GE DDE8000M User manual

Dryer
Contents
Appliance Registration
2
Automatic Drying
5
Care and Cleaning
13
Consumer Services
15
Controls Setting Guide
6, 7
Dryer Exhaust
13
End-of-Cycle Signal
5
Energy-Saving Tips
g
Knits Drying Tips
5, 11
Lint Filter
9, 13
Loading 5,9
Model and Serial Numbers
2
Operating Instructions
5
Perm. Press Drying Tips
5, 11, 12
Problem Solver
10-12
Safety Instructions 3,4
Sorting 5,8
Storing Dryer
13
Timed Drying
5
User Maintenance Instructions 13
Warranty Back Cover
GEAnswer Center
m
80&626.2000
Models DDE8000M
DDG8080M
GEApp&ances

Help m help you...
If You Need Service
Before using your dryer,
read this book carefully.
It is intended to help you operate and
maintain your new dryer properly.
Keep it handy for answers to your
questions.
If you don’t understand something
or need more help, write (include
your phone number):
Consumer Affairs
GE Appliances
Appliance Park
Louisville, KY40225
If you rweived a
damaged dryer...
Immediately contact the dealer
(or builder) that sold you the
dryer.
Save time and money.
Before you request service...
check the Problem Solver on
pages 10-12. It lists causes of
minor operating problems that
you can correct yourself.
Write down the model
and serial numbers.
You’ll find them on a label on the
front of the dryer behind the door.
These numbers are also on the
Consumer Product Ownership
Registration Card that came with
your dryer. Before sending in this
card, please write these numbers
here:
Model Number
Serial Number
Use these numbers in any
correspondence or service calls
concerning your dryer.
To obtain a Spanish language
version of this book, call
GE Answer Center@
800.626.2000
consumer information service.
Para obtener la version en
espafiol de este manual,
name a
GE Answer Center?
servicio de information
para el consumidor,
te16fono 800.626.2000.
FOR YOUR SAFETY
If you smell gas:
1. Open windows.
2. Don’t touch
electrical switches:
3. Extinguish any
open flame.
4. Immediately call
your gas supplier.
*Don’t turn electric switches
on or off because sparks may
ignite the gas.
I
FOR YOUR SAFETY
Do not store or use
gasoline or other
flammable vapors and
liquids in the vicinity
of this or any other
appliance.
To obtain service, see the
Consumer Services page in the
back of this book.
We’re proud of our service and
want you to be pleased. If for some
reason you are not happy with the
service you receive, here are three
steps to follow for further help.
FIRST, contact the people who
serviced your appliance. Explain
why you are not pleased. In most
cases, this will solve the problem.
NEXT, if you are still not pleased,
write all the details—including
your phone number—to:
Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, Kentucky 40225
FINALLY, if your problem is still
not resolved, write:
Major Appliance
Consumer Action Panel
20 North Wacker Drive
Chicago, Illinois 60606
All drying instruction terms in this book conform to the Care Labeling
Rule established by the Federal Trade Commission, January 1984.
2

