GEPRC CineLog30 User manual

CineLog30
User Manual & Setup Guide
V1.0

Contents
Overview:................................................................................................................................... 3
Specification:......................................................................................................................3
Features:.............................................................................................................................3
Warranty Policy:.........................................................................................................................4
PS:....................................................................................................................................... 4
DJI Digital FPV System:............................................................................................................. 5
Bind TBS NanoRX:..................................................................................................................... 6
Bind FrSky R-XSR:......................................................................................................................7
Install Betaflight:........................................................................................................................ 8
Install Drivers:.................................................................................................................... 8
ARM(DJI Transmitter):............................................................................................................... 9
OpenTX Transmitter:...............................................................................................................10
Install Silicone Pad,Landing pad:........................................................................................... 12
Install Propellers:..................................................................................................................... 13
Pre-flight Check:..................................................................................................................... 14
Include:.....................................................................................................................................15
Contact:....................................................................................................................................15

3/15
Overview:
The latest 3-inch Quadcopter developed by GEPRC is officially released now, and two
versions are currently available: CineLog30 VISTA Polar and CineLog30 Analog.
CineLog30 is developed on the basis of CingLog25. It has a stronger power output with
1404-3850kv motor and T3 x 3 x 3 propellers.Ultra light fuselage weight, and CineLog VISTA
Nebula Nano equipped with Naked GoPro Hero 8 Camera and 4S660mAh battery take-off
weight is only 249g.The duration of the flight is 7 minutes.The INSTA 360 GO2 camera also
can be installed by the mounting base.
We pursue lighter weight, better flying feel and more extended functions of the Quadcopter.
Specification:
Model: Cinelog30 Quadcopter
FC: GEP-F411-35A AIO
ESC: BLheli_S 35A
VTX: VISTA
Camera: Caddx Polar
Antenna: CADDX Polar Antenna
Motor: GR1404 3850KV
Propeller: T3x3x3
Frame: GEP-CL30
Motor to Motor: 126mm
Cinelog30 HD Weight: 158.5g
Receiver: PNP，Frsky RXSR ，TBS Nano RX
Features:
1. Small size, light weight, with 4s660mah battery, take-off weight is only 222.5g.
2. Equipped with HD VISTA digital FPV system.
3. The GoPro Hero 8 naked camera and INSTA 360 GO2 camera can be installed, with the
mounting base.
4. Great video shooting effect.
5. 1404-3850KV motor with T3x3x3 propellers, strong power output.

4/15
Warranty Policy:
1. If Quadcopter is damaged or unknow issue,please contact GEPRC and send it back . We'll
do our best to get this taken care of quickly for you.
2. Any impact damage, product liquid damage, high temperature burn or other artificial
damage is not covered by warranty.
PS:
1. All components has been strictly inspected and tested before shipping.
2. If you have any problems, please cooperate with our engineers to figure out solutions.
(E-mail: [e-mail].)

5/15
DJI Digital FPV System:
1. Turn the power of the FPV Goggles, DJI FPV Transmitter,and Quadcopter. Press the FPV
Goggles bind button twice, and it will beep to indicate the binding state.
2. Press the VISTA bind button,the indicator light turn red ,indicating that it is binding.Then
the indicator light turns yellow, means the binding is successful,and the FPV Goggles will
display the received picture.
3. Press the C1 custom button,record button and right scroll wheel button of the remote
controller,at the same time. The indicator light turns blue, and the remote controller sends a
beep indicating that it is binding.
4. Press the VISTA bind button,the indicator light turn red ,indicating that it is binding.Then
the indicator light turns yellow, means the binding is successful.And the remote controller
inducator light turns Green.
Bind Button
Binding successful
Binding
Bind Button
Record Button
C1 Custom
Right Scroll Wheel Button
Binding Successful
Binding
Bind Button
Binding
Binding Successful

