GE 94931 User manual

Universal
Remote Control
RM94931
INSTRUCTION
MANUAL
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 1

1
Table Of Contents
Button Description . . . . . . . . . . . . . . . . . . . 1-2
Battery Installation. . . . . . . . . . . . . . . . . . . . . 2
Programming forTV. . . . . . . . . . . . . . . . . . . . 4
Programming for VCR . . . . . . . . . . . . . . . . . . 5
Programming for Cable Box or Satellite . . . 6
DVD or AUX Button . . . . . . . . . . . . . . . . . . . . 7
Code Search . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Retrieving Codes . . . . . . . . . . . . . . . . . . . . . . 9
Television Menu Function. . . . . . . . . . . . 10-11
DBS Menu Function . . . . . . . . . . . . . . . . 12-13
Sleep Feature . . . . . . . . . . . . . . . . . . . . . . . . 14
Trouble Shooting . . . . . . . . . . . . . . . . . . 15-16
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Instructions in Spanish. . . . . . . . . . . . . . 17-31
Device Codes. . . . . . . . . . . . . . . . . . . . . . 32-36
Button Description
INDICATOR LIGHT
The Indicator Light flashes to show that the remote
is working.
ON•OFF
The ON•OFF button operates the same as your
original remote (note: some RCA, GE and ProScan
models require you to press the device key to turn
the device on and the ON•OFF key to turn the
device off).
CODE SEARCH
Used to program the remote or to search through
codes.
TV, VCR, DVD•AUX, CBL•SAT
TheTV, VCR, DVD•AUX and CBL•SAT buttons are
used to select the device you want to control.
REVERSE, PLAY, FORWARD, RECORD, STOP,
PAUSE
The REVERSE, PLAY, FORWARD, RECORD, STOP
and PAUSE buttons operate the same as on your
originalVCR remote.You must press the RECORD
button twice to begin recording. Buttons also con-
trol similiar functions for DVD and CD players.
TV•VCR
TheTV•VCR button operates theTV•VCR function of
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 2

yourVCR.
ENTER
The ENTER button is used to complete channel
selection for some brands ofTV. It is also used to
complete the code entry process.
VOL & CHAN
TheVOL (Volume) and CH (Channel) buttons
increase or decrease channel numbers or volume.
MUTE
To MUTE the volume on theTV.
PREV CH
PREV CH allows you to go to the previous channel
you selected. Operates the same as Last Channel,
Go Back or Recall button on your original remote.
0-9
The number buttons operate the same as on your
original remote, and are used for entering device
codes or channel numbers.
MENU
The MENU button calls up theTV and DBS set up
menus.
Activates lighted keys. Keys remain lit for about 10
seconds.
Battery Installation
Your Universal Remote requires two (2)
new AAA alkaline batteries.To install the
batteries:
1. On the back of the remote, push and
slide the cover off.
2.Match the batteries to the + and -
marks inside the battery case, then
insert the batteries.
3.Press and slide the battery cover back
into place.
Note: Programmed codes will remain in
memory for a short period of time allowing
for battery replacement. If batteries have
been dead for a prolonged period of time,
2
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 3

reprogramming may be required.
Button Description
3
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 4

Programming For TV
1. Manually turn on theTV.
2. Press and hold the
SETUP button until
the INDICATOR LIGHT
lights, then release
the SETUP button.
3. Press and release the
TV button (the
INDICATOR LIGHT
will blink then
remain lit).
4. Find the three digit
code for yourTV in
theTV code list, and
enter it using the
Number Buttons.
After your code is
entered, the
INDICATOR LIGHT
will turn off.
5. Aim the remote at your
TV and press the
ON•OFF button.Your
TV should turn off.
Note: If yourTV does not
respond, try all the codes
for your brand. If the codes
do not work, or your brand
is not listed, try the Code
Search method on page 8.
6. With yourTV on, press
CH+. If theTV responds,
no further program-
ming is required.
7. Enter your code here
for easy reference. 4
ON•OFF
123
456
789
0
(OFF)
(BLINK)
INDICATOR
LIGHT
TV
SETUP
TV CODE
CHAN +
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 5

Programming For VCR
1. Manually turn
on theVCR.
2. Press and hold
the SETUP button
until the INDICATOR
LIGHT lights, then
release the SETUP
button.
3. Press and release
theVCR button (the
INDICATOR LIGHT
will blink then
remain lit).
4. Find the three digit
code for yourVCR
in the code list and
enter it using the
Number Buttons.
After your code is
entered, the INDICATOR
LIGHT will turn off.
5. Aim the remote at
yourVCR and press
the ON•OFF button.
YourVCR should turn off.
Note: If yourVCR does
not respond, try all
the codes for your
brand. If the codes
do not work, or your
brand is not listed,
try the Code Search
method on page 8.
6. With yourVCR on,
press CH+. If the
VCR responds,
no further
programming
is required.
7. Enter your code
here for easy reference.
5
ON•OFF
123
456
789
0
(OFF)
(BLINK)
INDICATOR
LIGHT
VCR
SETUP
VCR CODE
CHAN +
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 6

