Gefen EXT-DVI-FM500 User manual

www.gefen.com
www.gefen.com
DVI FM500 Extender
EXT-DVI-FM500
User Manual
DVI FM500 Extender
EXT-DVI-FM500
User Manual
www ge
f
en com
User Manual
www gefen com
User M
a
nu
a
l
Us
er
M
an
ua
l

ASKING FOR ASSISTANCE
ASKING FOR ASSISTANCE Rev A4
Rev A4
Technical Support:
Telephone [phone]
[phone]
Fax [phone]
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday Pacific Time
Write To:
Gefen, LLC
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
[email protected]
Notice
Gefen, LLC reserves the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
DVI FM500 Extender is a trademark of Gefen, LLC
© 2011 Gefen, LLC All Rights Reserved
All trademarks are the property of their respective companies
Technical Support:
Telephone [phone]
[phone]
Fax [phone]
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday Pacific Time
Write To:
Gefen, LLC
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
[email protected]
Notice
Gefen, LLC reserves the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
DVI FM500 Extender is a trademark of Gefen, LLC
© 2011 Gefen, LLC All Rights Reserved
All trademarks are the property of their respective companies

CONTENTS
CONTENTS
1 Introduction
2 Operation Notes
3 Features
4 Panel Layout
5 Connecting And Operating The DVI FM500 Extender
6 EDID Programming
7 Specifications
8 Warranty
1 Introduction
2 Operation Notes
3 Features
4 Panel Layout
5 Connecting And Operating The DVI FM500 Extender
6 EDID Programming
7 Specifications
8 Warranty

1
1
INTRODUCTION
Congratulations on your purchase of the DVI FM500 Extender. Your complete satisfaction is very impor-
tant to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions that harness
integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products
supplement cross-platform computer systems, professional audio/video environments and HDTV
systems of all sizes with hard-working solutions that are easy to implement and simple to operate.
The Gefen DVI FM500 Extender
The DVI FM500 Extender lets you extend your DVI source up to 5,000 feet away using a 100% fiber
optic extension solution. Attractive and compact DVI-to-fiber modules connect to each other via just two
LC fiber optic cable strands. Extender units fit neatly behind equipment for a clean installation.
The on the fly EDID programming feature enables quick and correct synchronization of the video resolu-
tion to the display without any manual configuration. It’s a great way to extend DVI easily and cleanly.
How It Works
The DVI FM 500 Sender unit plugs into a DVI port (either a computer source or another device trans-
mitting a DVI signal). The DVI FM 500 Receiver unit plugs into a DVI display - up to 5,000 feet away.
Two-strand LC fiber optic cable connects the DVI FM 500 Sender unit and the DVI FM500 Receiver units
to each other. Power is connected to the DVI FM 500 receiver using the 5V wall adapter and a crisp,
vibrant HD picture appears on the display.
Congratulations on your purchase of the DVI FM500 Extender. Your complete satisfaction is very impor-
tant to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions that harness
integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products
supplement cross-platform computer systems, professional audio/video environments and HDTV
systems of all sizes with hard-working solutions that are easy to implement and simple to operate.
The Gefen DVI FM500 Extender
The DVI FM500 Extender lets you extend your DVI source up to 5,000 feet away using a 100% fiber
optic extension solution. Attractive and compact DVI-to-fiber modules connect to each other via just two
LC fiber optic cable strands. Extender units fit neatly behind equipment for a clean installation.
The on the fly EDID programming feature enables quick and correct synchronization of the video resolu-
tion to the display without any manual configuration. It’s a great way to extend DVI easily and cleanly.
How It Works
The DVI FM 500 Sender unit plugs into a DVI port (either a computer source or another device trans-
mitting a DVI signal). The DVI FM 500 Receiver unit plugs into a DVI display - up to 5,000 feet away.
Two-strand LC fiber optic cable connects the DVI FM 500 Sender unit and the DVI FM500 Receiver units
to each other. Power is connected to the DVI FM 500 receiver using the 5V wall adapter and a crisp,
vibrant HD picture appears on the display.
INTRODUCTION