~PO~~T SMETY INSTRUCTIONS
- Readallinstructions before usi~thkappliance.
-
~PORTANT
SMETY NOTICE
The California Safe Drinking
Water and Toxic Enforcement Act
requires the Governor of California
to publish a list of substances
known to the state to cause cancer,
birth defects or other reproductive
harm and requires businesses to
warn customers of potential
exposure to such substances.
Gas appliances can cause minor
exposure to four of these substances,
namely benzene, carbon monoxide,
formaldehyde and soot, caused
primarily by the incomplete
combustion of natural gas or
LP
fuels. Properly adjusted dryers will
minimize incomplete combustion.
Exposure to these substances can
be minimized further by properly
venting the dryers to the outdoors.
– WARNING-TO reduce the risk
of fire, electric shock, or injury
to persons when using your
apptiance, fo~ow basic precautions,
including the following:
● Use this appliance only for its
intended purpose
as described in
this Use and Care Book.
● This dryer must be properly
installed and located in
accordance with the Instillation
Instructions before it is used.
If
you did not receive an Installation
Instructions sheet with your dryer,
you can obtain one by contacting
the service location nearest you.
—Properly ground to conform
with all governing codes and
ordinances. F O 11 OW details in
Installation Instructions.
—Locate where the temperature
is above 50°F. (lO°C.) for
satisfactory operation of the
dryer control system. Do not
install or store the dryer where it
- will be exposed to the weather.
—Connect to a properly rated,
protected and sized power-supply
circuit to avoid electrical overload.
—Exhausting to the outside is
STRONGLY RECOMMENDED
to prevent large amounts of
moisture and lint from being blown
into the room. Carefully follow the
Exhausting Details in the
kstilation
Instructions.
● When disconnecting this
appliance pull by the plug rather
than the cord to avoid damage to
the cord or junction of cord and
plug. Make sure that the cord is
located so that it will not be stepped
on, tripped over or otherwise
subjected to damage or stress.
● Do not repair or replace any
part of the appliance or attempt
any servicing unless specifically
recommended in this Use and
Care Book or in published user-
repair instructions that you
understand and have the skilis to
carry out.
To minimize the possibility
of a fire h~rd.
● Do not use heat to dry articles
containing rubber, plastic, or
similar materials (such as padded
bras, tennis shoes, galoshes, bath
mats, rugs, bibs, baby pants, phtic
bags, etc.) as these materials may
melt or burn. Also, some rubber
materials, when hated, can under
certain circumstances produce
fire by spontaneous combustion.
● Garments labeled “Dry Away
From Heat” (such as life jackets
containing Kapok) must not be put
in your dryer.
● Do not wash or dry articles
that have been cleaned in, washed
in, soaked in, or spotted with
combustible or explosive substances
(such as wax, paint, gasoline,
degreasers, dry-cleaning
solvenfi, kerosene, etc.) which
may ignite or explode. Do not use
or store such substances on/or
around your washer andlor dryer
during operation.
3
● Any article on which you have
used a cleaning solvent, or which
contains flammable materials (such
as cleaning cloths, mops,
towels used in beauty salons,
restaurants or barber shops, etc.)
must not be placed in or near the
dryer until all traces of these
flammable liquids or solids and
their fumes have been removed.
There are many highly flammable
items used in homes such as:
acetone, denatured alcohol,
gasoline, kerosene, some
household cleaners, some spot
removers, turpentines, waxes, wax
removers and products containing
petroleum distillates.
G Clean the lint fiiter before each
load to prevent lint accumulation
inside the dryer or in the room.
DO N~ OPERATE THE
DRYER WITHOUT THE
L~T
FILTER IN PLACE.
● Keep area around and
underneath your appliance free
from the accumulation of
combustible
materiak, such as
lint, paper, rags,
chemicak, etc.
● Do not store items that may burn
or melt (such as clothing,
paper
material, plastics or plastic
containers, etc.) on top of the dryer
during operation.
c The interior of the machine
and the exhaust duct connection
inside the dryer should be
cleaned periodically by a
qualified individual.
● Exhaust duct (see instigation
instructions). Use only metal
duct inside dryer or for
exhausting dryer to the outiide.

