Gator Frameworks GFW-UTL-CART52AT User manual

GATOR PROMISE:
Gator Frameworks is dedicated to producing the highest quality products and accessories.
We back up that commitment with a 3 year Warranty on any manufacturing defects in
material and workmanship. This warranty applies to the original owner and requires proof of
purchase. Our warranty entitles the original owner repair or replacement of the product, or
replacement with a comparable product of similar value and condition at our discretion.
This warranty is limited to Gator Frameworks products only and excludes loss of personal
property, loss of use, accidental damage, misuse, or normal wear and tear.
BEST PRACTICES:
• Always use caution when moving a load on utility cart.
• When using cart be careful not to pinch fingers.
• Never overload the cart, this may cause cart failure and will void warrenty. (Max 500lbs)
• Always lock casters when loading equipment on uneven surface, and when parked.
(Use wheel blocks if load is heavy)
• When possible use bungee straps to keep gear axed to cart platform.
• Always use caution if using in extended position, have a helper navigate when possible.
500LB
MAX CAPACITY
5112 W. Linebaugh Ave. • Tampa, FL • Phone: [phone] • Fax [phone]
Visit GatorCases.com for more service & product information • All rights reserved Gator Co.
08.26.2020 - REV:A
ALLTERRAIN UTILITY CART 52
GFWUTLCART52AT
RECOMMENDED TOOLS WHEEL ATTACHMENT
Adjustable
Crecent Wrench
Channel Lock
Pliers
Needle Nose
Pliers
ASSEMBLY INSTRUCTIONS
SCAN FOR MORE
INFORMATION

Gently slide small washer, then large washer onto
rear axle. Then slide wheel onto the axle.
1. Rear Wheel Installation 2. 3.
4. Front Swivel Caster 5. 6.
Next, place another large washer on wheel outside. Finish with inserting cotter pin into hole and bending
ends backward at 90 degrees with pliers.
Slide top of swivel caster upwards into the front axle
hole.
Next, place small washer then lock washer onto
threads of swivel caster.
Finish by tightening nut onto caster using wrench and
channel lock pliers. Tighten firmly until lock washer no
longer rotates.
08.26.2020 - REV:AASSEMBLY INSTRUCTIONS 08.26.2020 - REV:A
PAGE 2 OF 4
ASSEMBLY INSTRUCTIONS
GFWUTLCART52AT
Periodically check cotter pin on rear wheel and tighten nut to insure swivel caster is securely connected to axle.
CAUTION

(A) To extend loading frame of cart, tilt cart upwards.
(B) Loosen the crescent knobs counter-clockwise, press in the extension stop button.
(C) Pull upward on the frame until the stop button engages into the hole.
(D) Retighten the crescent knobs clockwise.
(A)
(C)
(B)
7. Cart Extension
(A) Firmly step downward onto the bar marked “Step Down”
(B) Grab handle end and pull upwards until the handle locks into position
(C) To fold, “Step Down” on bar and push handle downwards into lock position
(A)
(B)
(C)
8. To Fold Handles
08.26.2020 - REV:A
PAGE 3 OF 4
ASSEMBLY INSTRUCTIONS
GFWUTLCART52AT
(C)
(D)

• Utility cart transforms into 8dierent configuration options
• Never overload the cart, this may cause cart failure and will void warranty. (Max 500lbs)
• Always lock casters when loading equipment on uneven surface, and when parked.
(Use wheel blocks if load is heavy)
• When possible use bungee straps to keep gear axed to cart platform
Extendable Length: Min - Max
Wheel Size: Front & Rear
Material:
Finish:
Weight:
Compact Overall:
Weight Capacity:
Black Powder-Coated
30.15 - 52in (766 - 1321mm)
8in (203mm) & 10.25in (260mm)
34.5 x 19.25 x 13.5in (876 x 489 x 343mm)
38lbs (17.2kg)
500lbs (225kg)
Tubular Steel with Plastic Wheels & Polyurethane Foam Tires
SPECIFICATIONS
#5 EXTENDED
DUAL-HANDLE
#1 COMPACT
DUAL-HANDLE
#6 EXTENDED
SINGLE-HANDLE
#7 EXTENDED
COLLAPSED
#8
EXTENDED
UPRIGHT
#4
COMPACT
UPRIGHT
#2 COMPACT
SINGLE-HANDLE
#3 COMPACT
COLLAPSED
08.26.2020 - REV:A
PAGE 4 OF 4
ASSEMBLY INSTRUCTIONS
GFWUTLCART52AT
(Fold swivel side handle first)