GE Profile Advantium SCB2000F User guide

SCB2000F – Advantium™Wall Oven
Dimensions (in inches)
TM
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
® GE Profile™or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center®service, 800.626.2000.
Specification Revised 11/03
240428
Most 30" Wall Cabinets can be used with this unit.
Cutout width
28-1/2
30
Required
cutout location
36-3/4"
minimum
from floor
Junction
box
location
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16
21
Cutout height
AB
19
Cutout depth
29-25/32
21-7/8
15-27/32
Excluding
Handle
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Note: Cabinets installed adjacent to wall ovens must have an adhesion
spec of at least 194°F temperature rating.
Note: 2" minimum between cutouts when installed above warming
drawer or single wall oven.

TM
SCB2000F –Advantium™Wall Oven
36-3/4" Min.
Required
30" 19"
Min
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
28-1/2"
21"
36-3/4" Min.
30" 24"
Min. Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
2" Min.
Install 2 x 4
or 2 x 2
Runners or
Solid Bottom,
Must Support
100 lbs.
28-1/2"
21"
9-1/4"
*45-1/4"
30" 24"
Min. Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
2" Min.
Per Oven
Requirement
28-1/2"
21"
Single Speedcook Installation
Order a 30" wide single oven cabinet or cut the opening
in a wall to dimensions shown.
The rough opening must be:
• Depth – 19" Min.
• Width – 28-1/2" Min.
• Height – 21" Min.
• 36-3/4" from the floor to the cutout is required.
• These ovens require 3/4" overlap on each side, top and
bottom of the cutout.
• Oven overlaps will conceal cut edges on all sides of
the opening.
Specification Revised 11/03
240428
Note: Additional clearance between the cutouts may be
required. Check to be sure the oven supports above
the Warming Drawer location does not obstruct the
required interior 23-1/2”depth and 9-1/4”height.
See installation instructions for details.
Speedcook Oven Installation above a single
GE Built-In Wall Oven
Speedcook Oven Installation above a
GE Warming Drawer
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®GE Profile™or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center®service, 800.626.2000.

TM
Specification Revised 11/03
240428
SCB2000F –Advantium™Wall Oven
Features and Benefits
•Revolutionary Speedcook Technology Cooks Oven-Quality Food
Up to Eight Times Faster Than a Conventional Oven
•Over 100 Pre-Programmed Menu Items, Repeat Last, Help and Demo Modes
•Electronic Scrolling Display with Variable Scroll Speed
•Bakes, Browns, Broils, Grills and Roasts –All with No Preheating
•Converts to Fully Functional 950 Watt Sensor Microwave Oven
•Family-Size Oven with Stainless Steel Interior
•Microwave Oven Features Humidity Sensor and Auto Defrost/Time Defrost
•Cooking Complete Reminder with Beeper Sound Level Control
•Interior Oven Light
•Child Lock Out
•Sculptured Handle
•Frameless Glass Oven Door with Window
•Cookbook and Pan Set Included
•Model SCB2000FWW –White on white
•Model SCB2000FBB –Black on black
•Model SCB2000FCC –Bisque on bisque
•Model SCB2001FSS –Stainless steel
SPEED
COOKPOWER
LEVELTIMERMICRO
WAVE
BACK
MICRO
EXPRESS
HELP
OPTIONS
MANUAL
COOK
REPEATLASTOVENLIGHT
RECIPE
START
PAUSE
CLEAR
OFF