Genelec 9101A-B User manual

The Genelec 9101A-B Wireless Volume Control is designed for use with
Genelec F One and F Two subwoofers and the GLM Network Adaptor.
This instruction leaet covers the use with the GLM Adaptor, for use
with the F Series subwoofers please refer to the subwoofer’s operating
manual. The 9101A-B is available in white (9101AW-B) and black
(9101AM-B) colour.
Genelec 9101A-B Wireless Volume Control
VOLUME
UP
VOLUME
DOWN
GROUP
SELECT
BUTTONS
MUTE
POWER

750-9101B 1.2020
The 9101A-B uses radio frequency communication and does not need a
line of sight to the GLM adaptor. The typical maximum operating range
is 30 meters.
The 9101A-B works with the GLM adaptor after pairing:
The pairing happens during the rst 10 seconds after powering up the
GLM Adaptor. To pair the 9101A-B with a GLM Adaptor, rst press and
hold ‘+ volume up’ button and then press and hold ‘- volume down’
button on the 9101A-B. To check that the pairing has succeeded,
observe the back LEDs on the GLM Adaptor. The LEDs will start blinking
after successful pairing when you press any button on the 9101A-B. If
you do not observe this, repeat the pairing process.
When the GLM adaptor is connected to a computer running the GLM
software, the 9101A-B can adjust the audio output volume level, select
between loudspeaker groups, turn the system on and o and mute
the system. When using the GLM adaptor in standalone mode with an
USB power supply and no computer, the 9101A-B does not change
loudspeaker groups. All other functions listed above work. For the
standalone use the acoustic settings can be stored to the monitors and
they are loaded when monitors turn ON.