Gefen Ext-hd-sl-444 User manual

Audio

Embedder

3GSDI

Release A2

User Manual

EXT-HD-SL-444

4x4Seamless Matrix

for HDMI

4x4 Seamless Matrix for HDMI

Important Safety Instructions

GENERAL SAFETY INFORMATION

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this product near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install or place this product near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specied by the manufacturer.

12. To reduce the risk of electric shock and/or damage to this product, never handle or

touch this unit or power cord if your hands are wet or damp. Do not expose this

product to rain or moisture.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally,

or has been dropped.

15. Batteries that may be included with this product and/or accessories should never be

exposed to open ame or excessive heat. Always dispose of used batteries

according to the instructions.

4x4 Seamless Matrix for HDMI

Warranty Information

Gefen warrants the equipment it manufactures to be free from defects in material and

workmanship.

If equipment fails because of such defects and Gefen is notied within two (2) years from

the date of shipment, Gefen will, at its option, repair or replace the equipment, provided

that the equipment has not been subjected to mechanical, electrical, or other abuse or

modications. Equipment that fails under conditions other than those covered will be

repaired at the current price of parts and labor in effect at the time of repair. Such repairs

are warranted for ninety (90) days from the day of reshipment to the Buyer.

This warranty is in lieu of all other warranties expressed or implied, including without

limitation, any implied warranty or merchantability or tness for any particular purpose, all of

which are expressly disclaimed.

1. Proof of sale may be required in order to claim warranty.

2. Customers outside the US are responsible for shipping charges to and from Gefen.

3. Copper cables are limited to a 30 day warranty and cables must be in their original

condition.

The information in this manual has been carefully checked and is believed to be accurate.

However, Gefen assumes no responsibility for any inaccuracies that may be contained

in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or

consequential damages resulting from any defect or omission in this manual, even if

advised of the possibility of such damages. The technical information contained herein

regarding the features and specications is subject to change without notice.

For the latest warranty coverage information, refer to the Warranty and Return Policy under

the Support section of the Gefen Web site at www.gefen.com.

PRODUCT REGISTRATION

Please register your product online by visiting the Register Product page under the

Support section of the Gefen Web site.

iii

4x4 Seamless Matrix for HDMI

Gefen, LLC

c/o Customer Service

20600 Nordhoff St.

Chatsworth, CA 91311

Telephone: (818) 772-9100

(800) 545-6900

Fax: (818) 772-9120

Email: [email protected]

Visit us on the Web: www.gefen.com

Technical Support Hours: 8:00 AM to 5:00 PM Monday - Friday, Pacic Time

4x4 Seamless Matrix for HDMI is a trademark of Gefen, LLC.

Important Notice

Gefen, LLC reserves the right to make changes in the hardware, packaging, and any

accompanying documentation without prior written notice.

HDMI, the HDMI logo, and High-Denition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing in the United States and other countries.

All trademarks are the property of their respective owners.

Contacting Gefen Technical Support

This page left intentionally blank

3GSDI Audio Embedder

Operating Notes

4x4 Seamless Matrix for HDMI

Features

• Seamless matrix scales each of its four inputs, and routes them to any or all of the

four outputs without frame loss

• Input and Output resolutions up to 1080p Full HD and 1920x1200 (WUXGA)

• HDCP compliant

• Seamless switching ensures no switching delay and no picture loss during transitions

• Ten user-congurable routing presets can be accessed via front panel push-buttons

• Controllable via front panel controls, IR, IP (web server interface, Telnet, and UDP),

and RS-232

• Easy to use on-screen Graphical User Interface (GUI)

• Handheld IR remote control and IR Extender input on back panel

• Field-upgradable rmware via web server interface

• USB port (reserved for future product enhancements)

• Locking power supply connector

• 1U tall rack-mountable enclosure, rack ears included

Packing List

The 4x4 Seamless Matrix for HDMI ships with the items listed below. If any of these items

are not present in your box when you rst open it, immediately contact your dealer or

Gefen.

• 4x4 Seamless Matrix for HDMI

• 4 x 6 ft. Locking HDMI Cables

• 1 x 6 ft. DB-9 Cable

• 1 x IR Extender Module

• 1 x IR Remote Control

• 1 x 12V DC Locking Power Supply

• 1 x Set of Rack Ears

• 1 x Quick-Start Guide

4x4 Seamless Matrix for HDMI

Features and Packing List

1080P

3GSDI Audio Embedder4x4 Seamless Matrix for HDMI

Table of Contents

viii

01 Getting Started

Panel Layout ......................................................................................................... 2

Front.............................................................................................................. 2

Back .............................................................................................................. 3

IR Remote Control Unit ......................................................................................... 4

Top ................................................................................................................ 4

Bottom........................................................................................................... 6

Battery Cover ........................................................................................................ 6

Installing the Batteries................................................................................... 7

Battery Cover ........................................................................................................ 7

Setting the IR Channel .................................................................................. 8

Installation ............................................................................................................. 9

Connecting the 4x4 Seamless Matrix for HDMI ............................................ 9

Sample Wiring Diagram ................................................................................ 9

02 Operating the 4x4 Seamless Matrix for HDMI

Introduction.......................................................................................................... 12

Standby Mode ............................................................................................. 12

Turning on the 4x4 Seamless Matrix for HDMI ........................................... 12

Routing Basics .................................................................................................... 13

Determining the Current Routing State ....................................................... 13

Routing Inputs to Outputs ........................................................................... 14

Masking / Unmasking Outputs .................................................................... 16

Saving Routing Presets............................................................................... 18

Loading Routing Presets............................................................................. 19

Locking / Unlocking the Matrix ............................................................................ 20

Using the IR Extender ......................................................................................... 22

Menu System ...................................................................................................... 23

Accessing the Menu System....................................................................... 23

Setting the Output Resolution ..................................................................... 26

Adjusting the Contrast................................................................................. 28

Adjusting the Brightness ............................................................................. 30

Adjusting the Saturation .............................................................................. 32

Adjusting the Hue........................................................................................ 34

OSD Settings .............................................................................................. 36

HDCP .......................................................................................................... 40

EDID Management...................................................................................... 42

Changing the IP Settings ............................................................................ 44

Changing the Telnet Settings...................................................................... 47

Changing the UDP Settings ........................................................................ 49

System Settings .......................................................................................... 51

4x4 Seamless Matrix for HDMI

Table of Contents

03 Advanced Operation

RS-232 and IP Conguration .............................................................................. 54

RS-232 Interface ......................................................................................... 54

RS-232 Settings .......................................................................................... 54

IP / UDP Conguration................................................................................ 55

Commands.......................................................................................................... 56

Web Interface .................................................................................................... 109

Using the built-in Web Interface ................................................................ 109

Main ► Routing ........................................................................................ 110

Main ► I/O Status..................................................................................... 114

Main ► Display Info .................................................................................. 116

I/O Setup ► Preset Names....................................................................... 117

I/O Setup ► I/O Names ............................................................................ 118

I/O Setup ► HPD Control ......................................................................... 119

I/O Setup ► HDCP ................................................................................... 120

I/O Setup ► Video .................................................................................... 122

Manage EDID ► Assign ........................................................................... 124

Manage EDID ► Bank Names ................................................................. 128

Manage EDID ► Upload / Download........................................................ 129

Network ..................................................................................................... 131

System ...................................................................................................... 135

04 Appendix

Upgrading the Firmware.................................................................................... 140

Using the Web Interface............................................................................ 140

Using the USB Interface............................................................................ 141

Specications .................................................................................................... 142