GeoVision GV-LPR1200 User manual

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
User's Manual
GV-IP LPR Camera
IPLPRCAM-B
GV-LPR1200
GV-LPC1200
GV-LPC1100
GV-IP LPR Cam 5R

© 2015 GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part,
without the written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is
accurate. GeoVision, Inc. makes no expressed or implied warranty of any kind
and assumes no responsibility for errors or omissions. No liability is assumed
for incidental or consequential damages arising from the use of the information
or products contained herein. Features and specifications are subject to
change without notice.
Note: No memory card slot or local storage function for Argentina.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: [phone]
Fax: [phone]
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV
series products are trademarks of GeoVision, Inc. Windows and Windows XP
are registered trademarks of Microsoft Corporation.
October 2015

i
Preface
Welcome to the GV-IP LPR Camera User’s Manual.
The GV-IP LPR Camera has a series of models designed to meet different needs. This
manual is designed for the following models and firmware versions:
Models Firmware Version
GV-IP LPR Camera 5R 1.01
GV-LPC1100 1.01
GV-LPC1200 1.0
GV-LPR1200 1.01
Note: GV-LPC1100 is also referred to as GV-IP LPR Camera 10R.
IMPORTANT: When using GV-LPC1200 / GV-LPR1200 for the first time, you need to
remove the plastic insulation film under the battery and change the silica gel bag. For
details, see 1.3.6 Replacing the Silica Gel Bag and 1.3.7 Fitting the Battery.

ii
Contents
Naming Definition.....................................................................................................vi
Options......................................................................................................................vi
Note for Connecting to GV-System / GV-VMS .......................................................vii
Note for Installing Camera Outdoor ......................................................................viii
Chapter 1 Introduction........................................................................................... 1
1.1 GV-IP LPR Camera 5R.............................................................................................1
1.1.1 Features..................................................................................................... 2
1.1.2 System Requirements ................................................................................ 3
1.1.3 Packing List................................................................................................ 4
1.1.4 Device Installation ...................................................................................... 5
1.1.5 Connecting the Camera.............................................................................. 6
1.1.6 Adjusting the Angles................................................................................... 7
1.1.7 Replacing the Silica Gel Bag .....................................................................10
1.1.8 Installing the Sun-Shield Cover .................................................................11
1.2 GV-LPC1100...........................................................................................................12
1.2.1 Features....................................................................................................13
1.2.2 System Requirements ...............................................................................14
1.2.3 Packing List...............................................................................................15
1.2.4 Device Installation .....................................................................................16
1.2.5 Connecting the Camera.............................................................................18
1.2.6 Replacing the Silica Gel Bag .....................................................................21
1.3 GV-LPC1200 / LPR1200.........................................................................................23
1.3.1 Features....................................................................................................24
1.3.2 System Requirements ...............................................................................25
1.3.3 Packing List...............................................................................................26
1.3.4 Installing the Camera ................................................................................27
1.3.5 Connecting the Camera.............................................................................29
1.3.6 Replacing the Silica Gel Bag .....................................................................31
1.3.7 Fitting the Battery ......................................................................................32
1.3.8 Installing a Mini USB Cable .......................................................................33
Chapter 2 Getting Started.................................................................................... 36
2.1 Looking Up the IP Address .....................................................................................36
2.2 Changing the IP Address ........................................................................................38
2.2 Configuring the Basics............................................................................................39

iii
Chapter 3 Accessing the Camera....................................................................... 40
3.1 Accessing Your Surveillance Images ......................................................................40
3.2 The Live View Window ...........................................................................................41
3.3 The Control Panel of the Live View Window ...........................................................43
3.4 Snapshot of a Live Video ........................................................................................46
3.5 Video Recording .....................................................................................................46
3.6 Picture-in-Picture and Picture-and-Picture View .....................................................47
3.7 Alarm Notification ...................................................................................................49
3.8 Video and Audio Configuration ...............................................................................50
3.9 Remote Configuration.............................................................................................51
3.10 Camera Name Display..........................................................................................51
3.11 Image Enhancement.............................................................................................51
3.12 I/O Control ............................................................................................................52
3.13 Visual Automation.................................................................................................53
Chapter 4 Administrator Mode............................................................................ 54
4.1 Video & Motion .......................................................................................................56
4.1.1 Video Settings ...........................................................................................57
4.1.2 Motion Detection / Detection Mode............................................................62
4.1.3 Privacy Mask.............................................................................................68
4.1.4 Text Overlay ..............................................................................................69
4.1.5 Visual Automation......................................................................................70
4.1.6 Recognition Engine Settings .....................................................................71
4.2 I/O Control ..............................................................................................................75
4.2.1 Input Settings ............................................................................................75
4.2.2 Output Settings .........................................................................................76
4.2.3 RS485.......................................................................................................78
4.3 Events & Alerts .......................................................................................................79
4.3.1 E-mail........................................................................................................80
4.3.2 FTP ...........................................................................................................82
4.3.3 Center V2..................................................................................................84
4.3.4 VSM (Vital Sign Monitor) ...........................................................................86
4.3.5 GV-Video Gateway / GV-Recording Server ...............................................88
4.3.6 RTSP ........................................................................................................90
4.3.7 ONVIF.......................................................................................................91
4.3.8 POS ..........................................................................................................92
4.3.9 Inquire Recognized Database ...................................................................94

