P.O. Box 3547 / Johnson City, TN 37602 / 1-800-414-4661 / www.GeneralShale.com
Step
1Create a level base using concrete or gravel to accommodate the 3'-4' square foot
print of the re pit.
(Base Section View)
Prepare an area 4'wide x 4'deep.
Remove sod and vegetation.
Excavate/remove so soil as required to provide level stone surface at a
minimum of 4"deep.
If soil under sod is hard, soil can be leveled out and used as a base material.
NOTE: All outdoor living kits can be installed directly on a properly prepared stone base. However, for best performance and appearance,
a concrete pad is recommended.
Reference diagrams for creating a level base.
Undisturbed Ground
Existing Ground Screed Stone Base Level
4"
4"min. Crusher Run Stone
4'
If required, use landscape blocks to retain stone base.
If installing optional hearth/knee wall, extend base as required.
4'
FIRE PIT FRONT
Fire Pit Outline
3'4"x 3'4"
(Base Plan View)
4'x 4'
Crusher Run Base
(4" min. thickness)
3
“Gathering” Fire Pit (FPS-75) Assembly Instructions
OUTDOOR LIVING PRODUCTS