Safety Imtructiom (continu~) Important
To minimbe the possibility
of iq”ury.
● Never reach into the dryer while
the drum is
motig. Before loading,
unloading or adding clothes, wait
until the drum has completely
stopped.
● Close supervision is necessary
if this appliance is used by or near
children. Do not allow children
to play inside, on or with this
appliance or any discarded
appliance. Dispose of discarded
appbces and shipping or packing
materials properly. Before
discarding a dryer, or removing
from service, remove the door
of the drying compartment.
● Keep all laundry aids (such
as detergents, bleaches, fabric
softeners, etc.) out of the reach of
children, preferably in a locked
cabinet. Observe all warnings on
container labels to avoid personal
injury.
● Keep the floor around your
appliances clean and dry to reduce
the possibility of slipping.
● Do not dry fiberglass articles in
your dryer. Skin irritation could
result from the remaining glass
particles that may be picked up
by clothing during subsequent
dryer uses.
. The laundry process can reduce
the flame retardancy of fabrics. To
avoid such a result, the garment
manufacturer’s care instructions
should be followed very carefully.
● Never climb on or stand on the
dryer top or door.
Q Do not tamper with controls.
● To minimize the possibility
of electric shock, unplug this
appliance from the power supply
before attempting any maintenance
or cleaning (except the removal and
cleaning of the lint filter).
N~E:
Turning the Cycle Selector knob
to an OFF position does
N~
disconnect the appliance from
the power supply.
● Do not operate this appliance
if it is damaged, malfunctioning,
partially disassembled, or has
missing or broken parts, including
a damaged cord or plug.
● If yours is a gas dryer, it is
equipped with an automatic electric
ignition and does not have a pilot
light. DO NOT ATTEM~ ~
LIGHT WITH A MA~H. Burns
may result from having your hand
in the vicinity of the burner when
the automatic ignition may turn on.
Dryer-applied fabric
softiners or anti-static
conditioners
You may wish to soften your
laundered fabrics or reduce the
static electricity in them. We
recommend you use either a
fabric softener in the wash ~cle,
according to the manufacturer’s
instructions for those products, or
try a dryer-added product for
which the manufacturer gives
written assurance on the packge
that their product can be safely
used in your dryer.
Service or performance problems
caused by the use of these products
are the responsibility of the
manufacturers of those products
and are not covered under the
warranty of this appliance.
SAW T~SE
~STRUCTIONS
-
4

How to opemte your dryer
WmING—TO reduce the risk of fire, eleetric shock, or injury to persons,
—
read the IMPORTANT SAFETY INSTRUCTIONS before operating the appliance.
Five Cvcie
Automatic Dqer
had Your Dryer Properly
~ Fabric Care Selections
Push a button to select the proper heat for your load.
● Clean the lint filter each time the
dryer is used. Always be sure the
lint filter is in place. Don’t use the
dryer without it.
c Good sorting for the dryer begins
at the washer. Generally, if clothes
are sorted right for washing, they’re
sorted right for drying. See page 8
for sorting help. (If you do mix
various types of fabrics in your
load, set the controls for the
lighter-weight fabrics and remove
Should be used with cycles indicated ●
Automatic,
Fabric Care Automatic
Perm Press and
Selections
Regular Cycle
Knits Cycle
Cottons
High Heat
●
Perm Press
Medium Heat ●
Delicate#Knits
Low Heat
●
Fluff
No Heat
Timed
Cycle
●
●
●
●
w;en dry. Reset controls for the @ Turn Cycle Selector to desired
remaining heavier fabrics. ) cycle setting. The selector may be
@ Press PUSH ~STARTbutton
turned in either direction.
to start dryer. (Opening the door
Set the Controk
during operation stops the dryer.
Tore-start, close the door and
See the Controls Setting Guide
press the START button.)
on pages 6 and 7.
,’
,9 ;
, ,’
End-of-Cycle Signal
c PLACE ON HANGERS— fabric, load
six, and Cycle Selector
(O~wates automatically with all Permanent Press and Polyester
setting). The Cycle Selector
Knit garments look best if placed
cycles. }
advances (when the heat is of~ until
on hangers after drying.
The
signal’will sound just before it automatically turns off dryer.
the
endof the ~le to remind you
What is the difference
Timed Drying
to remove the clothe~ To stop
When using the TIMED ~CLE,
sigtil while sounding, ad~ance
between Automatic &
you select the number of minutes
Cycle Selector to OFF.
~med drying?
you wish the dryer to run and it
turns off at the end of this time
Polyester Knits &
Permanent Press
drying tips
● DO N~ OVERLOAD-Garments
being dried or dewrinkled should
tumble freely.
● REMOVE CLOTHES PROM~LY
—To help prevent wrirdding, remove
from the dryer promptly at the end
of the drying cycles.
Automatic Drying
When using the AU~MATIC
period.
cycles, the Automatic Dry Control
system
continually senses the
temperature of the air in the dryer
drum. Wet laundry keeps this air
cool. When laundry is dry enough
TURN THE
(and the drum air warm enough)
for Controls Set
the heat turns off. When the air
cools, the heat turns back on. This
off and on cycling may happen a
number of times (depending on the
5

