GDIC GBX2006WP Series User manual

GBX2006WP series
Fixed Navigation Box
Ver. 6.8
GBX2600

GBX-2006 Fixed Navigation Box
2
1-1. Introduction: .............................. 2
2-1. Setting the device ....................... 3
2-2-1. Setting RGB....................................................3
2-2-2. Setting SYSTEM-1.........................................4
2-2-3. Setting SYSTEM-2.........................................6
2-2-4. Setting POI Camera: .....................................7
2-2-5. Setting PANEL:..............................................8
2-2-6. Save Setting: ...................................................9
2-2-7. About Version:..............................................10

1-1. Introduction:
There are 3 main Icons in WP9100R when you enter the system in the beginning.
(Note: the default setting would enter the navigation map directly; please select
“EXIT” to leave it.
A. Media Play
B. Navi 1
C. Setup
You can choose one of icon to use the function you need in the main menu.

GBX-2006 Fixed Navigation Box
4
2-1. Setting the device
Please click the “Setup” icon.
2-2-1. Setting RGB
You can adjust your screen appearance from RGB page.

GBX-2006 Fixed Navigation Box
5
HB—horizontal balance
HS—horizontal size
VB— vertical balance
**Warming: Please don’t adjust the value of display without instruction.
2-2-2. Setting SYSTEM-1
You can select different functionality from “System” page which included “AutoRun
Navi”, “ASK”, “POI Detect”, “Calibration” and “Time Zones”.
“AutoRun Navi” means it will enter the navigation system directly and automatically,
if you want to enter the media play and setup system, you need to exit the navigation system
first. If you don’t want to enter the navigation system directly, please select
“OFF” button.
Note: the default setting is selecting the “ON” button.

GBX-2006 Fixed Navigation Box
6
“ASK” means if you buy our WP-Radar02 (RF receiver) and WP-Radar01 (Radar
transmitter with AAC detector), you can select the “ON” button to enable the RF radar
detector function, and we also build a speed detection from 0Km~ 100Km to
anti-interference for the microwave alarm. You also can find your ASK Version in the
following blank.
Note: the default setting is selecting the “OFF” button.
“POI Detect” means if you buy our POI Detector, you can select the “ON” button to enable
the POI detector function. You also can find your POI Detect Version in the following blank.
Note: the default setting is selecting the “OFF” button.
“Calibration” can help you to calibrate your accuracy when you touch the panel.
Please touch every cross to calibrate the touch accuracy. After you finish it, please
press “EXIT”; if you fail in any cross calibration, please press “Re-Calibration”, and repeat
the same steps again.

GBX-2006 Fixed Navigation Box
7
In “Time Zones” system, you can set up your Current Time and Time Zone.
2-2-3. Setting SYSTEM-2
You can choose to hide the cursor or not.
If you press to “ON”, you need to select the auto hiding time again.
For example: You choose “ON” and “7 sec”, it means if you don’t operate anything, after 7
seconds, the cursor will be auto hide directly.

GBX-2006 Fixed Navigation Box
8
Note: the default setting is selecting the “OFF” button.
2-2-4. Setting POI Camera:
You can select verify POI reminding under “POI Camera” page.

GBX-2006 Fixed Navigation Box
9
2-2-5. Setting PANEL:
You can select a model of PANEL you use from “PANEL-1” and “PANEL-2” pages.

GBX-2006 Fixed Navigation Box
10
2-2-6. Save Setting:
After you complete all of your setting, please save them until “Save successful!”
message appearance.
Note: If you try to change the panel setting, you’ll be asked to re-start the navi-
box.
It will appear the message as follow, “Save successful, Please restart!”

GBX-2006 Fixed Navigation Box
11
2-2-7. About Version:
You also can check the FW and OS version from “About” page.