GeoVision ICH264TG2V10 User manual

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Pinhole Camera
ICH264TG2V10
Hardware Manual
GV-IPCam H.264

© 2015 GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in
part, without the written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is
accurate. GeoVision, Inc. makes no expressed or implied warranty of any
kind and assumes no responsibility for errors or omissions. No liability is
assumed for incidental or consequential damages arising from the use of
the information or products contained herein. Features and specifications
are subject to change without notice. Note: no memory card slot or local
storage function for Argentina.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: [phone]
Fax: [phone]
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV
series products are trademarks of GeoVision, Inc. Windows and Windows
XP are registered trademarks of Microsoft Corporation.
September 2015

Contents
Contents ..............................................................................i
Options ...............................................................................ii
Chapter 1. Pinhole Camera..............................................1
1.1 Packing List..............................................................................2
1.2 Features...................................................................................3
1.3 Overview ..................................................................................4
6
10
11
1.4 Installation................................................................................
1.5 Connecting the Camera..........................................................
1.6 Loading Factory Default..........................................................
i

ii
Options
Optional devices can expand your camera’s capabilities and versatility.
Contact your dealer for more information.
Device Description
GV-PA191 PoE
Adapter
The GV-PA191 PoE adapter is designed to provide
power and network connection to the cameras
over a single Ethernet cable.
GV-POE Switch
The GV-POE Switch is designed to provide power
along with network connection for IP devices. The
GV-POE Switch is available in various models with
different numbers and types of ports.
10 m (32.8 ft) RJ-
12 Cable A 10 m (32.8 ft) RJ-12 Cable can be purchased to connect the camera lens and the main body.

Pinhole Camera
1
Chapter 1. Pinhole Camera
The Pinhole Camera consists of a main body for processing and a
separate camera lens for capturing images. The compact camera lens can
be installed in surveillance sites with limited space such as behind the
panel of an ATM machine. The Pinhole Camera is also ideal for locations
where discreet surveillance is desirable, such as at the banks, hotels,
museums, stores, and offices.
Model No. Specification Description
GV-UNP2500 Fixed
Lens
Fixed Iris, f:3.7 mm,
F/2.8, 1/2.7” M12
mount
2 MP Super Low
Lux, H.264, D/N,
Pinhole Camera
1

1.1 Packing List
Pinhole Camera 1 m (3.28 ft) RJ-12 Cable
Camera Adhesive Tape x 2
Installation Sticker
Main Body Mount
Main Body Adhesive Tape
M3 Screw x 2
M2 Screw
GV-IPCAM H.264 Software
DVD GV-NVR Software DVD
Warranty Card
2

Pinhole Camera
1
1.2 Features
1/2.8" progressive scan super low lux CMOS
Dual streams from H.264 or MJPEG
Up to 30 fps at 1920 x 1080
Megapixel lens
Day and night function (electronic)
Micro SD card slot (SD/SDHC) for local storage
NAS recording
Recording assigned by GV-Edge Recording Manager (Windows &
Mac)
One-way audio
3D DNR (Digital Noise Reduction)
Wide Dynamic Range (WDR)
Defog
Motion detection
Tampering alarm
Visual automation
Text overlay
Privacy mask
IP address filtering
PoE (IEEE 802.3af)
Support for iPhone, iPad, Android and 3GPP
31 languages on Web interface
ONVIF (Profile S) conformant
3

1.3 Overview
Camera Lens
1
2
3
4
Main Body
6
7
89
4
5
Figure 1-1
No. Name Description
1 Lens Receives images.
2 Microphone Receives sounds.
3 Lens Screw Loosens to adjust the camera lens.
4 RJ12 Port Use the supplied RJ12 cable to connect the
camera lens and main body.
4

Pinhole Camera
1
No. Name Description
5 RJ12 Status
LED Turns on (green) when the camera lens and main body are connected.
6 PoE Connects to a PoE adapter.
7 Status LED Turns on (green) when the system is ready.
8 Memory Card
Slot Inserts a micro SD card (SD/SDHC, version 2.0, Class 10) to store recording data.
9 Default Button Restores the camera to factory default. For
details, see 1.6 Loading Factory Default.
5

1.4 Installation
The Pinhole Camera is designed for indoors. You can install the camera
lens behind a wall or the ceiling board. Note that the thickness of the wall
or ceiling board must be under 4 mm.
Figure 1-2
1. Paste the installation sticker on the ceiling or the wall where you want
to install the camera lens.
2. Drill a hole 9 mm in diameter. Be sure to remove the sticker after you
finish drilling.
Figure 1-3
6

Pinhole Camera
1
3. Paste one of the supplied camera adhesive tapes onto the camera
lens.
Figure 1-4
4. Remove the backing paper on the other side of the adhesive tape and
attach the camera lens onto the wall or ceiling. The arrows on the
camera lens point toward the top of the camera view.
Figure 1-5
7

5. Loosen the lens screw and adjust the position of the lens so that the
metal ring is pressing against the wall or ceiling.
Metal ring
Lens screw
Figure 1-6
6. Place the main body mount where you want to install it, and secure
the mount using one of the methods below.
Insert and tighten the two supplied M3 screws.
Figure 1-7
Paste the main body adhesive tape on the bottom side of the
main body mount.
Figure 1-8
8

Pinhole Camera
1
7. Align the main body with the mount as shown below and secure with
the supplied M2 screw.
Figure 1-9
8. Connect the camera lens and the main body using the RJ-12 cable.
9. Connect the main body to the network and supply power via the PoE
cable. See 1.4 Connecting the Camera.
10. Access the live view. See 2.1 Accessing the Live View, GV-IPCam
H.264 Firmware Manual.
9

1.5 Connecting the Camera
1. Use the supplied RJ12 cable to connect the camera lens and the
main body.
Figure 1-10
2. Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided over the network cable.
Status LED
Figure 1-11
The status LED of the camera will be on.
10

Pinhole Camera
11
1
1.6 Loading Factory Default
1. Keep the PoE cable connected to the main body.
2. Use a pin to press and hold the Load default button on the panel.
Load Default
Status LED
Figure 1-12
3. Release the default button when the status LED blinks. This shall
take about 8 seconds.
4. When the status LED fades, the process of loading default settings is
completed and the camera reboots automatically.