Gefen EXT-DVI-1000HD User manual

DVI•1000ST
Related Products DVI•1000HD
Extends DVI up to 1640 feet (500 meters) over fiber optics cables.
The Gefen DVI-1000HD allows a single link video signal to be extended over long distances by
using multimode LC-LC fiber optic cable. Fiber Optics technology allows the DVI-1000HD to carry
video signals over long distances that would not be possible with traditional CAT5 extension. The
use of fiber optic cabling protects the video signal from electromagnetic interference (EMI) which
can degrade the video signal.
How It Works
The DVI•1000HDS sender unit sits next to your computer, set-top box or DVD player source.
Cables supplied with the DVI•1000HD connect your DVI source to the send unit. The
DVI•1000HDR receive unit sits next to your DVI display - up to 1640 feet (330 feet HDCP) away.
The display plugs into the back of the DVI•1000HDR receiver unit. One CAT-5 cable and a multi
mode LC fiber optic cable (4 strand) connect the DVI•1000HDS and the DVI•1000HDR units to
each other.
Note: The DVI•1000HD is HDCP compatible.
DVI, HDCP, & HDMI Defined
Features:
zExtends any DVI (digital visual interface) compliant device
up to 1640 feet/500 meters (330 feet with HDCP) from the computer
zUses a four-strand multimode LC-LC fiber optic cable for video signals
zUses one CAT-5 cable for DDC and control signals
zEliminates computer noise where you work
zSupports resolutions up to 1080p, 2K, and 1920 x 1200
zSupports DDWG standard for DVI compliant monitors
zHDCP compliant
Specifications:
zVideo Amplifier Bandwidth: 165 MHz
zInput Video Signal:1.2 volts p-p
zInput DDC Signal: 5 volts p-p (TTL)
zDVI Connector: DVI-D (19 pin) female
zVideo Link Connector: LC
zDDC Link Connector: RJ-45 Shielded
zPower Supply: 12V DC
zPower Consumption: 36 watts (max)
zDimensions: 3.25" D x 4.25" W x 1" H
zShipping Weight: 5 lbs.
zRack mountable: 1U rack space
Package Includes:
zDVI•1000HDS
zDVI•1000HDR
zOne 12V Power Supply
zOne 6 ft DVI-SL cable (M-M)
zUser Manual
_
Dystrybucja i sprzedaż: Meditronik Sp. z o.o.
02-952 Warszawa, ul. Wiertnicza 129, tel. [phone], fax [phone]
http://www.meditronik.com.pl e-mail: [email protected]
EXT-DVI-1000HD

DVI • 1000HD
USER MANUAL
www.gefen.com

Technical Support:
Telephone [phone]
[phone]
Fax [phone]
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
[email protected]
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
The DVI 1000 is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE

TABLE OF CONTENTS
Introduction
Front Panel Descriptions
Back Panel Descriptions
How To Connect The DVI 1000
How To Connect The DVI 1000 (w/o DDC)
DVI 1000 Wiring Diagram
Specifications
Warranty
1
2
3
4
5
6
7
8

READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE DVI 1000
• The fiber optics cable must be treated carefully when connectors are exposed. They
are susceptible to dust which can contribute to loss of pixels.
• The DVI 1000 works for all DVI displays and supports resolutions up to 1920x1200
• The DVI 1000 is housed in a metal box for better RF shielding.
• Supports DDWG standard for DVI compliant monitors
• Uses CAT-5 cable for HDCP/DDC and control signals.
OPERATION NOTES

INTRODUCTION
Thank you for purchasing Gefen’ s ex•tend•it DVI 1000. The DVI 1000 allows extension
of DVI up to 1640 feet without losing any quality.
CONTENTS
The DVI 1000 consists of:
(1) DVI 1000S
(1) DVI 1000R
(1) DVI cable (6FT)
(1) 12VDC Power Supply
(1) User's Manual
1

HDCP & DDC Signals
DVI 1000 Sender (Front View Only)
Blue
Green
Red
Clock
Status LED indicates a link
between the sender and receiver
HDCP & DDC Signals
BlueGreen RedClock
Status LED indicates a link
between the sender and receiver
FRONT PANELS DESCRIPTIONS
Power LED indicates the unit is powered
DVI 1000 Receiver (Front View Only)
Power LED indicates the unit is powered
2

12 VDC Input
DVI 1000 Sender (Rear View Only)
DVI Input
BACK PANELS DESCRIPTIONS
DVI 1000 Receiver (Rear View Only)
3
12 VDC Input
DVI Output

Connect the DVI 1000 sender unit to the DVI source using the supplied cables.
Connect the DVI 1000 receiver unit to your DVI display.
Connect the four fiber optics and one CAT5 cable between the sender and receiver.
Plug the 12VDC power supplies into the DVI 1000 receiver.
You should see a beautiful picture.
* Cable Requirement - 50 or 62.5 micron multimode fiber optics cable
HOW TO CONNECT THE DVI 1000
1
2
3
4
5
4

Connect the DVI 1000 sender unit to the DVI source using the supplied cables.
Connect the DVI 1000 receiver unit to your DVI display.
Connect the four fiber optics between the sender and receiver.
Plug the 12VDC power supplies into the DVI 1000 sender.
Plug the 12VDC power supplies into the DVI 1000 receiver.
If using a DVI Detective attach it in between the computer and the sender
You should see a beautiful picture.
* Cable Requirement - 50 or 62.5 micron multimode fiber optics cable
HOW TO CONNECT THE DVI 1000 (w/o DDC)
1
2
3
4
5
6
7
The DVI 1000HD can be hooked up without using the CAT5 if DDC is not needed. A
second power supply will be required to power the receiver unit in this setup.
For computer extensions where EDID is needed, a DVI Detective can be purchased to
store the EDID of the display.
5