Gehaka G810 User manual
Grain moisture meter model G810
User guide
ON/OFF
Switches ON/OFF the G810. Operating with numerical
setting multiplies by 10 the indicated value
YES
Conrms function or setting selection
RIGHT-HAND ARROW
It displays the next function or increases the value of one
scale interval
LEFT-HAND ARROW
It displays the previous function or decreases the value of
one scale interval
ESCAPE (EXIT)
Exits a function or setting that is being operated at that
time. Operating with numerical setting divides by 10 the
indicated value
=========================================================== MENU G810 ================================================================
ON -+ 1. Measurement
| Performs the moisture measurement. The cereal will be selected, the weighing is made, and we will have the moisture content.
| To measure again, just pour the new sample in the hopper.
|
|
| 2. Conguration
+------+
| 2.1 Date and Time Adjustment
| Performs the Adjustment of Date and Time used in the reports. Use ARROWS and YES to perform the adjustment.
|
| 2.2 Adjusting the number of elements to be averaged
| Performs the Adjustment of the number of measurements to be used for making the average.
| We can select between 1 and 5 measurements.
|
| 2.3 Adjusting the Number of Decimal Digits
| This function makes the adjustment of the number of decimal digits shown on the display and in the moisture reports.
|
| 2.4 Adjusting the Print Mode
| Sends the print to Printer or PC. The PC report only sends data.
|
| 2.5 Adjusting the Number of Report Copies
| This function sets the number of copies of printing report.
|
| 2.6 Adjusting the Contrast
| Adjust the Contrast between 65% and 100%, and 100% is the maximum contrast.
|
| 2.7 Unlocking Chamber Door
| Left-Hand Arrow key opens the Chamber Door to perform the cleaning. Right-Hand ARROW key Locks.
|
| 2.8 Uploading Internet Equation
| Allows G810 to be remotely controlled by a PC. To exit, the power supply shall be disconnected.
|
| 2.9 Uploading Standard Equation
| Uploads equations built into the G810. All the equations will be programmed, and they may not be the most
| updated.
|
| 2.10 Self-Report
| Makes a self-diagnosis of G810, and issues a report with all data.
|
| 2.11 Language Selection
| Selects the language used by G810: Portuguese, Spanish, English, French, German and Italian.
| After select the language run the function 2.9 Uploading Standard Equations, to get the product names on the
| selected language.
+------------------------------------------------------------------------------------------------------------------------
+55 11 2165 1100
sales@gehaka.com.br
www.gehaka.com.br
www.moisturetester.com.br
Other manuals for G810
1
Table of contents
Other Gehaka Measuring Instrument manuals
