
Listed by
Underwriters
Laboratories
Dimensions anD installation information (in inches)
PK7500Df
Profile™Series 27" Built-In Double Convection Wall Oven
Specification Revised 5/15
For answers to your Monogram,® GE Profile™
or GE®appliance questions, visit our website
at geappliances.com or call GE Answer Center®
service, 800.626.2000.
Most 30" Wall Cabinets Can be used
With this unit.
note: These ovens are not approved for
stackable installations. Cabinets installed
adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
install ation inforMation:
Before installing, consult installation
instructions packed with product for
current dimensional data.
Side-by-side installations require at
least 2" between cutouts.
CK7500
PK7500
JK5500
JK3500
Cabinet 27"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 1"
C – Overlap of oven at bottom of cutout 1"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 51-1/8"
F – Overall width 26-3/4"
Cutout depth
23-1/2" MIN
8-3/4"
MAX.
44" to
bottom of
junction box
D
F
E
Conduit
40"
Junction box
location
C
L
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and ush with sides of cutout
or solid bottom oor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the oor
13-1/4"
Cutout height
49-11/16" MIN.
50-1/8" MAX.
23" minimum
door opening
allowance
22"
CK7500
PK7500
JK5500
JK3500
Cabinet 27"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 1"
C – Overlap of oven at bottom of cutout 1"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 51-1/8"
F – Overall width 26-3/4"
Cutout depth
23-1/2" MIN
8-3/4"
MAX.
44" to
bottom of
junction box
D
F
E
Conduit
40"
Junction box
location
C
L
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and ush with sides of cutout
or solid bottom oor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the oor
13-1/4"
Cutout height
49-11/16" MIN.
50-1/8" MAX.
23" minimum
door opening
allowance
22"
CK7500
PK7500
JK5500
JK3500
Cabinet 27"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 1"
C – Overlap of oven at bottom of cutout 1"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 51-1/8"
F – Overall width 26-3/4"
Cutout depth
23-1/2" MIN
8-3/4"
MAX.
44" to
bottom of
junction box
D
F
E
Conduit
40"
Junction box
location
C
L
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and ush with sides of cutout
or solid bottom oor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the oor
13-1/4"
Cutout height
49-11/16" MIN.
50-1/8" MAX.
23" minimum
door opening
allowance
22"
CK7500
PK7500
JK5500
JK3500
Cabinet 27"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 1"
C – Overlap of oven at bottom of cutout 1"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 51-1/8"
F – Overall width 26-3/4"
Cutout depth
23-1/2" MIN
8-3/4"
MAX.
44" to
bottom of
junction box
D
F
E
Conduit
40"
Junction box
location
C
L
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and ush with sides of cutout
or solid bottom oor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the oor
13-1/4"
Cutout height
49-11/16" MIN.
50-1/8" MAX.
23" minimum
door opening
allowance
22"
PK7500
KW rating
240V 7.2
208V 5.4
breaKer size
240V 30 Amps
208V 30 Amps