Garmin Montana 650 User manual

Garmin 650 Quick Reference
Physical Inputs
Upper-left knob
(Turn) Volume
(Push) Squelch / Nav ID
[HOME]
(Push) Home page
(Push & Hold) Default Nav Page
[D->]
Direct-to
Lower-right
concentric knob
(Turn) Selection
(Push) Toggle Nav/Com
Default Nav Data Fields
DIS (Distance)
DTK (Desired Track)
BRG (Bearing)
GS (Ground Speed)
TRK (Ground Track)
ETE
Moving Map Data Fields
ACTV WPT (Active Waypoint)
DTK (Desired Track)
GS (Ground Speed)
DIS (Distance)
Nav/Com Entry
Swap active & standby
frequencies
Tap active frequency -or-
Push & hold lower-right knob
Tune standby
Tap standby frequency -or-use lower-right knob
Swap nav/com entry
Push the lower-right knob once
Direct-To Functions
1. Direct to any given waypoint
2. Direct to any waypoint in the active flight plan
3. Direct to the nearest airport
Moving Map Declutter
1. Tap the “Menu”soft-key (left-hand side of the screen)
2. Tap the horizontal line of the “Map Detail”slider for the
declutter level desired
3. Tap the “Back” soft-key (lower left-hand side of the screen)

Garmin 650 Quick Reference
Pairing a Device
1. Press Home
2. Tap “System”
3. Tap “Connext Setup”
4. Tap “Bluetooth Setup”
5. [Device-specific] On
your device, go to your
“Bluetooth settings
page” and select the
FlightStream device
name to pair with
6. On the 650, tap “Yes”
when prompted to
accept the pairing
7. Accept the pairing on
your tablet if applicable
8. If pairing doesn’t work:
a) Turn your
device off and
back on
b) Unpair an
existing device
c) Turn off
Bluetooth on all
other devices
Unpairing a Device
1. Press Home
2. Tap “System”
3. Tap “Connext Setup”
4. Tap “Bluetooth Setup”
5. Tap “Manage Paired
Devices”
6. Scroll through the list to
the device you want to
unpair and tap
“Remove”
Flight Plan Import
1. [Device-specific] From
your device, initiate a
flight plan transfer to
the 650
2. The “MSG” status will
flash on the 650 when
it has received the flight
plan
3. Tap “MSG” and then
tap “New FPL” for the
flight plan you want to
import
4. If the previewed flight
plan is correct, tap
“Store” or “Active”