Genie HDUB16RP User manual
Quick Start Guide
Please read these instructions carefully before operating the unit
and keep for further reference. All the examples and pictures used
here are for reference only. The contents of this manual are subject
to change without notice.
AHD, CVI and TVI 16 Channel
Passive Video Balun - Rack
Mountable
HDUB16RP
Quick Start Guide AHD, CVI and TVI 16 Channel Passive Video Balun - Rack Mountable
2
The Genie HDUB16RP is a 16 channel passive HD (non-amplified) video UTP
transceiver allows transmission of real time and high performance colour or
B&W CCTV video or AHD, CVI, TVI video over UTP cable. The device is 1U rack-
mountable, perfect for multi-point surveillance.
Features
• Passive, no need of power supply
• AHD, CVI, TVI and CVBS 4-in-1 compatible design
• Real-time transmission, no delay
• RJ45 or green terminal block to be chosen to connect UTP cable
• Compact ID design, 1U(19) rack mountable
• Plug and play, simple installation
• Super surge protection and interference rejection
Specifications
Function
Channels 16 Channel
Transmission Distance CVI (720p): 370m, CVI (1080p): 100m
TVI (720P/1080p): 200m
AHD-L/M (720p/960p): 330m
AHD-H (1080p): 330m
Analogue Video: 500m
Video
Properties
Video Connector BNC-F
UTP Cable Connector 8 pin green terminal block, RJ-45
Compatible With PAL, NTSC, SECAM video, AHD, CVI, TVI HD video
Signal Transmission Band 0–70MHz
Interference Rejection >60db
Video Connector Protection 2KV (Common mode), Per: IEC61000–4–5
UTP Cable Connector
Protection 2KV (Different mode), Per: IEC61000–4–5
Protection ESD Protection
Contact Discharge: 6000V Air
Discharge: 8000V
Per:IEC61000–4–2
Others
Outer Shell Iron Metal
Colour Black
Operation Temperature 0°C-50°C
Storage Temperature -40°C-85°C
Relative Humidity 0%-95% (Non-condensing)
Dimensions 430 × 100 × 44.5 mm (1U)
Net Weight 1.181kg
Quick Start Guide AHD, CVI and TVI 16 Channel Passive Video Balun - Rack Mountable
3
Panel Diagram & Dimensions
Installation Steps
Please check the following items before installation.
If anything is missing, please contact dealer.
• 1x HDUB16RP
• 1x Accessory Set
• 1x User Manual
Please follow the steps as below:
1. Please power off camera,PC, DVR, IPC and monitor which are to be used.
2. Connect cameras with transmitter via BNC cable.
3. Connect DVR with it via BNC cable.
4. Connect transmitter and receiver via UTP cable.
5. Power camera, DVR, monitor etc.
Troubleshoot
Please find the following solution when the device doesn’t work:
• Check if it’s according to the manual.
• If choose RJ-45,make sure both ends of UTP cable are same (both 568A or both
568B).
• If choose green terminal block,make sure cable of same colour be in the same
pin.
• Check all connection(like BNC,RJ-45).
• Make sure the real distance not exceeds the allowed transmission distance.
• Make sure the cables are quality.
• Replace the device at question by a normal working device.
• If the problem still exists, please contact your distributor.
44.5mm
430mm
1
1
3
3
1
1
3
3
91011 12
13 14 15 16
9
9
1
1
0
0
1
1
1
1
1
1
2
2
1
1
3
3
1
1
4
4
1
1
5
5
1
1
6
6
124
12345678
3
568
12345678
7
910 12
12345678
11
13 14 16
12345678
15
1
1
3
3
1
1
3
3
1
1
3
3
2
2
Quick Start Guide AHD, CVI and TVI 16 Channel Passive Video Balun - Rack Mountable
4
Application
Note:
Transmission distance is related to wire quality, please use standard UTP cable and
coaxial cable.
RJ45 connector and screw push terminal connection mode can not use at the same
time, choose only one of them.
Recommended Distance
Note:
The test data in table 1 is required under lab environment by passive to passive,In
actual case, there maybe some differences due to different cable and environment.
Monitor
DVR
Coaxial Cable
UTP Cat5e/6 Cable
Single Channel Passive Transceiver
HDUB16RP
Monitor
Monitor
Camera
Table of contents
Other Genie Transceiver manuals