iv
4.3.10 Registry Database...................................................................................95
4.4 Monitoring...............................................................................................................97
4.4.1 Monitoring Settings..................................................................................97
4.5 Schedule ................................................................................................................98
4.5.1 I/O Monitoring Settings..............................................................................98
4.5.2 Recognizing Schedule Settings.................................................................99
4.6 Network ................................................................................................................100
4.6.1 LAN Configuration...................................................................................100
4.6.2 Advanced TCP/IP....................................................................................102
4.6.3 UMTS......................................................................................................106
4.6.4 IP Filtering ...............................................................................................108
4.6.5 SNMP Settings........................................................................................109
4.7 Management ........................................................................................................ 111
4.7.1 Date and Time Settings ........................................................................... 111
4.7.2 Storage Settings......................................................................................113
4.7.3 User Account...........................................................................................115
4.7.4 Log Information .......................................................................................116
4.7.5 Tools........................................................................................................117
4.7.6 Language ................................................................................................119
Chapter 5 Advanced Applications .................................................................... 120
5.1 Upgrading System Firmware ................................................................................120
5.1.1 Using the Web Interface ..........................................................................121
5.1.2 Using the GV-IP Device Utility .................................................................122
5.2 Backing Up and Restoring Settings ......................................................................125
5.3 Restoring to Factory Default Settings ...................................................................127
5.3.1 Using the Web Interface ..........................................................................127
5.3.2 Directly on the Camera............................................................................127
5.4 Verifying Watermark .............................................................................................128
5.4.1 Accessing AVI Files .................................................................................128
5.4.2 Running Watermark Proof .......................................................................128
5.4.3 The Watermark Proof Window.................................................................129
Chapter 6 DVR Configurations ......................................................................... 130
6.1 Setting Up IP Cameras on GV-System .................................................................131
6.1.1 Customizing Camera Settings .................................................................134
6.2 Setting Up IP Cameras on GV-VMS .....................................................................136
6.3 Remote Monitoring with Multi View .......................................................................139

v
6.4 Remote Monitoring with E-Map.............................................................................141
Chapter 7 CMS Configurations ......................................................................... 143
7.1 Center V2 .............................................................................................................143
7.2 Vital Sign Monitor..................................................................................................145
7.3 Dispatch Server ....................................................................................................146
Chapter 8 Smart Device Connection ................................................................ 147
Chapter 9 GV-ASManager Connection............................................................. 148
Specifications ....................................................................................................... 151
GV-IP LPR Camera 5R .................................................................................................151
GV-LPC1100 .................................................................................................................154
GV-LPC1200 / LPR1200 ...............................................................................................158
Appendix ............................................................................................................... 162
A. The CGI Command...................................................................................................162
B. RTSP Protocol Support.............................................................................................163
C. Settings for Internet Explorer 8 or later .....................................................................164
D. Supported UMTS Protocol (3G Modem) ...................................................................165

vi
Naming Definition
GV-System
GeoVision Analog and Digital Video Recording Software. The
GV-System also refers to Multicam System, GV-NVR System,
GV-DVR System and GV-Hybrid DVR System at the same
time.
GV-VMS GeoVision Video Management System for IP cameras.
GV-DVR LPR
GeoVision License Plate Recognition System for GV-IP LPR
cameras. It consists of the GV-System, the LPR Plugin and a
GV-LPR Capture Dongle installed on a computer.
Options
Optional devices can expand your camera’s capabilities and versatility. Contact your dealer
for more information.
Device Description
GV-PA191 PoE
Adapter
The GV-PA191 PoE adapter is designed to provide power and network
connection to the cameras over a single Ethernet cable. The GV-PA191
PoE adapter is only available for GV-IP LPR Camera 5R.
GV-PA482 PoE
Adapter
The GV-PA 482 PoE adapter is designed to provide power and network
connection to the cameras over a single Ethernet cable. The GV-PA482
PoE adapter is only available for GV-LPC1100.
GV-PoE Switch The GV-POE Switch can be used for data transmission only. It does not
provide power to GV-IP LPR cameras.

