Gefen ULTRA HD EXT-HDBOOST-141 User manual

Audio
Embedder
3GSDI
Release A4
User Manual
EXT-HDBOOST-141
Booster for HDMI
with EDID Detective

Booster for HDMI with EDID Detective
Important Safety Instructions
ii
GENERAL SAFETY INFORMATION
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install or place this product near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. To reduce the risk of electric shock and/or damage to this product, never handle or
touch this unit or power cord if your hands are wet or damp. Do not expose this
product to rain or moisture.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Batteries that may be included with this product and/or accessories should never be
exposed to open ame or excessive heat. Always dispose of used batteries
according to the instructions.

Booster for HDMI with EDID Detective
Warranty Information
Gefen warrants the equipment it manufactures to be free from defects in material and
workmanship.
If equipment fails because of such defects and Gefen is notied within two (2) years from
the date of shipment, Gefen will, at its option, repair or replace the equipment, provided
that the equipment has not been subjected to mechanical, electrical, or other abuse or
modications. Equipment that fails under conditions other than those covered will be
repaired at the current price of parts and labor in effect at the time of repair. Such repairs
are warranted for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or tness for any particular purpose, all of
which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their original
condition.
The information in this manual has been carefully checked and is believed to be accurate.
However, Gefen assumes no responsibility for any inaccuracies that may be contained
in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. The technical information contained herein
regarding the features and specications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return Policy under
the Support section of the Gefen Web site at www.gefen.com.
PRODUCT REGISTRATION
Please register your product online by visiting the Register Product page under the
Support section of the Gefen Web site.
iii

iv
Booster for HDMI with EDID Detective
Gefen, LLC
c/o Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
Telephone: [phone]
[phone]
Fax: [phone]
Email: [email protected]
Visit us on the Web: www.gefen.com
Technical Support Hours: 8:00 AM to 5:00 PM Monday - Friday, Pacic Time
Booster for HDMI with EDID Detective
is a trademark of Gefen, LLC.
Important Notice
Gefen, LLC reserves the right to make changes in the hardware, packaging, and any
accompanying documentation without prior written notice.
HDMI, the HDMI logo, and High-Denition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing in the United States and other countries.
© 2013 Gefen, LLC. All Rights Reserved.
All trademarks are the property of their respective owners.
Contacting Gefen Technical Support
iv

v
• The Gefen Booster for HDMI with EDID Detective extends HDMI up to 150 feet
(45 meters) at 1080p Full HD and up to 115 feet (35 meters) at 4K x 2K Ultra HD
resolution, using standard copper HDMI cables to keep sources and displays in sync.
• The Gefen Booster for HDMI with EDID Detective comes pre-programmed with 6
default EDID proles as well as 6 user-programmable EDID banks.
• To access all features and select the Default EDID proles, refer to Installing the
Gefen EDID Tool+.
v
3GSDI Audio Embedder
Operating Notes
Booster for HDMI with EDID Detective

vi
Features
• Extends copper HDMI cables up to 150 feet (45 meters) at 1080p Full HD, and up to
115 feet (35 meters) at 4K x 2K Ultra HD
• Supports resolutions up to Ultra HD 4K x 2K (3840 x 2160 @ 30Hz), 1080p Full HD,
and 2048 x 1536 (QXGA)
• HDMI Features Supported:
►HDCP
►12-bit Deep Color
► LPCM 7.1 audio, Dolby® TrueHD, and DTS-HD Master Audio™
►3DTV pass-through
► Lip-Sync pass-through
► CEC pass-through
• USB port for advanced programming of features such as video equalization,
pre-emphasis, and EDID management
• DDC Re-clocking
• EQ adjustment for best results with varying cable types and lengths
• Can record the EDID from a display
• 6 pre-programmed EDID proles
• 6 user-programmable EDID banks for copying/uploading EDIDs
• Selectable HDCP pass-through
• Field-upgradable rmware via USB port
• Compact and portable
Packing List
The Booster for HDMI with EDID Detective ships with the items listed below. If any of these
items are not present in your box when you rst open it, immediately contact your dealer or
Gefen.
• 1 x Booster for HDMI with EDID Detective
• 1 x 1 ft. locking HDMI cable
• 1 x 6ft. USB Mini USB to USB
• 1 x 5V DC power supply
• 1 x Quick-Start Guide
Booster for HDMI with EDID Detective
Features and Packing List
1080P
®

3GSDI Audio EmbedderBooster for HDMI with EDID Detective
Table of Contents
viii
01 Getting Started
Panel Layout ......................................................................................................... 2
Front Panel.................................................................................................... 2
Back Panel .................................................................................................... 3
Right Panel.................................................................................................... 4
Left Panel ...................................................................................................... 4
Installation ............................................................................................................. 5
Connecting the Booster for HDMI with EDID Detective ................................ 5
Sample Wiring Diagram ................................................................................ 5
02 Operating the Booster for HDMI
with EDID Detective
EDID Programming ............................................................................................... 8
Programming an External EDID.................................................................... 8
Loading an EDID from a Bank .................................................................... 10
Storing an EDID to a Bank .......................................................................... 11
HDCP Control ............................................................................................. 12
Adjusting the Video Signal .................................................................................. 13
Using the EQ Switch ................................................................................... 13
Using Commands........................................................................................ 13
03 Advanced Operation
Using the Virtual COM Port................................................................................. 16
Installing the Driver ..................................................................................... 16
Commands.......................................................................................................... 20
04 Appendix
Default EDID Proles .......................................................................................... 42
Installing the Gefen EDID Tool+ .......................................................................... 45
Installing the Gefen EDID Tool+.................................................................. 45
Firmware Upgrade Procedure............................................................................. 48
Specications ...................................................................................................... 49