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI FM500 EXTENDER
• The distance that DVI can be extended will depend on the type of fiber optic cable used. For a
maximum resolution of 1920x1200 at 60 frames per second (60 Hz), the distances possible are as
follows:
• Single mode: 8(9)/125 microns core: 1500m (5,000 ft)
• Multi mode: 50(62.5)/125 microns core: 500m (1,500 ft)
• There are two included power supplies. The receiver unit must always be powered using the
external power supply. If the LED on the sender unit does not activate once the source is
connected and powered, please use the second included power supply to provide operational
power to the sender unit.
• The EDID from the display is stored in the sender unit but must be recorded from the display first.
Please see instructions on page 6 for the proper EDID recording procedure.
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI FM500 EXTENDER
• The distance that DVI can be extended will depend on the type of fiber optic cable used. For a
maximum resolution of 1920x1200 at 60 frames per second (60 Hz), the distances possible are as
follows:
• Single mode: 8(9)/125 microns core: 1500m (5,000 ft)
• Multi mode: 50(62.5)/125 microns core: 500m (1,500 ft)
• There are two included power supplies. The receiver unit must always be powered using the
external power supply. If the LED on the sender unit does not activate once the source is
connected and powered, please use the second included power supply to provide operational
power to the sender unit.
• The EDID from the display is stored in the sender unit but must be recorded from the display first.
Please see instructions on page 6 for the proper EDID recording procedure.
OPERATION NOTES
2
2
OPERATION NOTES

3
3
FEATURES
Features
• Extends resolutions up to WUXGA (1920x1200) @60 Hz up to 5,000 feet away
• Immune to EMI (electromagnetic interference) thanks to all-fiber signal transmission media
• Automatic EDID Programming feature enables quick and correct sync of source to display
• Compact Sender and Receiver units install in minutes
• Supports single- and multi-mode fiber optic cable types
Package Includes
(1) DVI FM 500 Sender unit
(1) DVI FM 500 Receiver unit
(2) 5V 1A Power Supply
(1) User’s Manual
Features
• Extends resolutions up to WUXGA (1920x1200) @60 Hz up to 5,000 feet away
• Immune to EMI (electromagnetic interference) thanks to all-fiber signal transmission media
• Automatic EDID Programming feature enables quick and correct sync of source to display
• Compact Sender and Receiver units install in minutes
• Supports single- and multi-mode fiber optic cable types
Package Includes
(1) DVI FM 500 Sender unit
(1) DVI FM 500 Receiver unit
(2) 5V 1A Power Supply
(1) User’s Manual
FEATURES

4
4
PANEL LAYOUT
Sender Front Panel Receiver Front Panel
Sender Front Panel Receiver Front Panel
Sender Back Panel Receiver Back Panel
Sender Back Panel Receiver Back Panel
DVI In
DVI In
5V DC In
5V DC In
2 Strand LC-LC
Fiber Optic Cable Input
2 Strand LC-LC
Fiber Optic Cable Input
2 Strand LC-LC
Fiber Optic Cable Input
2 Strand LC-LC
Fiber Optic Cable Input
DVI Out
DVI Out
5V DC In
5V DC In
PANEL LAYOUT

