Geneinno GT exBAT-1 User manual

External Battery
with LED
User Manual
User Manual EN.
V1.0.1 2020.12
Shenzhen Geneinno Technology Co.,LTD
www.geneinno.com

GT_exBAT-1 External battery with LED is a integrated extended battery
and LED fill light dedicated equipped for intelligent underwater robots.
Connect with the unique extension interface of Geneinno Intelligent
Underwater Robot through a customized watertight connector. Can provide
4 hours of extra battery life for underwater robots. It supports multi-level
brightness sliding adjustment to provide a longer-lasting underwater
exploration experience. Built-in 4 high-brightness LED lights provide
additional 6000 lumens of lighting, making the underwater world brighter.
1. Introduction
2
2. Specification
Dimensions 472mm*φ36mm
Weight 1650g(air), 400g(water)
Maximum Depth 175m(fresh water)
LED 6000lm
In-put Voltage DC 12V
Max Electric Current 3.8A
Cycle Charge Times > 300
Working Temperature -10℃ ~ 50℃
Battery 4400mAh/97.68Wh/22.2V
Extended Duration Around 4h
Charging Time Around 6h
Interface Type Dedicated 8-core waterproof connector
Product Adaptation Intelligent underwater robot T1/T1 Pro dedicated
© 2020-2022 GENEINNO All Rights Reserved.

3. Usage Guidelines
5
© 2020-2022 吉影创新 版权所有
Installation
①Unscrew the sealing metal cover of the external interface of the
intelligent underwater robot counterclockwise，Match the slot of
battery to the slide rail in the bottom of the host,
②Slide the battery according to direction indicated .
③By the arrow and fix by screws when it in right position.
④Insert the plug of the battery into the external interface. Tighten it
clockwise.
Note: The plug has an anti-reversal insertion design, please pay attention when
inserting, please do not rotate when inserting, to avoid damage to the pin and its
internal structure.
①
③④
②
Using
⚫After battery plugged in, it will automatically provide additional power
supply, APP will automatically be identified the LED and showing the icon
on the interface, it can operate by click the icon.
Note: Please refer to “Geneinno Underwater Robot T1Pro User Manual" for APP
operation instructions

11
①Connect the special charger plug to the charger plug and the
external battery plug with LED butt tightly.
②For charging the external battery with LED, please use the
standard dedicated charger to charge.
Note: The special charger for external batteries can only charge external
batteries, and is not allowed to charge any other devices
4. Charging Guideline
© 2020-2022 GENEINNO All Rights Reserved.

11
Precautions:
⚫This product should not be directly exposed to sunlight, high
temperature, and ultra-low temperature; the above conditions will
shorten the life of the body and battery, and affect product performance.
⚫When charging, please pay attention to whether the charging interface is
dry and clean. Please make sure that there is no foreign matter attached
to the charging interface before charging.
⚫If the product appears to be in an obvious abnormal state (such as
obvious damage to the body, functional failure or missing parts, etc.),
please do not continue to use the product, and promptly contact our
after-sales or authorized dealers.
⚫Do not place heavy objects on top of this product, and do not use sharp
objects to puncture/beat/impact/squeeze, etc.
⚫Do not deliberately disassemble, damage or short-circuit this product; do
not put it in a fire, ultra-high temperature/ultra-low temperature
environment, and do not put it into flammable and explosive objects or
strong corrosive solvents and other dangerous substances.
Maintenance instructions :
⚫Please use smooth tools such as cotton cloth to clean the surface of this
product
⚫After each use of this product, please charge the battery within 24 hours.
⚫If you do not use it for a long time, please charge and discharge at least
once every 6 months.
⚫If you do not use it for a long time, please adjust the battery to 40%-60%.
Store the product in a dry and cool environment, avoid exposure to the
sun, humidity or high temperature, keep out of the reach of children.
5、Maintenance & Precautions
© 2020-2022 GENEINNO All Rights Reserved.

Shenzhen Geneinno Technology Co.,LTD
www.geneinno.com
Wechat
Official
Media
Facebook YouTube
Weibo