Controk Setting Guide for different fabrics and loads
Fabric Care/
Drying Selection*
bad
Cycle
Cycle Setting
Set at LIGHT, MEDIUM or HEAVY
FABRICS
depending on load**
Cottons &
Linens Cottons
High Heat Automatic Regular Cycle
or
Timed Cycle Set at 45 minutes for dry; at
10 minutes for ironing.
Permanent Press, Treated Cottons,
Blends with Cotton
Perm Press
Medium Heat Automatic Perm Press and Knits Cycle
Timed Cycle
Set at MEDIU,M.
Set at 10 minutes to de-wrinkle
garments that
have not been washed
Synthetics—Polyester, Nylon,
Acrylic Knits and Woven Fabrics
Sturdy
Automatic Perm Press
and Knits Cycle
Perm Press
Medium Heat
Delicates/Knits
Low Heat
Set toward MORE DRY.
Delicate Set at LIGHT FABRICS
Automatic Perm Press
and Knits Cycle Set
:it LIGHT FABRICS.
Silks and Wools, Blends including
Silks and Wools
I
Delicates/Knits
Low Heat
Rayon and Acetate
Delicatcs/Knits
Low Heat
Down-filled garments, if machine
Cottons
washing and drying are High Heat
recommended.
Baby Clothes—Sturdy: Diapers, Cottons
Nightgowns, Shirts, Pads, Sheets, High Heat
Receiving Blankets, Coveralls. See
Special Instructions.
Baby Clothes—Delicate Delicatcs/Knits
Low Heat
Automatic Pcrm Press
and Knits Cycle Set at LIGHT FABRICS.
Automatic Regular Cycle
Set at MEDIUM
Automatic Regular Cycic
Set at HEAVY FABRICS or
MEDIUM.
Automatic Pcrm Press
and Knits Cycle Set at LIGHT FABRICS
Blankets—Wool, Part Wool,
Cotton, Electric, Synthetic. See
below under “Extra-large
Items:’
Cottons
High Heat Timed Cycle Set at
20 to 25 minutes,
Curtains, Slipcovers, Draperies.
DO N~ MACHINE DRY
FIBERGLASS.
Cottons
High Heat Timed Cycle
For Iirst setting. set at 20 minutes;
for second setting, set at 15 minutes
Chenille Bedspreads, Robes. See
below under “Extra-large
Items:’
Rubber-coated Items, Laminated
Fabrics, Vinyl, Plastics and
Articles with Plastic Trim.
Cottons
High Heat
Fluff
No Heat
Timed Cycle First setting— 20 minutes:
additi(mal settings—5 minutes,
Timed Cycle
Set Ior time desired
Timed Cycle First setting—20 minutes;
additional settings—5 minutes.
Bathmats and Rugs
I
Cottons
High Heat
Extra-large Items—Queen or King
Size Sheets, Blankets or Spreads,
Sleeping Bags, Insulated Jackets or
Suits, Mattress Covers (Pads),
Quilted Bedspreads.
Permanent Press
Medium Heat Timed Cycle
First sct[ing—20 minutes:
secund setting—15 minutes:
additional settings—5 minutes
Timed Cycle Set
at 70 minutes.Pillows—Feather and Polyester-
filled (if manufacturer recommends
they be dried in a dryer). See
Special Instructions.
Cottons
High Heat
*The terms High, Medium and Low Heat are those usually found on fabric care labels. For best results, f(~llow your fabric care Iabcls.
**Light: For lightweight fabric loads; Medium: for most normal loads; Heavy Fabrics: for Inads that include heavyweight fabrics and for
very small loads.
N~E: The Cycle Selector settings indicated above are to be used as a guide. You may find that best results arc (~btaincd for certain of your
fabrics by setting the Cycle Selector to either side of the recommended settings.
6

