Gateway 46-inch User manual

Setting up Troubleshooting
Your Gateway Remote Control
user'sguide

i
Contents
Remote Control User’s Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Remote control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Inserting batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Programming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Component program codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Searching for component codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reassigning component buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Changing volume lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Teaching the remote control new functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing OSD options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setting a password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

ii

1
Remote Control
User’s Guide
Read this guide to learn how to:
■Identify the remote control buttons
■Insert the batteries
■Program the remote control
■Use the remote control
■Troubleshoot typical problems
© 2003 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway
stylized logo, and the black-and-white spot design are trademarks or registered
trademarks of Gateway, Inc. in the United States and other countries. All other brands
and product names are trademarks or registered trademarks of their respective
companies.

2
Remote Control User’s Guide
www.gateway.com
Remote control buttons
Button Function
SETUP. Starts all programming sequences.
Remote LED. Blinks when the remote is being
programmed or is sending a signal to your
plasma TV.
POWER. Turns the selected component on and
off.
Programs the remote control to recognize a
component. For programming instructions, see
“Programming the remote control” on page 7.
TV. Selects a programmed TV.
DVD. Selects a programmed DVD player.
VCR. Selects a programmed VCR.
CBL. Selects a programmed cable TV set-top
box.
SAT. Selects a programmed satellite TV set-top
box.
AMP. Selects a programmed amplifier.
CD. Selects a programmed CD player.
AUX. Selects a programmed component.

3
Remote control buttons
www.gateway.com
Number button pad. Selects a channel or
enters a password.
MUTE. Turns the sound on and off.
100. Enters channel numbers greater than 100.
VOL. Turns volume up or down.
INPUT. Changes the input source.
LAST. Recalls the previously viewed channel.
WIDE. Cycles through standard and widescreen
viewing modes.
CH. Changes the channel.
Button Function

4
Remote Control User’s Guide
www.gateway.com
GUIDE. Does not work in TV mode. Accesses
programming guides, such as the one that
comes with a satellite dish.
INFO. Shows the current status of your
plasma TV, such as the video input source,
audio status, and channel number.
, , , . Navigates the on-screen display
(OSD) menus.
OK. Works as the Enter button.
MENU. Enters the OSD menus.
EXIT. Exits the component, guide, or OSD
menus.
Reverse. Rewinds the CD, DVD, or VCR when
the component is activated.
Play. Plays the CD, DVD, or VCR when the
component is activated.
Forward. Forwards the CD, DVD, or VCR when
the component is activated.
Record. Records the CD, DVD, or VCR when
the component is activated.
Stop. Stops the CD, DVD, or VCR when the
component is activated.
Pause. Pauses the CD, DVD, or VCR when the
component is activated.
Button Function

5
Remote control buttons
www.gateway.com
FREEZE. Freezes the display image.
– (ZOOM). Reduces the display image.
+ (ZOOM). Enlarges the zoom area.
PIP. Turns PIP (picture-in-picture) mode on and
off.
SLEEP. Turns on the sleep timer.
CC. Turns Closed Caption mode on and off.
RGB. Selects the component connected to the
RGB In connector as the input source.
DVI. Selects the component connected to the
DVI In connector as the input source.
TV. Selects TV as the input source.
VIDEO (AV1). Selects the component
connected to AV1 (Video) as the input source.
S-VIDEO (AV1). Selects the component
connected to AV1 (S-Video) as the input source.
AV2. Selects the component connected to AV2
as the input source.
Button Function

6
Remote Control User’s Guide
www.gateway.com
Inserting batteries
To install batteries:
■Insert two AA batteries into the remote control. Make sure that you match
the +and –on the batteries with the +and –symbols inside the battery
compartment.