device (Methods to Add
a Dog Collar Device to a Handheld Device, page7), and acquire satellite signals (Acquiring Satellite Signals,
page6).
In order to effectively train the dog, the collar must fit the dog properly. If the collar is too loose or positioned
incorrectly, stimulation may be inconsistent. This can delay or prevent successful training.
1Position the collar with the communication antenna pointing up, the GPS antenna facing up, the LEDs facing
forward, and the contact points against the neck.
2Place the collar around the middle of the dog's neck.
10 Dog Collar Device Setup

3Tighten the strap so that it is snug around the dog's neck, and fasten the buckle.
NOTE: The collar should fit tightly and should not be able to rotate or slide on the dog's neck. The dog must
be able to swallow food and water normally. You should observe your dog's behavior to verify that the collar
is not too tight.
4Wiggle the device to work the contact points through the dog's coat.
NOTE: The contact points must have contact with the dog's skin to be effective.
5If the strap is too long, cut off the excess, leaving at least 7.62cm (3in.) to spare.
TIP: You can mark the hole used to fasten the buckle for future reference.
Communication with the Dog Collar Device
You should keep an unobstructed line of sight between your navigator and dog collar device to produce the best
communication signal. To achieve the best line-of-sight conditions, you should move to the highest elevation
point in your area (for example, on the top of a hill).
Best
Good
Poor
Dog Collar Device Setup 11

Using a Dynamic Update Rate
When you are actively tracking your dog, the dog collar device can use a dynamic update rate to help conserve
battery power based on the activity of your dog.
1Select Dog List.
2Select a dog.
3Select Update Rate > Dynamic.
Using Sleep Mode
Before you can enter sleep mode, you must track your dog's location using the compatible dog collar device.
When paired with a navigator, the dog collar device can be put into sleep mode to conserve the battery when
you are not actively tracking your dog.
1Select Dog List.
2Select a dog.
3Select > Adjust Collar Sleep Mode.
4Select an option:
• Select Sleep to enter sleep mode.
• Select Wake to exit sleep mode.
Using the Channel View
Both your Alpha handheld navigator and dog collar device broadcast data over individual channels. Channels
are identified using unique IDs. You can update your ID to maintain a clear signal and avoid interference from
other dog devices.
1Select > Channel View.
2Select My Devices to see what channel your devices are on.
3Select or .
4Select a new ID.
5Select Yes.
6Select a dog.
NOTE: Your dog collar device must be active and tracking on your handheld.
7Select OK.
Dog Tracking
The navigator allows you to track your dog or multiple dogs, using the tracking compass or map. The map
displays your location and your dog's location and tracks. The compass pointer indicates the direction of the
dog's current location.
12 Dog Tracking

Tracking Your Dog on the Map
Before you can track a dog on the map, you must add it to the handheld device (Adding a Dog to the Alpha
Navigator Using Wireless Pairing, page7).
You can view the dog's location on the map.
1From the home screen, select .
2If necessary, select and to zoom in and out of the map.
TIP: You can select to track the dog using the dog tracking compass (Dog Tracking Compass, page14).
Dog Status Icons
Sitting
Running
On point
Treed
Unknown1
1 The unknown status icon indicates that the handheld device cannot communicate with the dog collar device.
Dog Tracking 13

Dog Tracking Compass
To open the dog tracking compass, select .
You can use the dog tracking compass to view the direction and distance to your dog, your vehicle, and any
paired devices. The dog tracking compass also shows the dog's status, such as running or on point (Dog Status
Icons, page13). The color of the pointer corresponds to the color of the track.
The dog tracking compass is most accurate when the dog, vehicle, or paired device is more than 9.1m (30ft.)
away. When the dog, vehicle, or paired device is less than 9.1m (30ft.) away, "Near" appears.
TIP: You can open an alternative view of the compass by selecting > Pro View.
Navigating to Your Dog
1Select Dog List.
2Select the dog.
3Select > Go.
4Follow the colored line to the dog.
Changing the Length of the Dog's Track
You can adjust the length of time the dog track appears on the map. Reducing the duration of the track can
reduce the clutter on the map. Changing the map does not affect the tracks stored in the handheld device.
1Select > Map > Tracked Devices > Dog Tracks on Map.
2Select a time frame.
Location Alerts
Location alerts notify you when your dogs enter or exit a particular location. You can create a custom geofence
or use a radius around your current location.
A geofence is an invisible boundary around an area and is created using points on the map. The virtual
boundaries of a geofence are accurate up to approximately 3m (10ft.). Geofences perform best when sized to
cover an area encompassing an average sized backyard (approximately ¼acre).
14 Dog Tracking