SWcial Instructions
Do not dry non-colorfast items with whites or light-colored items.
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops; place clothes on hangers to
minimize wrinkling.
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops, place clothes on hangers to
minimize wrinkling.
Dry silks and wools in your dryer only if recommended by the garment manufacturer. Follow instructions carefully.
Tumble drying is mandatory. Down must be thoroughly dried to remove odor and prevent mildewing. Place two large, dry towels in the
dryer to improve tumbling and shorten drying time. Be sure to dry thoroughly.
IMPORTANT. If children’s sleepwear is made of Modacrylic, tumble dry only on Low/Knits. Normal Heat can damage these fabrics.
Check manufacturer’s drying instructions.
See above instructions.
Place in dryer with 3 or 4 dry towels which have been heated for 5 minutes. Set timer for 20 to 25 minutes. Do not set control for more than
25 minutes. Do only one blanket at a time. Remove blanket at end of cycle and block blanket back to original shape. Press binding with warm
iron. Allow to dry before storing.
Use dry towels as buffers. Set timer for 20 minutes. If items are still wet, reset for 15 minutes and check again. Items should be removed while
still damp. Place slipcovers on furniture immediately. Hang draperies and curtains so that creases will fall out. Stop dryer periodically and check
filter for excess lint. Remove and restart dryer.
Tumble on FLUFF (No Heat) setting as heat may cause alteration in shape, color and appearance of such articles.
Stop dryer periodically and check filter for excess lint. Remove and restart dryer.
Special precautions must be taken for extra-large items. Set dryer for 20 minutes
fhen check carefifly. Set 15 minutes for second setting, check
again; and 5 minutes for each additional setting. Make sure that article does not
fill drum. Many large articles, when wet, have ample room in
dryer, but as they dry and fluff up may not have room to tumble. Check carefully every few minutes and if article is
still wet or damp and fills
dryer, finish drying on line. Do not, under any circumstances operate dryer for longer times without checking. CAUTION: If iarge items do not
have room to tumble, the air flow may be blocked which could result in scorching your valuable items. Many large items, like shag rugs, cannot
be dried in home size dryers. DO
N~tumbfe dry jackets containing hpok. (See filter cleaning instructions above. )
Check ticking for
holes or weak seams where feathers or filling could escape. Dry no more than one pillow at a time and set dryer for maximum
time. Stop dryer occasionally and shake pillows to redistribute filling for more even drying. Check pillows at end of
d~ing time. If they are not
completely dry, return them to dryer and reset for more drying time. Feather pillows dry very
slowly and must be dried completely to prevent
nildewing. DO N~tumble dry pillows containing hpok.
—
Refer to Garment Manufacturers’ Care bbels
For more information on care labeling, send for “What’s New About CARE LABELS?’
For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.
7

How to sort the clothes
Normally, if you have sorted clothes correctly for washing,
you will also have properly sorted drying loads.
Sort by surface te~ure
from
LINT PRODUCERS—such as
terry toweling and chenille—give
up lint. LINT COLLE~RS—
such as man-made fibers and
napped fabrics like velveteen and
corduroy—attract lint, and must be
dried separately.
Sort by fabric
Separate
m
L ~.
.,
.) Cottons& /
\
‘,, Linens
)
,
from
from
from
In addition to sorting to reduce lint
collection, it is recommended that
fabrics of similar construction be
dried together whenever possible.
Sort by color
Sort by wei@t
Separate
m
. .
, Heavy Items
\
‘ (such as
towels) ,
from
m
.
+ Light Items
i
(such as
curtains)
For information on tumble drying
extra-large items and different
fabrics and loads, see pages 6 and
7.
8

