Gecko GG500010 Dimensions and installation guide
Thank you for purchasing another quality Gecko product.
Introducing Gecko Smart USB Wall Charger, this high powered wall
charger features auto-sense smart charge and is suitable for any USB
charging device.
Frequently Asked Questions
How do I use the wall charger to charge my device?
Simply ensure your charger is correctly connected to power and insert
the USB end of your charging cable into the USB port of the charger.
Then plug your device into the other end of your cable for recharging.
How do I know when my device is charged?
There are variations between different smartphone and tablet models,
please check your device’s user manual to confirm. In most cases
the charge level will be shown as a battery symbol or percentage at
the top of your device screen.
What is auto-sense smart charge?
Auto-sense smart charge detects the device and adjusts
the USB power to provide the fastest possible charge.
Please enjoy.
Yours sincerely
Gecko Team
WARRANTY INFORMATION - FOR AUSTRALIAN CONSUMERS ONLY
Powermove Distribution provides its accessory range of products with a 1
Year back to base warranty:“Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure”.
The warranty offered is in addition to other rights and remedies offered under
consumer law.
The conditions contained in this warranty apply to purchases made within
Australia only.
Purchases made outside of Australia are covered by the warranty procedures
and policies that comply with each respective place of purchase.
Conditions of warranty:
a. The consumer must retain proof of purchase for the warranty period.
b. The warranty period is valid for 1-year from the original purchase date.
c. The warranty applies only to defects in material or workmanship that occur
during normal use of the product.
d. The warranty is a ‘back-to-base’ warranty meaning the consumer is
responsible for the costs associated with returning the product to their place
of purchase or to Powermove Distribution.
e. The consumer must return the goods, original packaging (where feasible)
and proof of purchase to make a warranty claim.
f. If a replacement product is supplied the warranty period applies to the
balance of the warranty period from the original purchase date.
The warranty does not cover:
a. Failure that has occurred as a result of accident, abuse or mis-treatment.
b. Goods that are damaged as a result of other third party products.
c. Any misrepresentations given that are not covered by the warranty.
Warranty claim procedure:
a. The consumer must return the goods as per the requirements stated
in ‘conditions of warranty’ section d & e.
b. If the consumer is unable to return the goods to the place of purchase they
can send the goods with the required packaging and documentation, along
with their contact details including address, phone number and e-mail to:
Warranty Department
Powermove Distribution
28 The Gateway
Broadmeadows, Vic 3047
Ph: 03 9358 5999 Fax: 03 9357 1499
E-Mail: support@powermove.com.au
Included in this pack:
2.4A USB Wall Charger
Technical Specifications:
Input: 100-240V AC, 50/60Hz, 600mA
Output: 5V DC, 2.4A
All registered trademarks, trademarks, brand names or product names are
the property of their respective owners.
©2017 Gecko Gear Australia Pty Ltd. 71 Anzac Highway, Ashford, SA, 5035.
All Rights Reserved.
Gecko Smart USB Wall Charger
User Manual and Warranty
WARNING!
- Please use caution and care when handling any device with electrical power.
- Please refer to your country’s governing electrical body for the latest information
on handling products with electrical power.
Basic precautions for using the Gecko Smart USB Wall Charger
- Always leave space around the wall charger and do not use the wall charger
in a location where airflow around the wall charger is confined.
- Never force a connector into a port. If the connector and port do not join with
reasonable ease, they may not match each other.
- Make sure that the connector matches the port and that you have positioned
the connector correctly in relation to the port before plugging them together.
- To reduce the chance of shock or injury, do not use your wall charger in or near
water or wet locations.
- When connecting or disconnecting your wall charger, always hold the wall charger
by its sides. Keep fingers away from the metal parts of the plug.
- Before connecting anything to the wall charger, make sure there are no foreign
objects inside the wall charger connector or device port.
- The wall charger is a high-voltage component and should not be dismantled for any
reason. If the wall charger needs service, please refer to your place of purchase.
- If you notice the wall charger appears to be in any way damaged, cracked or broken
please do not use the wall charger and refer to your place of purchase.
USB port
