Gefen DVI-1000ST User manual

www.gefen.com
f
DVI 1000 ST
Optical Extension
EXT-DVI-1000ST
User Manual

Technical Support:
Telephone [phone]
[phone]
Fax [phone]
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
[email protected]
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
DVI•1000ST is a trademark of Gefen Inc.
© 2008 Gefen Inc., All Rights Reserved
All trademarks are the property of their respective companies
ASKING FOR ASSISTANCE

CONTENTS
1 Introduction
2 Operation Notes
3 Features
4 Sender Panel Layout
5 Sender Panel Descriptions
6 Receiver Panel Layout
7 Receiver Panel Descriptions
8 Connecting And Operating The DVI•1000ST
9 Network Cable Wiring Diagram
10 Specifications
11 Warranty

1
Congratulations on your purchase of the DVI•1000ST. Your complete satisfaction
is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen DVI•1000ST
The Gefen DVI•1000ST extends your DVI display up to 500 meters (1640 ft) from
your source. It’s equipped with ST fiber optic connectors designed to withstand
the extensive use that takes place in rental and staging markets. Like the DVI-
1000 HD, this model delivers an easy, reliable and advanced method of high defi-
nition video extension while maintaining resolutions up to 1080p or 1920x1200
for computers.
How It Works
The DVI•1000STS sender unit connects to your computer, set-top box or DVD
player with the supplied cables. The DVI•1000STR receiver unit connects to your
DVI display - up to 500 meters (1640 ft) away. A four strand fiber optic cable and
one CAT5 cable connect the sender (source) to the receiver (display).
INTRODUCTION

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI•1000ST
The fiber optics cable must be treated carefully when connectors are• exposed. They are susceptible to dust which can contribute to loss of pixels.
The DVI 1000 ST works for all DVI displays and supports resolutions up to• 1920x1200
The DVI 1000 ST is housed in a metal box for better RF shielding.•
Supports DDWG standard for DVI compliant monitors.•
Uses CAT-5 cable for HDCP/DDC and control signals.•
2
OPERATION NOTES

3
Features
Extends any DVI compliant device up to 1640 feet/500 meters (330 feet with• HDCP) from the computer
Uses a four strand fiber optic cable and one CAT-5e cable for DDC and• control signals
Supports resolutions up to 1080p, 2K, and 1920 x 1200•
Supports DDWG standard for DVI compliant monitors•
HDCP compliant•
Package Includes
(1) DVI•1000ST Sender
(1) DVI•1000ST Receiver
(1) 6 Foot DVI Cable
(1) 12V Power Supply
(1) User’s Manual
FEATURES

4
Front Panel
Back Panel
32
89
1
456 7
SENDER PANEL LAYOUT

5
Power LED1. This LED will be active when the supplied 12V DC power adapter is connected.
Status LED2. This LED will be active when a solid link has been established between the
sender and receiver units.
Clock ST Fiber Connector3. Connect the Fiber cable that will be used to transmit the Clock signal to this
connector.
Red ST Fiber Connector4. Connect the Fiber cable that will be used to transmit the Red signal to this
connector.
Green ST Fiber Connector5. Connect the Fiber cable that will be used to transmit the Green signal to this
connector.
Blue ST Fiber Connector6. Connect the Fiber cable that will be used to transmit the Blue signal to this
connector.
DDC CAT-5e Connector7. The CAT-5e that will carry the DDC information needs to be connected between
the sender and receiver units.
DVI Input8. Connect the DVI source to this connector. This connector is limited to a digital
single link DVI signal only.
+12V DC Power Connector9. Connect the included 12V DC power adapter to this connector.
SENDER PANEL DESCRIPTIONS

6
Front Panel
Back Panel
32
1
456 7
89
RECEIVER PANEL LAYOUT

7
Power LED1. This LED will be active when the supplied 12V DC power adapter is connected.
Status LED2. This LED will be active when a solid link has been established between the
sender and receiver units.
Red ST Fiber Connector3. Connect the Fiber cable that will be used to receive the Red signal to this
connector.
Clock ST Fiber Connector4. Connect the Fiber cable that will be used to receive the Clock signal to this
connector.
Blue ST Fiber Connector5. Connect the Fiber cable that will be used to receive the Blue signal to this
connector.
Green ST Fiber Connector6. Connect the Fiber cable that will be used to receive the Green signal to this
connector.
DDC CAT-5e Connector7. The CAT-5e that will carry the DDC information needs to be connected between
the sender and receiver units.
DVI Output8. Connect the DVI monitor to this connector. This connector is limited to a digital
single link DVI signal only.
+12V DC Power Connector9. Connect the included 12V DC power adapter to this connector.
RECEIVER PANEL DESCRIPTIONS

8
How to Connect the DVI•1000ST
Connect the DVI 1000 ST sender unit to the DVI source using the supplied1. cables.
Connect the DVI 1000 ST receiver unit to your DVI display.2.
Connect the four fiber optics and one CAT5 cable between the sender and3. receiver.
Plug the 12VDC power supplies into the DVI 1000 ST receiver.4.
You should see a beautiful picture.5.
* Cable Requirement - 50 or 62.5 micron multi-mode fiber optics cable
CONNECTING AND OPERATING THE DVI•1000ST

12345678
Gefen has specifically engineered their products to work with the TIA/EIA-568-B
specification. Please adhere to the table below when field terminating cable for
use with Gefen products. Failure to do so may produce unexpected results and
reduced performance.
CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types.
Gefen recommends using solid core cabling. CAT-6 cable is also recommended
for best results.
Each cable run must be one continuous run from one end to the other. No splices
or use of punch down blocks.
Pin Color
1 Orange / White
2 Orange
3 Green / White
4 Blue
5 Blue / White
6 Green
7 Brown / White
8 Brown
9
NETWORK CABLE WIRING DIAGRAM

10
Video Amplifier Bandwidth ....................................................................... 165 MHz
Input Video Signal .............................................................................. 1.2 Volts p-p
Input DDC Signal ......................................................................... 5 Volts p-p (TTL)
Single Link Range .............................................................................. 1920 x 1200
DVI Input/Output Connector Type ................................................................ DVI-D
Link Connector ............................................................................................. RJ-45
Power Consumption ...................................................................... 15 Watts (max.)
Power Supply ............................................................................................. 12VDC
Dimensions ................................................................. 8.25”D x 9.125 ”W x 1.25”H
Shipping Weight .......................................................................................... 10 Lbs
SPECIFICATIONS