How to load the
clothes
Don’t overload your dryer.
Crowded loads don’t dry efficiently
and clothes may be unnecessarily
wrin~ed.
Loads should look like this:
Drum with
Permanent Press Load
Drum with
Cottons & Linens
Clean the lint filter before
dryiW every load.
Clean lint filter (see shaded area)
by putting your moistened fingers
at the corner of filter and wiping in
a downward motion all the way
across to the other corner.
For additional information on lint
filter, see page 13.
Ene~y-Savi~~ps
● Sort clothes by weight so you won’t
. To help prevent ironing, use
● Clean dryer lint filter each time
have to run an extra cycle for one or
Perm. Press, Medium Heat or
YOU dry.
two heavier, slower-drying items. Delicates/Knits
Low Heat. Remove
See page 8.
garments promptly at end of drying
● CIW dryer exhaust ducting at lat
● Do not overload dryer. For
cycle and place on hangers. once a year. A partially clogged
exhaust can lengthen drying time.
efficient drying, clothes need to
● Dry your clothes in consecutive
tumble freely.
loads. Using a “warm” dryer will
● Use Automatic Drying Cycles
save energy.
whenever possible to help prevent
overdying and to save energy.
9

-
m
Questiom?
~ UseThis Roblem Solver
~
PROBLEM POSSIBLE CAUSE AND REMEDY
DRYER WON’T ● Dryer unplu~ed. Make sure power cord is plugged in.
STAW
● No power to dryer. Check fuses and circuit breakers to make sure dryer is getting
current. Most electric dryers use two.
● Controls improperly set. Make sure controls are set and START switch is pushed.
Opening the door during operation stops the dryer. Tore-start, close the door and push
the START switch.
● Dryer door is open. Close door securely—dryer will not run with door open.
● Circuit is overloaded. Do not operate other appliances on the same electrical outlet
or circuit while the dryer is operating.
CL~HES TAKE ● Controls improperly set. Check all controls to make sure they are correctly set for
~0 LONG ~ DRY
the load you want to dry. Seepages 5-7.
c Clo~d lint filter. Remove and clean filter before every load. Periodically clean area
under lint filter with vacuum cleaner. See page 13.
● Improper ducting. Make sure dryer is ducted in accordance with Installation
kstructions.
Q Obstruction in exhaust ducting. Make sure ducting is clean and free of obstruction;
make sure damper in outside wall cap operates easily. If flexible ducting is used, be
sure it is not kinked and is properly installed
aGcording to Installation Instructions.
. Blown fuses or tripped circuit breakers. Check household fuses or circuit breakers.
Most electric dryers use two. It is possible for one to be blown or tripped and the dryer
still tumble without heat.
c Improper sorting. Do not mix heavy, hard-to-dry items with lightweight articles.
● Large loads of moisture-holding fabrics, such as beach towels, take a long time to
remove moisture.
● Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
● Too few items in dryer. If drying only one article, add two more similar articles, even
if dry, to insure proper tumbling.
SH~NKAGE,
s Some fabrics will shrink whether machine washed and tumble dried or washed by hand
GENERAL
and drip dried; others may be safely washed but will shrink in a dryer. Follow Garment
Manufacturers’ Care Labels exactly. If in doubt, do not machine wash or tumble dry.
10

