Gateway 23-inch User manual

Setting up Troubleshooting
Your Gateway Remote Control
user'sguide

i
Contents
Remote Control User’s Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Remote control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Inserting batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Programming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Component program codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Searching for component codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reassigning component buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Changing volume lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Teaching the remote control new functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing OSD options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setting a password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

ii

1
1
Remote Control
User’s Guide
Read this guide to learn how to:
■Identify the remote control buttons
■Insert the batteries
■Program the remote control
■Use the remote control
■Troubleshoot typical problems
© 2003 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway
stylized logo, and the black-and-white spot design are trademarks or registered
trademarks of Gateway, Inc. in the United States and other countries. All other brands
and product names are trademarks or registered trademarks of their respective
companies.

2
Remote Control User’s Guide
www.gateway.com
Remote control buttons
Button Function
SETUP. Starts all programming sequences.
Remote LED. Blinks when the remote is being
programmed or is sending a signal to your
LCD TV.
POWER. Turns the selected component on and
off.
Programs the remote control to recognize a
component. For programming instructions, see
“Programming the remote control” on page 7.
TV. Selects a programmed TV. Pre-programmed
for your 23-inch or 26-inch LCD TV.
DVD. Selects a programmed DVD player.
Pre-programmed for Gateway’s DVD player.
VCR. Selects a programmed VCR.
TV2. Selects a second programmed TV.
Pre-programmed for Gateway’s 42-inch or
50-inch plasma TV.
CBL/SAT. Selects a programmed cable TV
set-top box or selects a programmed satellite TV
set-top box.
AMP. Selects a programmed amplifier.
CD. Selects a programmed CD player.
AUX. Selects a programmed component.
Pre-programmed for Gateway’s Media
Center PC.

3
Remote control buttons
www.gateway.com
Number button pad. Selects a channel or
enters a password.
MUTE. Turns the sound on and off.
100. Scans four channels at a time in TV mode.
Works as an Enter button in other video modes.
VOL. Turns volume up or down.
LAST. Recalls the previously viewed channel.
SLEEP. Turns on the sleep timer.
INPUT. Changes the input source.
CH. Changes the channel.
Button Function

4
Remote Control User’s Guide
www.gateway.com
WIDE/GUIDE. Cycles through standard and
widescreen viewing modes or accesses
programming guides, such as the one that
comes with a satellite dish. GUIDE does not
work in TV mode.
INFO. Shows the current status of your LCD TV,
such as the video input source, audio status,
and channel number.
, , , . Navigates the on-screen display
(OSD) menus.
OK. Works as the Enter button.
EXIT. Closes the component, guide, or OSD
menus.
MENU. Enters the OSD menus.
Reverse. Rewinds the CD, DVD, or VCR
when the component is activated with the
remote control.
Play. Plays the CD, DVD, or VCR when the
component is activated with the remote control.
Forward. Forwards the CD, DVD, or VCR
when the component is activated with the
remote control.
Record. Records the CD, DVD, or VCR when
the component is activated with the remote
control.
Stop. Stops the CD, DVD, or VCR when the
component is activated with the remote control.
Pause. Pauses the CD, DVD, or VCR when
the component is activated with the remote
control.
Button Function
Universal Remote OFR-102.03

5
Remote control buttons
www.gateway.com
FREEZE. Freezes the display image.
ZOOM. Turns ZOOM mode on and off.
AUDIO. Selects STEREO, SAP, or MONO when
in TV mode.
PIP. Turns picture-in-picture (PiP) mode on and
off.
PIP mode does not work when parental controls
are set.
YPbPr. Selects the component connected to
component video connector as the input source.
CC. Turns CLOSED CAPTION mode on and off.
RGB. Selects the component connected to the
RGB connector as the input source.
DVI. Selects the component connected to the
DVI connector as the input source.
TV. Selects TV as the input source.
AV1. Selects the component connected to the
AV1 connector as the input source.
AV2/S2. Selects the component connected to
AV2 connector as the input source.
AV3. Selects the component connected to the
AV3 connection as the input or output source.
Button Function

6
Remote Control User’s Guide
www.gateway.com
Inserting batteries
To install batteries:
■Insert two AA batteries into the remote control. Make sure that you match
the +and –on the batteries with the +and –symbols inside the battery
compartment.