5
5
CONNECTING AND OPERATING THE DVI FM500 EXTENDER
How to Connect the DVI FM500 Extender
Connecting the DVI FM500 Extender System
1. Record the monitor’s EDID using the instructions on the next page.
2. Connect the DVI FM500 Extender sender unit to the DVI source device.
3. Connect DVI FM500 Extender receiving unit to the DVI display.
4. Connect the DVI FM500 Extender sender and receiving units together using a user supplied LC
terminated single or multi-mode fiber optic cable.
NOTE: This unit will only operate with LC terminated single or multi-mode fiber optic cable.
5. Connect one of the included 5V DC power adapters to the DVI FM500 receiving unit.
6. Power on the DVI source.
NOTE: If the source does not supply the required 5V of operational power to the DVI FM500 Extender
sender unit, the second included power supply must be attached to the sender unit.
How to Connect the DVI FM500 Extender
Connecting the DVI FM500 Extender System
1. Record the monitor’s EDID using the instructions on the next page.
2. Connect the DVI FM500 Extender sender unit to the DVI source device.
3. Connect DVI FM500 Extender receiving unit to the DVI display.
4. Connect the DVI FM500 Extender sender and receiving units together using a user supplied LC
terminated single or multi-mode fiber optic cable.
NOTE: This unit will only operate with LC terminated single or multi-mode fiber optic cable.
5. Connect one of the included 5V DC power adapters to the DVI FM500 receiving unit.
6. Power on the DVI source.
NOTE: If the source does not supply the required 5V of operational power to the DVI FM500 Extender
sender unit, the second included power supply must be attached to the sender unit.
CONNECTING AND OPERATING THE DVI FM500 EXTENDER

6
6
EDID PROGRAMMING
EDID PROGRAMMING
EDID Program Button
LED
EDID Recording
Display information (EDID) contains resolution and timing information for your display. This information is needed
by the source for proper video output. Follow these steps to record the EDID of the display into the sender unit. If
you know that EDID is not required by the source, the followings steps for recording will not be necessary.
1. Power on the display.
2. Insert the included 5V DC power adapter into the sender unit. Using a small pin, press the EDID program
button on the sender unit. The LED on the top panel of the unit will blink twice and turn off.
3. Connect the DVI FM500 Extender sender unit to the display using a user/monitor supplied DVI cable.
4. The LED will blink rapidly for approximately 8 seconds while the EDID is being recorded. Once the LED
stops blinking and turns off again the monitors EDID will have been successfully recorded.
5. Disconnect the power adapter from the DVI FM500 Extender sender unit, and then disconnect the DVI
FM500 Extender sender unit from the display.
EDID Recording
Display information (EDID) contains resolution and timing information for your display. This information is needed
by the source for proper video output. Follow these steps to record the EDID of the display into the sender unit. If
you know that EDID is not required by the source, the followings steps for recording will not be necessary.
1. Power on the display.
2. Insert the included 5V DC power adapter into the sender unit. Using a small pin, press the EDID program
button on the sender unit. The LED on the top panel of the unit will blink twice and turn off.
3. Connect the DVI FM500 Extender sender unit to the display using a user/monitor supplied DVI cable.
4. The LED will blink rapidly for approximately 8 seconds while the EDID is being recorded. Once the LED
stops blinking and turns off again the monitors EDID will have been successfully recorded.
5. Disconnect the power adapter from the DVI FM500 Extender sender unit, and then disconnect the DVI
FM500 Extender sender unit from the display.
EDID Program Button
LED

7
7
SPECIFICATIONS
Maximum Single Link Resolution .............................................................................. WUXGA (1920x1200)
Operating Temperature .......................................................................................................... 0°C to +50°C
Storage Temperature .......................................................................................................... -10°C to +85°C
Operating Humidity .................................................................................................................... 5% to 85%
Formats Supported: ............................................................ Supports DVI 1.0 and DDC2B via virtual DDC
Default EDID ................................................................................................................ UXGA(1600x1200)
Dimensions .......................................................................................................... 1.5” / 0.6” / 2.7 “ (W/H/D)
Shipping Weight ................................................................................................................................... 1 lb.
Maximum Single Link Resolution .............................................................................. WUXGA (1920x1200)
Operating Temperature .......................................................................................................... 0°C to +50°C
Storage Temperature .......................................................................................................... -10°C to +85°C
Operating Humidity .................................................................................................................... 5% to 85%
Formats Supported: ............................................................ Supports DVI 1.0 and DDC2B via virtual DDC
Default EDID ................................................................................................................ UXGA(1600x1200)
Dimensions .......................................................................................................... 1.5” / 0.6” / 2.7 “ (W/H/D)
Shipping Weight ............................................................................................................................... 2.0 lb.
SPECIFICATIONS