Programming For Cable Box or
Satellite Receiver
The CBL • SAT button is defaulted to
RCA/GE/ProScan DBS systems, however other DBS
systems can be programmed to this button.
1. Manually turn on
the Cable Box.
2. Press and hold the
SETUP button until
the INDICATOR LIGHT
lights, then release
the SETUP button.
3. Press and release
the CABLE button
(the INDICATOR
LIGHT will blink
then remain lit).
4. Find the three digit
code for your Cable
Box or Satellite Receiver
in the code list
and enter it using
the Number Buttons.
After your code is
entered, the
INDICATOR LIGHT
will turn off.
5. Aim the remote at
your Cable Box or satellite receiver and
press the ON•OFF button.Your Cable Box
should turn off.
Note: If your Cable Box
does not respond, try all
the codes for your brand.
If the codes do not work,
or your brand is not
listed, try the Code
Search method on
page 8.
6. With your Cable Box
on, press CH+. If the
Cable Boxor satellite
receiver responds,
no further program-
ming is required.
7. Enter your code here
for easy reference.
6
ON•OFF
123
456
789
0
(OFF)
(BLINK)
INDICATOR
LIGHT
CBL•SAT
SETUP
CBL•SAT CODE
CHAN +
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 7

7
The DVD•AUX Button
The DVD•AUX button can be used for a DVD play-
er. It can also be assigned to any other type of
device (anotherTV, VCR, DVD, CD Player, or audio
receiver).
1. Manually turn on the
the device you wish
to assign to the
DVD•AUX button
(TV,VCR or Cable
Box or DVD Player).
2. Press and hold the
SETUP button until
the INDICATOR LIGHT
lights, then release
the SETUP button.
3. Press and release the
DVD•AUX button.The
INDICATOR LIGHT
will blink.
4. Find the three digit code
for the device you wish
to program in the code list
Enter the code using the
Number Buttons.
After your code is
entered, the INDICATOR
LIGHT will turn off.
5. Aim the remote at your
device and press the
ON•OFF button.Your
device should turn off.
Note: If your device
does not respond, try
all the codes for your
brand. If the codes do
not work, or your brand
is not listed, try the
Code Search method
on page 8.
6. With your device on,
press CH+. If the
device responds,
no further program-
ming is required.
7. Enter your code here
for easy reference.
ON•OFF
123
456
789
0
(OFF)
(BLINK)
INDICATOR
LIGHT
DVD•AUX
SETUP
DVD•AUX CODE
CHAN +
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 8

8
Programming With Code Search
If yourTV, VCR, DVD.CD player, satellite receiver,
or Cable Box does not respond after you have
tried all the codes for your brand, or if your
brand is not listed, try searching for your code
by following the steps below.
1. Turn on the device
you wish to program.
2. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
3. Press and release the
device button for the
device you are
programming.The
INDICATOR LIGHT
will blink once then
remain lit.
4. Press and release
ON•OFF until your
device turns off.
Important:You may
have to press ON•OFF
up to 200 times.
5. When your device
turns off, press the
ENTER button, the
INDICATOR LIGHT
will go off.
ON•OFF
INDICATOR
LIGHT
SETUP
VCR TV
DVD•AUX
CBL•SAT
(BLINK)
OFF
ENTER
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 9

Retrieving Codes
If you need to find the three-digit code for your
TV, VCR, DBS Receiver, or Cable Box after your
device is set-up using Code Search, use this
procedure.
1. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
2. Press and release the
device button for the
device’s code you are
retrieving .The
INDICATOR LIGHT
will blink once then
remain lit.
3. Press and release
SETUP.The
INDICATOR LIGHT
will turn off.
4. Starting with 0 on the
keypad, press the
number buttons in
order (0-9) until the
INDICATOR LIGHT
blinks.
5. The number which
causes the INDICATOR
LIGHT to blink is the
first digit of your code.
6. Repeat step 4 until you
have retrieved all three
numbers in the code.
9
INDICATOR
LIGHT
SETUP
VCR TV
DVD•AUX
CBL•SAT
(BLINK)
OFF
SETUP
09
. . .
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 10