PROBLEM
SHUNKAGE,
KNITS
WNNKLINGIN
PERMANENT PRESS
AND “NO-IRON”
ITEMS
POSSIBLE CAUSE AND REMEDY
● Relaxation shrinkage can occur in knit fabrics that have been improperly stretchd
and elongated by the manufacturer. When this occurs, garment maybe pressed back into
shape after each wash and dry cycle.
● Progressive or delayed shrinkage is caused when starch or sizing (in some fabrics) is
gradudly removed by laundering. Maybe noticed in older garments that have been
laundered many times without pmious
-e. T- as fir
~on S-ewe.
● Shri*ge caused by overheating occurs in certain knit fibrics that have been heat-
shaped. When washing, drying or ironing temperatures excdtbetemperatures used to
shape set, shrinkage may occur. This cannot be corrected, but it can be preventi by
washing in cold or warm water; drying on low heat.
● Leaving clothes in dryer after tumbling stops. Remove clothes prompdy and hang
them immediately.
● Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
● Too few items in dryer. If drying only one article, add two or more similar articles, even
if dry, to insure proper tumbling.
● Improper loads. Avoid laundering heavy Permanent Press items, such as work clothes,
with lighter Permanent Press items, such as shirts or blouses. Do not wash or dry
Permanent Press with regular laundry.
● Too many clothes in washer. Items must have room to move freely. Permanent Press
loads should always be smaller than regular loads..
.no more than medium loads.
● Use of incorrect wash and dry cycles. Use Permanent Press Wash Cycle which provides
a cool-down rinse to minimize wrin~ing. Also, use Permanent Press Dry Cycle.
● Incorrect water level. Use large water level for m~ium load; medium level or half full
for small load.
● Wmhing re~tiy in too hot water. Wash in cool or warm water with plenty ofdete~ent.
I
11

The fioblem Solver (continued)
PROBLEM POSSIBLE CAUSE AND REMEDY
WMNKLING IN ● Accumulation of lime scale due to use of carbonate detergents. If you must use a
PERMANENT PRESS
non-phosphate detergent, avoid the use of a high-carbonate detergent,
AND “NO-IRON”
ITEMS (continued)
● Failure to use fabric softener. Proper use of fabric sofiener will minimize wrintiing.
~ remove wrinMes:
. Retumble on “Permanent Press” setting.
.
Rerinse and dry on “Permanent Press” setting.
. If unsuccessful, retumble on high heat for 10-12 minutes and hang immediately.
● Iron carefully.
. Send to dry cleaners for pressing.
● Some wrinties may remain which cannot be removed?
*N~E: If you follow good laundry procedures and Permanent Press clothes still come
out wrirdded, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If you need more help.. call, toll free:
GE
bswer Center@
8W.62&2~
consumer information service
12

Care and Cleating
USER M~TENANCE
~STRU~IONS
God dryer care
The Drum. Porcelain enamel
drum is rust-resistant and requires
no special care.
The Exterior. Wipe off any spills or
washing compounds. Wipe or dust
with damp cloth. Try not to strike
the surface with
sha~ objects.
The Lint Filter. Wipe lint filter
before every use as described on
page 9. Periodically lint filter
should be removed and suction
hose from vacuum cleaner should
be inserted into the opening.
See below.
Do not obstruct the flow of
combustion and ventilating air. The
air intake is located on rear of dryer.
Dryer Exhaust: Inspect and clean
the dryer exhaust ducting at
least
once a year.
d
Wall
l— 3’, Minimum
Make sure there is at least 3”
clearance from rear dryer louvers
to the wall.
To store dryer: For short period of
time, disconnect power supply and
clean lint filter.
Do not store dryer where it will be
exposed to the weather.
13
CAUTIONS:
c Before having your electric dryer
connected in your new residence,
be sure your licensed electrician
confirms that the supply voltage
matches the voltage specified on
the rating plate.
c Dryer control panel and finishes
may be damaged by some laundry
pre-treatment soil and stain remover
products if such products are
sprayed on or have direct contact
with the dryer.
Apply these pre-treatment products
away from the dryer. The fabric
may then be washed and dried
normally. Damage to your dryer
caused by pre-treatment products
is not covered by your warranty.