vii
Note for Connecting to GV-System / GV-VMS
The GV-IP LPR Camera is designed to work with and record on GV-System / GV-VMS, a
video management system.
Once the camera is connected to the GV-System / GV-VMS, the resolution set on the
GV-System / GV-VMS will override the resolution set on the camera’s Web interface. You can
only change the resolution settings through the Web interface when the connection to the
GV-System / GV-VMS is interrupted.

viii
Note for Installing Camera Outdoor
When installing the GV-IP LPR Camera outdoor, mind the following:
1. Set the camera above the junction box to prevent water from entering the camera along
the cables.
2. Waterproof the PoE, power and TV-out cables with waterproof silicon rubber or the like.
3. To prevent the lens from fogging up, replace the silica gel bag every time you open the
camera, and conceal the gel bag in camera within 2 minutes of exposing to open air. The
silica gel bag loses it effectiveness when the dry camera is opened.
4. The camera casing can be hot due to its IR LED. Make sure you unplug the power cable
and allow the camera casing to cool down before handling the camera.

Introduction
1
Chapter 1 Introduction
1.1 GV-IP LPR Camera 5R
Ideal for parking lot installation, the GV-IP LPR Camera 5R is a 1.3 MP B/W network camera
designed for recognition of reflective license plates on vehicles traveling at 60 km/h (37 mph)
or less. With its multiple LEDs and intelligent IR, the camera is able to automatically adjust its
shutter speed to the scene and produce clear license plate capture under low-light conditions.
The motorized varifocal lens take the advantage of its motorized focus / zoom in that the user
can remotely adjust the focus and zoom through the Web interface. It is weather proof (IP67)
and also able to work in environments with temperatures ranging from -20°C (-4°F) to 50°C
(122°F).
The GV-IP LPR Camera 5R can be easily configured through its Web interface and you can
record and play back recordings using the free GV-NVR software included in the standard
package.
1

1.1.1 Features
˙ 1.3 megapixel B/W progressive scan CMOS
˙ Motorized varifocal lens for remote focus / zoom adjustment
˙ Dual streams from MJPEG or H.264
˙ Up to 30 fps at 1280 x 1024
˙ Maximum speed 60 km/h (37 mph)
˙ Recognition for reflective license plate only
˙ Ingress protection (IP67)
˙ Vandal resistance (IK10)
˙ Maximum IR distance 5 M (16.4 ft)
˙ Built-in fan
˙ Defog
˙ Motion detection
˙ Privacy mask
˙ Text overlay
˙ IP address filtering
˙ Power supplied through PoE (PoE+, IEEE 802.3 at)
˙ Support for iPhone, iPad, Android and 3GPP
˙ ONVIF (Profile S) conformant
˙ 30 languages on Web interface
2

Introduction
1
1.1.2 System Requirements
To access the camera functions and settings through Web browser, ensure your PC is in good
network connection and use one of the following Web browsers:
 Microsoft Internet Explorer 7.x or later
 Google Chrome
 Mozilla Firefox
 Safari
Note:
1. For users of Internet Explorer 8 or later, additional settings are required. For details,
see Appendix C.
2. With non-IE browsers,
A. Motion Detection, Text Overlay and two-way audio are not supported.
B. The Play function is only available on the live view window (Figure 3-2).
C. RTSP streaming must be kept as enabled. For more details, see 4.3.6 RTSP.
Compatible Software Version
Model Firmware Version GV-System Version GV-VMS GV-ASManager
V1.00 V8.5.8.0 N/A V4.2 GV-IR LPR
Camera 5R V1.01 V8.5.9.0 or later V14.10 or
later
V4.22 or later
Note: The License Plate Recognition function is not supported on GV-VMS.
3

1.1.3 Packing List
˙ GV-IP LPR Camera 5R
˙ Self Tapping Screw x 3
˙ Plastic Screw Anchor x 3
˙ Torx Wrench x 2
˙ Sun-Shield Cover Kit (1 Sun-Shield Cover, 2 Philips Head Screws,
2 Plastic Screw Spacers and 2 Hexagon Screws included)
˙ Silica Gel Bag x 1
˙ GV-IP LPR Camera Software CD
˙ GV-NVR Software DVD
˙ GV-ASManager Software DVD
˙ Warranty Card
4