10
Television Menu Function
TheTV Menu is used to make changes in theTV
settings such as setting color, channels, timers,
etc.
Entering theTV Menu Mode:
1. Push theTV button
on the remote.
2. Push the MENU button.
This puts the remote in
TV Menu Mode.TheTV
Menu should now be
visible on the television.
The INDICATOR LIGHT
will blink continuously
to indicate the remote
is now inTV Menu Mode.
While inTV MENU these
buttons will function
as follows:
VOL UP/DOWN buttons
will operate as CURSOR
RIGHT/LEFT
CH+/- keys will operate as
CURSOR UP/DOWN.
For RCA, GE, and ProScan
TVs, pushing the MENU
button will select the
highlighted item.The
numberic buttons may
also be used to select
the MENU choice.
Note: Not all functions
in competitive models
(BLINK)
TV
(BLINK)
MENU
MENU
TV
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 11

11
and brands of televisions
may be fully supported.
Exiting theTV Menu Mode:
To exit the Menu Mode
and clear theTV screen
push theTV button on the
remote.The INDICATOR
LIGHT should go out
indicating the remote is
now out ofTV Menu Mode
and will revert to it’s
normal mode of operation.
Note:The remote will automatically exit theTV
Menu Mode after 10 seconds of inactivity with
no buttons being pushed.
Special Notes:
1. Because of the wide variety of menu formats,
some experimenting may be required.
2. SONY: Pressing the ENTER button while in
menu mode returns to previous menu.
3. ZENITH: Push the menu button a second
time to move from the SET-UP MENU to the
VIDEO MENU.
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 12

DBS Menu Function
The DBS Menu is used to navigate thru the
Guide screens, to make changes in the DBS set-
tings such as channel lists, passwords, etc.
Entering the DBS Menu Mode:
1. Push the CBL•SAT
button on the remote.
2. Push the MENU button.
This puts the remote in
DBS Menu Mode.The
DBS Menu should now
be visible on the
television.The
INDICATOR LIGHT will
blink continuously to
indicate the remote is
now in DBS Menu Mode.
While in DBS MENU
these buttons will
function as follows:
VOL UP/DOWN
buttons will operate as
CURSOR RIGHT/LEFT
CH+/- keys will operate as
CURSOR UP/DOWN.
For RCA, GE, and ProScan DBS Systems, push-
ing the MENU button will select the highlighted
item.The numberic buttons may also be used to
select the MENU choice.
Note: Not all functions in competitive models
and brands of DBS systems may be fully sup-
ported.
12
(BLINK)
INDICATOR
LIGHT
CBL•SAT
MENU
VOLUME + or -
CHANNEL + or -
MENU
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 13

13
Exiting the DBS Menu Mode:
To exit the Menu Mode
and clear theTV screen
push the CBL•SAT button
on the remote.The
INDICATOR LIGHT should
go out indicating the
remote is now out of
DBS Menu Mode and will
revert to it’s normal mode
of operation.
Note:The remote will automatically exit the
CBL•SAT Menu Mode after 10 seconds of inac-
tivity with no buttons being pushed.
Special Notes:
1. Because of the wide variety of menu formats,
some experimenting may be required.
2. SONY: Pressing the ENTER button while in
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 14

14
menu mode returns to previous menu.
Trouble
Shooting
Problem
Indicator light not
blinking when you
press any key
The remote does
not operate your
device
Not performing
commands properly
Problems programming
aTV/VCR Combo Unit
VCR not recording
Channel up and down
do not function on an
RCA TV
Problems changing
channels
Solution
A) Replace the batteries
(with fresh, new AAA
Alkaline batteries).
B) Check that batteries
are properly installed.
A) Try all the codes list-
ed for your brand.
B) Try the Code Search
method (page 8).
Start Code Search over
again to locate the proper
code.
Try theVCR code for your
brand. Some combo
units, however, may
require both aTV and a
VCR code for full opera-
tion.
As a safety feature on
your remote, you must
press the REC button
twice.
Due to some designs, the
original remote will only
perform these functions.
If your original remote
required ENTER after a
channel, press ENTER
after you select a
channel.
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 15

15
Problem
No response after
pressing a key
Sleep feature does
not work
Reprogramming may be required after batteries
are removed.
90 Day Limited Warranty
Jasco Products Company warrants this product to
be free from manufacturing defects for a period of
ninety days from the original date of consumer pur-
chase. This warranty is limited to the repair or
replacement of this product only and does not
extend to consequential or incidental damage to
other products that may be used with this unit. This
warranty is in lieu of all other warranties express or
implied. Some states do not allow limitations on
how long an implied warranty lasts or permit the
exclusion or limitation of incidental or consequen-
tial damages, so the above limitations may not
apply to you. This warranty gives you specific
rights, and you may also have other rights which
vary from state to state. If unit should prove defec-
tive within the warranty period, return prepaid with
Solution
A) Make sure you have
new batteries, and you
are aiming your
remote at
your devices.
B) Check that batteries
are properly installed.
See page 2.
Remote must remain
aimed at television after
sleep is set in order for it
to work.
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 16