14

Wdll Be There
With the purchase of your new GE appliance, receive the
assurance that if you ever need information or assistance
from GE, we’ll be there.
Al you have to do is cdl—toll-free!
GEAnswer Center@
In-Home Repak
Service
888-GE-CARES
AGE Consumer Service professional
will provide expert repair service,
scheduled at a time that’s convenient
for you. Many GE Consumer Service
company-operated locations offer you
service today or tomorrow, or at your
convenience
(7:00 a.m. to 7:00 p.m.
weekda~ 9:00 a.m. to 2:00 p.m. Satur-
days). Our factory-trained technicians
know your appliance inside and out—
so most repairs can be
handed in just
one visit.
Service Contracts
800-626-~4
Whatever your question about any GE
major
applimce, GE Answer Cente@
information service is available to
help. Your
cdl—and your question—
will be answered prompdy and
courteously And you can
cdl any
time. GE Answer Cente@ service is
open 24 hours a day, 7 da~ a week.
You can have the secure feeling that
GE Consumer Service will still be
there after your warranty expires. Pur-
chase a GE contract while your war-
ranty is still in effect and you’ll receive
a
substarttid discount. With a multiple-
year contract, you’re assured of future
service at today’s prices.
Telecommunication Detice for the Deaf
Patis andAcce~ories
800-626-2002
hdividu& qutiled to service their
own appliances can have needed
parts or accessories sent direcdy to
their home, free of shipping charge!
The GE parts system provides access
to over 47,000 parts . . . and dl GE
Genuine Renewal Parts are fully
warranted. WSA, MasterCard and
Discover cards are accepted.
User maintenance instructions
contained in this
booMet cover p~
dures intended to be performed by
any user. Other servicing
genedy
shodd be refemd to qu=ed ser-
vice personnel. Caution must be
exercised, since improper servicing
may cause unsafe operation.
For Customers W&h
Special Needs.,.
80~6262000
Upon request, GE will provide Bradle
controls for a variety of GE appliances,
and a brochure to assist in pIanning a
barrier-free kitchen for persons with
limited mobility To obtain these
item>
free of charge,
cdl 800.626.2000.
Consumers with impaired hearing
or speech who have access to a TDD
or a conventional teletypewriter may
cdl 800-TDD-GEAC (800-833-4322)
to request information or service.

YOUR GE AUTOMATIC CLOTHES DRYER
WARRANTY
‘1
Save proof of original purchase date such as your sales slip or cancelled check to establish warranty period.
WHAT IS COVERED
FULL ONE-YEAR WARRANTY
For one year from date of original
purchase, we will provide, free of
charge, parts and service labor
in your home to repair or replace
any pan of the dryer that fails
because of a manufacturing
defect.
This warranty is extended to
the original purchaser and any
succeeding owner for products
purchased for ordinary home use
in the 48 mainland states, Hawaii
and Washington, D.C. In Alaska the
warranty is the same except that it
is LIMITED because you must pay to
ship the product to the service shop
or for the service technician’s travel
costs to your home.
All warranty service will be provided
by our Factory Service Centers or
by our authorized Customer Care”
servicers during normal working
hours.
Look in the White or Yellow Pages
of your telephone directory for
GENERAL ELECTRIC COMPANY,
GENERAL ELECTRIC FACTORY
SERVICE, GENERAL ELECTRIC-
HOTPOINT FACTORY SERVICE or
GENERAL ELECTRIC CUSTOMER
CARE@ SERVICE.
WHAT IS NOT COVERED
● Service trips to your home to
teach you how to use the product.
Read your Use and Care material,
If you then have any questions
about operating the product,
please contact your dealer or our
Consumer Affairs office at the
address below, or call, toll free:
GE Answer
Center@
800.626.2000
consumer information service
c Replacement of house fuses or
resetting of circuit breakers.
. Failure of the product if it is used
for other than its intended purpose
or used commercially.
● Damage to product caused
by accident, fire, floods or acts
of God.
WARRANTOR IS
NOT RESPONSIBLE
FOR CONSEQUENTIAL DAMAGES.
● Improper installation.
If you have an installation problem,
contact your dealer or installer.
You are responsible for providing
adequate electrical, exhausting
and other connecting facilities.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
[ I
Pan No. 113D5497P174
DDE8000M
Pub. No. 49-9668 DDG8080M
6.90 CG