Genie IP4GESP2 User manual
User Manual
Please read these instructions carefully before operating the unit
and keep for further reference. All the examples and pictures used
here are for reference only. The contents of this manual are subject
to change without notice.
4 Port Gigabit AI PoE Switch
IP4GESP2
User Manual 4 Port Gigabit AI PoE Switch
2
Features
• AI Extend: 1–4 ports support 250m long distance power supply (cat5e or cat6
cable)
• AI VLAN: Isolating ports 1–4 to each other can effectively suppress network
storms and improve network performance
• AI QoS: Prioritise the identified video data to make video transmission
smoother
• Supports IEEE802.3af/at standard PD device
• With power circuit protection, it can protect the security of the back-end
equipment
• AI PoE: Automatically detect the power receiving port, find the dead device,
power off and restart the device
• Supports wireless access points (APs) and network surveillance cameras via
cat5 cables
• Supports uplink port auto-flip (Auto MDI/MDIX)
• Adopt store-and-forward exchange mechanism
• Intelligent power supply, lowest power consumption, ensure the power
demand of the PD terminal
• Support port no link power saving function
• Zero configuration feature power is automatically supplied to the adaptive
• device
• No fan design to achieve energy saving and environmental protection
Specifications
Network Port 4 10/100/1000Mbps PoE RJ45 port (Port 1~ Port 4)
2 10/100/1000Mbps RJ45 Port Uplink (Port 5~Port 6)
Transfer Rate 1000Mbps full Duplex
Network Protocol and
Standard
IEEE 802.3i, IEEE 802.3u,IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE802.3ab
Performance Bandwidth: 12Gbps (no block)
Frame filtering and transmission rate
10M port maximum 14,800pps
100M port maximum 148,800pps
1000M port maximum 1,488,000pps
LED Indicator Power, Resv, Link / Act
PoE Pin 1/2(+), 3/6(-)
Power Max power for single port 30W, External power adapter 60W
Environment Operating Temperature: 0°~40°C
Operating Humidity: 10%~ 90% (Non-condensing)
Dimensions 125 × 75 × 27 mm
Weight 0.5 Kg
User Manual 4 Port Gigabit AI PoE Switch
3
Installation Diagram
* The diagram above is just for reference only.
Indicator Status
Indicator Indicator
Description
Normal Status Abnormal Status
PWR Indicator Power Indicator Yellow light
on
If the light is not on, Please check external socket
power supply if it is normal/adapter power
connection if is correct or not etc.
LINK/ACT
Indicator
PD device
connection
indication
Green light on If the light is not on. Please check the corresponding
RJ45 port if connected network devices, PoE power
normal, cable connected correctly, cable damaged,
network devices destroyed or not etc.
User Manual 4 Port Gigabit AI PoE Switch
4
Caution
1. For safety, please don’t open the casing of the product.
2. Please be careful with the risk of a strong current and security protection when
the product is carrying power.
3. Please select the right power adaptor provided for the PoE switch before using
and confirm if it is in accord with the requirements of the PoE switch.
4. Please don’t use PoE switch in humid environments and avoid water entering
the product as this can cause the PoE switch to breakdown.
5. Please start the power after the circuit is connected.
6. Please don’t plug-in and plug-out the connection cable when product is
carrying power.
7. Please don’t use PoE switch under somewhere with dust and EME.
8. Please don’t put heavy things on top of the PoE switch.
9. According to the IEEE802.3AF/AT standard, please use the Cat 5 or above
transmission distance 250m
10. Please don’t exceed the maximum output power of the PoE switch when it
connects more than one PD device.
11. We suggest that the PoE switch is used for indoors, if you want to use for
outdoors, please install water resistant box.
Table of contents
Other Genie Switch manuals