16
dated proof of purchase to:
Jasco Products Company
311 N.W. 122nd
Oklahoma City, OK. 73114
Óndice
La Descripción Del Botón 16-17
Instalación De la Batería 17
Descripcion de Botones 18
Programación para laTelevisor 19
Programación para elVCR 20
Programación para la Caja Del Cable 21
El Botón de SAT•AUX 22
Programación con Búsqueda del Código 23
Extraer Códigos 24
Función Del Menú De laTelevisión 25-26
Función Del Menú De la DBS 27
Característica Del Sueño 28-29
Localización de Averías 29
Garantia Limitada de Noventa 30
Codigo Listas 31-36
Descripción De Botón
La Luz de Indicador
La luz de indicador contellea para mostrar que el remoto
está funcionando.
ON•OFF
El botón de ON•OFF funciona igual que su remoto original
(nota: algunos modelos de RCA, de la GE y de ProScan
requiérale presionar el clave del dispositivo para dar
vuelta el dispositivo encendido y el clave ON•OFF para dar
vuelta al dispositivo apagado).
Buscar Para Códigos
Para programar el remoto o para buscar con códigos.
TV, VCR, DVD•AUX, CBL•SAT
Los botones deTV, VCR, DVD•AUX, CBL•SAT se utilizan
para seleccionar el dispositivo que usted desea controlar.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE
Los botones de REVERSE, PLAY, FORWARD, RECORD,
STOP, PAUSE funcionan igual que en su remoto original
delVCR. Usted debe presionar el botón "RECORD" dos
veces para empiezar un grabación.
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 17

TV•VCR
El botón deTV•VCR funciona la función deTV•VCR de su
VCR.
ENTER
El botón de "ENTER" se utiliza para terminar la selección
de canal para algunas marcas de laTV.También se utiliza
para terminar el proceso de la entrada del código.
VOL & CHAN
Las flechasVOL (volumen) y CH (del canal) aumente o dis-
minuya los números de canal o volumen.
MUTE
Para apagar el volumen en laTV.
PREV CH
El canal anterior permite que usted vaya al canal anterior
que usted seleccionó. Funciona igual que acanalan, van
por último botón detrás o de memoria en su remoto origi-
nal.
0-9
Los botones del número funcionan igual que en su tele-
control original, y se utilizan para entrar en códigos de dis-
positivo o los números de canal.
MENU
El botón del MENU llama encima de las menús.TV y de
DBS fijado.
SLEEP
El botón del SLEEP permite que usted fije una época de
dar vuelta apagado a laTV automáticamente.
Instalación De la Batería
Su remoto universal requiere dos (2) acumu-
ladores alcalinos nuevos del AAA. Para instalar las
baterías:
1. En la parte posteriora del remoto, empuje y res
bale la cubierta apagado.
2. Corresponda con las baterías a las marcas + y -
dentro de la caja de la batería, entonces insertan
las baterías.
3. Presione y resbale la cubierta de la batería nue
vamente dentro de lugar.
Nota: Seguirá habiendo los códigos programados
en la memoria por un período de la hora corto per-
17
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 18

mitiendo para el reemplazo de la batería. Si las
baterías han sido muertas por un período del tiem-
po prolongado, la reprogramación puede ser
requerida.
Descripción de Botón
18
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 19

Programación para la Televisor
1. Gire manualmente
la prensa de la TV
2. Presione y sostenga el
botón de SETUP hasta
que las luces de
INDICATOR LIGHT,
después suelta el botón
de la SETUP.
3. Presione y soltar el
botón de la TV (sigue
habiendo INDICATOR
LIGHT entonces
centelleo se encendió).
4. Encuentre el código
de tres cifras para su
TV en la lista de código
de la TV e incorpórelo
que usa los botones
del número. Después de
que se introduzca su
código, INDICATOR LIGHT
dará vuelta apagado.
5. Apunte el remoto a su
TV y presione el botón
de ON•OFF. Su TV debe
dar vuelta apagado.
Nota: Si no responde su TV, intente todos los códigos para
su marca. Si los códigos no trabajan, o su marca no se enu-
mera, intente el método de la búsqueda del código en la
paginación 24.
6. Con su TV encendido,
presione CH+. Si
responde la TV, se
requiere la programación
19
ON•OFF
123
456
789
0
(OFF)
(BLINK)
INDICATOR
LIGHT
TV
SETUP
TV CODE
CHAN +
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 20