Gefen EXT-DVIKVM-ELR User manual

Release A8
EXT-DVIKVM-ELR
User Manual
DVI KVM
Extra Long Range Extender
Over One CAT5
*Preferred

ii
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install or place this product near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. To reduce the risk of electric shock and/or damage to this product, never handle or
touch this unit or power cord if your hands are wet or damp. Do not expose this
product to rain or moisture.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Batteries that may be included with this product and/or accessories should never be
exposed to open ame or excessive heat. Always dispose of used batteries
according to the instructions.
Important Safety Instructions

Gefen warrants the equipment it manufactures to be free from defects in material and
workmanship.
If equipment fails because of such defects and Gefen is notied within two (2) years from
the date of shipment, Gefen will, at its option, repair or replace the equipment, provided
that the equipment has not been subjected to mechanical, electrical, or other abuse or
modications. Equipment that fails under conditions other than those covered will be
repaired at the current price of parts and labor in effect at the time of repair. Such repairs
are warranted for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or tness for any particular purpose, all of
which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their original
condition.
The information in this manual has been carefully checked and is believed to be accurate.
However, Gefen assumes no responsibility for any inaccuracies that may be contained
in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. The technical information contained herein
regarding the features and specications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return Policy under
the Support section of the Gefen Web site at www.gefen.com.
iii
Warranty Information

iv
Technical Support
[phone] [phone]
8:00 AM to 5:00 PM Monday - Friday, Pacic Time
Fax
[phone]
Email
[email protected]
Web
http://www.gefen.com
Mailing Address
Gefen, LLC
c/o Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
Product Registration
Register your product here: http://www.gefen.com/kvm/Registry/Registration.jsp
iv
Contacting Gefen Technical Support

v
• Shielded CAT-5e (or better) cables should not exceed 330 feet (100 meters) between
the Sender and Receiver unit.
• This product does not support dual link resolutions.
• By default, the source device will use the EDID from the display (or other sink device)
which is connected the Receiver unit. See EDID Management (page 8) for more
information.
• If terminating network cables in the eld, please adhere to the TIA/EIA568B
specication. See the Network Cable Diagram (page 12)for details.
DVI KVM Extra Long Range Extender Over One CAT5 is a trademark of Gefen, LLC.
© 2015 Gefen, LLC. All Rights Reserved. All trademarks are the property of their respective owners.
Gefen, LLC reserves the right to make changes in the hardware, packaging, and any accompanying documentation
without prior written notice.
Operating Notes
This product uses UL listed or CE-compliant power supplies.
Pb

vi
Features and Packing List
Features
• Extends DVI and USB 2.0 up to 330 feet (100 meters)
• Supports resolutions up to 1920 x 1200 (WUXGA) and 1080p Full HD
• Extends USB 2.0 up to 330 feet (100 meters)
• Supports up to 30 Mbps of data throughput when using USB 2.0
• Backward-compatible with USB 1.1
• HDCP support (when in EDID pass-thru mode)
• EDID management for rapid integration of source and display
• Supports all Operating Systems
• Locking Power Supply connectors
• 1U tall, half rack width enclosures
• Ideal for placement on a shelf or rack mounting using the EXT-RACK-1U tray
(available separately)
Packing List
The DVI KVM Extra Long Range Extender Over One CAT5 ships with the items listed
below. The packing contents of the Sender and Receiver unit are listed below. If any of
these items are not present in the box when you rst open it, immediately contact your
dealer or Gefen.
• 1 x Gefen DVIKVM ELR - Sender unit
• 1 x Gefen DVIKVM ELR - Receiver unit
• 1 x 6 ft. Dual-link DVI cable (M-M)
• 1 x 6 ft. USB Cable (A-B)
• 2 x 5V DC Locking Power Supplies
• 2 x AC Power Cord
• 1 x Quick-Start Guide
1080P
®
®
™
™
HDCP

viii
Table of Contents
1 Getting Started
Introduction............................................................................................................ 2
Sender Unit ................................................................................................... 2
Receiver Unit................................................................................................. 4
Installation ............................................................................................................. 6
Connection Instructions................................................................................. 6
Sample Wiring Diagram ................................................................................ 7
DIP Switches......................................................................................................... 8
EDID Management........................................................................................ 8
2 Appendix
Network Cable Diagram ...................................................................................... 12
Rack Tray Installation .......................................................................................... 13
Specications ...................................................................................................... 14