George & Willy FELT BOARD User manual

FELT BOARD
Thank you for choosing the Felt Board. Designed with a
focus on longevity and quality, the Felt Board is the perfect
way to display your menu or message in your cafe, home or
office.
It can be hung either landscape or portrait, and messages
can be written using the letters provided. The felt board is
also compatible with pins* to allow you to display images or
notes.
*pins are not included
Enjoy.

CARE GUIDE
Where you install your product depends on its material/s.
Wooden and Steel Products: We recommend using these
products inside or under a shelter where they are protected
from any exposure to rain or water.
Aluminum Products: These products are non-corrosive and
suitable for use outside.
Chalk Products: You should use traditional dry chalk. We
don't recommend using liquid chalk pens on our products.
Transportable Outdoor Signage: If there is exposure to wind,
we recommend bringing signage inside to protect it from the
extremes. We offer Sandbags to help support your product in
moderate wind conditions.
Felt Boards: We recommend using these products inside.
Wipe down with a damp clost to remove any dust.

COMPONENTS
1 x Felt Board
1 x Large Letter & Numeral Pack
1 x Small Letter & Numeral Pack
6 x Screws

Choose a configuration for your Felt Board.
Depending on your space, the board can be installed either
portrait or landscape. To correctly install your
board, we recommend using a qualified builder.
1

Fix the Felt Board to the wall with the screws provided. The
board should be fixed into studs or a solid wall. We
recommend using a level to ensure it is straight.
2

If you have a larger menu or message, joining multiple Felt
Boards side by side, stacked above each other, or both
(pictured above) can be very effective.
3

Slot the letters into the holes on the board to write your
display. You can also use push pins on the felt board to
display images or notes - get creative!
4
BURGERS

DISCLAIMER
George & Willy products have a lifetime warranty. This covers
faulty workmanship and/or materials when the product is
used in normal, domestic, or commercial conditions and
following the care and use instructions provided.
It does not cover normal wear and tear, accidents, or misuse
of the product. We recommend using a qualified builder to
complete the installation to reduce the risk of damage or
injury. If the defect was caused by a manufacturing fault, the
faulty product will be replaced free of charge. If the original
product is no longer in production, it will be replaced with
the most similar product.
Please keep all parts out of reach of small children as they
may pose a choking risk.

CONTACT US
[e-mail]
www.georgeandwilly.com
@georgeandwilly
www.pinterest.com/georgeandwilly/