MID WEST PRODUCTS LC-R08E User manual

©2019 Mid West Products, Inc. -1- Form No. M8-1728
LOG CART –MODEL LC-R08e
Owner’s Manual and Parts List
SAVE THIS MANUAL
You will need this manual for the safety instructions, assembly instructions and parts list. Put it in a
safe, dry place for future reference.
Additional Information/Link to PDF Copy of this Manual:
WARNING
•Read instructions and Warnings before set up and use.
•Check to insure product is not damaged prior to use. If product is damaged, do not use.
•Do not exceed cart’s weight capacity of 200 lb.
•Do not exceed each tire’s maximum permissible inflation pressure of 30 psi.
•Only use product as intended. Do not attempt to jump or stand on product.
•Not for use by unsupervised children.

©2019 Mid West Products, Inc. -2- Form No. M8-1728
•Please read and understand these
Instructions before assembling your Log Cart.
•Check that you have all components.
•1/2” and 9/16” Wrenches required for
assembly.
Assembly Instructions:
Step 1: Attach Top Handle/Front Support (#1)
by inserting into the Side Frames (#3)
and securing using two each Bolts (#6),
Flat Washer (#11), Lock Washer (#10),
and Nut (#7). Insert Wheel Axle (#5)
between the two Side Frames (#3). Do
not completely tighten Bolts and Nuts
until told to do so.
Step 2: Attach Handle/Front Support (#1) by
inserting into opposite end of Side
Frames (#3) and securing using two
Key
Part No.
Description
Image
Qty
1
52-0001
Handle/Front
Support
2
3
52-0003
Sides
2
4
52-0004
Wheel & Tire
2
5
52-0005
Axle
1
6
52-0006
Bolt
4
7
52-0007
Nut
4
8
52-0008
Cotter Pin
4
9
52-0009
Big Washer
4
10
52-0010
Lock Washer
4
11
52-0011
Flat Washer
4
each Bolts (#6), Flat Washer (#11),
Lock Washer (#10), and Nut (#7).
Step 3: Insert Axle (#5) through one of the Sides
(#3), then slide on two BigWashers (#8)
before sliding the Axle (#5) through the
other Side (#3). Center Axle (#5), Slide
Big Washers (#8) [one to each side] out
against the Sides (#3). Secure Axle
(#5) with a Cotter Pin (#9) in the hole
just inside the Big Washers (#8).
tightness.
Step 4: Attach one Wheel (#4) on each side of
the Axle (#5) and secure with Washers
(#9) and Cotter Pin (#8).
Step 5: Now Tighten all parts that are using
Bolts (#6) and Nuts (#7) as shown in the
Diagram. Assembly is now complete!
Log Cart –Model LC-R08e

©2019 Mid West Products, Inc. -3- Form No. M8-1728
INSTRUCTIONS FOR ORDERING PARTS
(Minimum Parts Order Charge $20.00)
1. Address all parts orders or correspondence regarding customer service to one of the following:
Parts Dept.
Phone:
[phone]
Mid West Products, Inc.
P.O. Box 301
E-mail:
[email protected]
Phillipsburg, OH 45354
Website:
www.Mid-West-Products-Inc.com
2. Write your name and address plainly (print or type).
3. Explain where and how to ship.
4. Give model number of unit.
5. Give part number from parts list, as well as a description, including color, of the part and the quantity
you need.
6. Inspect all shipments you receive. If any parts are damaged or missing, file a claim with the carrier
before accepting.
7. If you are returning parts, be sure to include WITH THE SHIPMENT a list of the parts with your
name and address.
8. All orders for repair and replacement parts will be shipped when paid with Master Card, Visa, or
personal check/money order. Prices subject to change without notice.
GUARANTEE
The merchandise you have purchased from us has been carefully engineered and manufactured under
Mid West Products rigid quality standards and should give you satisfactory, dependable operation.
However, like all mechanical merchandise, it may occasionally require adjustment or maintenance.
Should you need technical assistance, please contact MID WEST PRODUCTS.

©2019 Mid West Products, Inc. -4- Form No. M8-1728
OTHER LAWN & GARDEN TOOLS FROM
MID WEST PRODUCTS, INC.
WOODEN UTILITY CARTS —GC-20 OR GC-26
It has a gate that lifts out to unload bulky loads like mulch, soil, gravel, firewood or waste
and also allow it to carry longer items. Once you have one, you’ll wonder what you ever
did without it!
The Standard-Duty Utility Cart has two 20” Pneumatic Wheels and a cargo capacity of 6.5
cubic feet or up to 300 pounds.
The Heavy-Duty Utility Cart has two 26” Pneumatic Wheels and a cargo capacity of 11.3
cubic feet or up to 400 pounds.
VEGETABLE GARDEN ROW SEED PLANTER —GSF-31M
➢ALL-IN-ONE item that can simultaneously Plant and Fertilize Seeds as well as Mark
Rows.
➢It only weighs 14 lbs. and NO TOOLS are REQUIRED for Assembly.
➢Attached Pouch for extra seed, notes, gloves, and other needed items.
➢High Strength Powder Coated Steel Frame and Seed Tube.
➢The unit is Rear-Wheel Belt Driven for Positive, Even Seeding and No Messy Chain to
pull the seeds out of the ground.
➢Includes 6 Different Seed Plates for 31 Common Variations in Seed Sizes.
HIGH WHEEL CULTIVATOR —HWC-243A
•24” Steel Wheel For Easy Handling
•Special Selection of 3 Tools (Mol-board Plow, Reversible Shovel, Welded Five-Tine
Cultivator)
•Slotted Foot For Plow Attachments Enables Easy Adjustment of Cutting Depth and
Angle
•Handle Folds Easily For Storage or Transportation
31” DELUXE PUSH LAWN SWEEPER —B-319
•The “Butterfly” Handles Increase the Hamper Capacity to a Huge 8.5-Bushel.
•Big 10” Precision Molded Plastic Wheels with Ribbed Tread Rubber Tire…Makes this
Unit Easy to Push.
•The Rear Swivel Casters Help Make this Easy to Maneuver.
•Our Easy to Operate One-Hand “Squeeze Me” Height Adjustment Makes it Easy to go
From Grass to Pavement.
•The Removable Hamper Allows for Easy Dumping and Fold Away Storage.