Introduction
1
1.1.4 Device Installation
1.1.4.1 Installation Guidelines
To produce quality image and to avoid software recognition errors, make sure you adhere to the
guidelines when installing your GV-IP LPR Camera 5R. See GV-LPR Camera Installation Guide.
1.1.4.2 Installing the Camera
After you have read through the installation guides and chosen an installation site, follow the
steps below to install the GV-IP LPR Camera 5R.
1. Mark the installation site and drill three holes for screw anchors.
2. Insert the supplied screw anchors.
3. Secure the camera to the wall using the supplied screws.
Figure 1-1
4. Remove the protection sticker from the camera’s cover.
5. Connect the camera to the network and supply power via the PoE cable. See 1.1.5
Connecting the Camera.
6. Access the live view. See Getting Started, Chapter 2.
7. Based on the live view, adjust the angle, zoom and focus of the camera of the camera. For
adjusting three shafts, see 1.1.6 Adjusting the Angles.
For changing zoom and focus, see
Figure 3-4 in 3.3 The Control Panel of the Live View Window.
8. Install the sun-shield cover to the camera. For details, see 1.1.8 Installing the Sun-Shield Cover.
5

1.1.5 Connecting the Camera
It is suggested to use GV-PA191 PoE Adapter to connect the GV-IP LPR Camera 5R to the
network. Follow the steps below for connection.
1. Connect the camera’s cable to the GV-PA191 PoE Adapter as illustrated below. The
power and network will be supplied simultaneously.
PoE
GV-IP LPR Camera 5R
Rear Panel
Power
LAN 10/100 Power IN
Hub/Router
Ethernet
Cable
(-)(+) GV-PA191 PoE Adapter
Figure1-2
2. When the Power LED on the front panel of the GV-PA191 PoE Adapter turns green, you
are ready to access the live view, adjust the image clarity and configure the basics. See
Getting Started, Chapter 2.
Note: The GV-PA191 PoE Adapter (AC Power Adapter included) can be purchased upon
request.
6

Introduction
1
1.1.6 Adjusting the Angles
The GV-IP LPR Camera 5R is designed to be adjustable in three shafts for easy and flexible
installation.
First Shaft
You can adjust the camera body by 360 degrees to the right or the left.
1. Unscrew the panning lock screw with the torx wrench.
Torx Wrench
Panning Lock Screw
Figure 1-3
2. Adjust the angle of camera body to the right or the left, and fasten the panning lock screw.
0 ~ 360°
Figure 1-4
7

Second Shaft
You can adjust the camera body up and down by 90, 112.5, 135, 157.5 or 180 degrees by
using the gears inside the camera body and the camera base.
1. Unscrew the tilting lock screw with the torx wrench.
Torx Wrench
Tilting Lock Screw
Figure 1-5
2. Hold the camera body, and move the camera base to the right to separate the camera
gears.
Camera Gears
Move the Camera
Base to the Right
Camera Body
Figure 1-6
3. Adjust the angle of camera body to 90°, 112.5°, 135°, 157.5° or 180°. Then move the
camera base to the left to combine the gears.
90°
112.5°
180
°
157.5°
135 °
Figure 1-7
4. Fasten the tilting lock screw.
8

Introduction
1
Third Shaft
You can adjust the camera base by 360°.
1. Unscrew the base fixing screw with the torx wrench.
Base Fixing Screw
Torx Wrench
Figure 1-8
2. Adjust the angle of camera base, and fasten the base fixing screw.
0~360°
Figure 1-9
9

1.1.7 Replacing the Silica Gel Bag
To replace the original silica gel bag with a new one, follow the steps below.
1. Loosen the camera’s cover.
Camera’s Cover
Figure 1-10
2. Remove the silica gel bag.
Silica Gel Bag
Figure 1-11
3. Insert a new silica gel bag to the camera module and fasten the camera’s cover within 2
minutes of opening the silica gel bag package.
IMPORTANT:
1. The silica gel loses its effectiveness when the dry camera is opened. To prevent the lens
from fogging up, replace the silica gel bag every time when you open the camera and
conceal the gel bag in the camera within two minutes of exposing to the open air.
2. For each newly replaced silica gel bag, allow it to absorb moisture for at least 5 hours
before operating the camera.
10