Genie HDMID04 User manual

Quick Start Guide
Please read these instructions carefully before operating the unit
and keep for further reference. All the examples and pictures used
here are for reference only. The contents of this manual are subject
to change without notice.
1 Input, 4 Output HDMI
Distribution Amplifier
HDMID04

Quick Start Guide 1 Input, 4 Output HDMI Distribution Amplifier
2
The Genie HDMID04 is a 1 × 4 HDMI splitter that supports resolution up to 4K @
60Hz 4:4:4 and can distribute one HDMI source to 4 HDMI displays. The splitter also
supports EDID that can easily work with any display with different resolution.
Features
• Splits 1 HDMI into 4 HDMI signals
• Resolution up to 4K @ 60Hz 4:4:4
• Supports EDID management
Specifications
Dimensions
Supports
Compliance HDMI 2.0, HDCP 1.4, 2.2, DVI 1.0
Maximum Video Resolution 4K @ 60Hz 4:4:4
Audio Format LPCM 7.1, Dolby TrueHD, DTS-HD Master Audio
Ports &
Interfaces
Video Input 1 x HDMI Type A
Video Output 4 x HDMI Type A
EDID Selector 1 × 4 Pin DIP Switch
RS232 Interface (Console) 1 x DB9 Female (Firmware Update)
Others
Power Connector DC 5V 2A
Power Supply 1A (Max.)
Temperature
Operation: 0 to 60°C
Storage: -20 to 85°C
Humidity: Up to 85%
Dimensions 167 × 102 × 40 mm
Weight 455g
167mm
102mm
40mm
12 34

Quick Start Guide 1 Input, 4 Output HDMI Distribution Amplifier
3
Application
Panel View
LED Indication
POWER Green on: Power on
INPUT Blue on: HDMI Input connected
OUTPUT1 Blue on: HDMI output 1 connected
OUTPUT2 Blue on: HDMI output 2 connected
OUTPUT3 Blue on: HDMI output 3 connected
OUTPUT4 Blue on: HDMI output 4 connected

Quick Start Guide 1 Input, 4 Output HDMI Distribution Amplifier
4
DIP Switch Instruction
DIP Switch 1~4 OFF: Default as EDID 1080P
• Switch ON 1: Output 1 as EDID source.
• Switch ON 2: Output 2 as EDID source.
• Switch ON 3: Output 3 as EDID source.
• Switch ON 4: Output 4 as EDID source.
• Over 1 DIP switches ON: EDID analysis and re-generate a set of EDID for all screen
resolution.
Examples: Output 1,2 are different resolution screen, move the DIP switch 1, 2 at ON
position and press “ EDID COPY” button, then re-generate a new a set of EDID to support
both two monitors screen resolution.
EDID COPY Button Instruction
Press “EDID COPY” button, start to learning and writing EDID.
Remark Over 2 port EDID learning, audio will only support two channel audio.
Console Port
R232 interface connect to PC for firmware updated

Sales [phone]
Enquiries [email protected]o.uk
Website www.genieproducts.co.uk