6/15
Bind TBS NanoRX:
1. For Taranis X9D/X9D Plus/X9E and Taranis QX7, turn on the transmitter, go to the TOOLS – CROSSFIRE
SETUP – XF Micro TX ,and select Bind.
2. Turn on the receiver while holding the bind button on the receiver, release the button and the green LED
on flash .and then holding the button for 8 second ,and release. And the green light is off and the red
light is flashing, ‘update micro RX？’ will appear on the transmitter screen, and select ‘ENTER’.
3. Wait for the update to complete, the binding is successful, and the receiver green light is on.
1
2
3
4
5
6
Bind Button
Binding
Binding Successful

7/15
Bind FrSky R-XSR:
1. For Taranis X9D/X9D Plus/X9E and Taranis QX7, turn on the transmitter, go to the MENU –
MODEL SETUP – PAGE 2, choose Internal RF, and select BIND.
2. Turn on the receiver while holding the bind button on the receiver, release the button and
the bule,red,yellow LED on .
3. When the red light flashes, it indicates that the binding is successful.Turn off the
receiver,and then turn on the receiver.The blue light and yellow light of receiver are on,
indicating that the link is normal.
1
2
3
Binding Button
Binding
Binding

8/15
Install Betaflight:
Although your Quadcopter comes from the factory nearly completely ready to fly, you still
need to install betaflight to facilitate your subsequent use of betaflight for debugging.
Installation package download address:
https://github.com/betaflight/betaflight-configurator/releases
Enter the web page, pull to the bottom, and select the appropriate installation package to
download. EXE suffix is Windows system, DMG suffix is MacOS system, RPM / DEB suffix is
Linux system, APK suffix is Android system.
Install Drivers:
If you are on windows, you must install the driver manually. MacOS and Linux do not.
CP210x Drivers:
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-dri
vers
STM USB VCP Drivers:
http://www.st.com/en/development-tools/stsw-stm32102.html
Zadig:
http://zadig.akeo.ie/

9/15
ARM(DJI Transmitter):
With DJI FPV Transmitter, the toggle switch is set at the factory. The corresponding functions
of each switch are as follows:
SAAUX1（ARM）
SBAUX2（MODES）
SCAUX3（BEEPER）
SDAUX4（Vacancy）
DJI toggle switches are all three sections. If you move the Yellow cursor of the corresponding
aux channel of the switch, the corresponding function will be turned on when you move to
the set range.

10 /15
OpenTX Transmitter:
The transmitter of openTX system needs to check the AUX channel. For Taranis X9D/X9D
Plus/X9E and Taranis Q X7, turn on the transmitter, go to the MENU –MIXS and view the
current AUX channel settings.
CH1-CH4 corresponds to four channels of rocker
CH5（SF）AUX1（ARM）
CH6（SG）AUX2（MODES）
CH7（SA）AUX3（BEEPER）
CH8（Vacancy）AUX4（Vacancy）
FrSky X9D transmitter SF toggle switch are two sections. If you move the Yellow cursor of the
corresponding aux channel of the switch, the corresponding function will be turned on when
you move to the set range.
Use the transmitter wheel to move the cursor to select the AUX channel, and then press and
hold the wheel key to edit the channel.

11 /15
You can name the aux channel, or set the toggle switches you want, and exit and save it.

12 /15
Install Silicone Pad,Landing pad:

13 /15
Install Propellers:
Although the propeller of cinelog30 are installed in the factory, the direction of the propeller
should be checked before taking off.

14 /15
Pre-flight Check:
In many cases, the cause of a Quadcopter crash is not checked before takeoff. For the sake
of safety, we suggest that you check before every flight.The steps are as follows：
1. Turn on the transmitter and select the correct mode. Please confirm that the arming
switch on the transmitter is in the “disarmed”position and throttle is all the way down;
2. Please perform a physical inspection of the Quadcopter for damage. If there is damage,
please repair first;
3. Please comfirm the propeller is in the right direction and the propeller nut is locked,
otherwise there is a risk of crash;
4. Check LiPo battery voltage. A fully-charged LiPo should be about 4.2 volts per cell, or
about 12.6 volts for a 3S, or 16.8 volts for a 4S;
5. Please comfirm the battery is securely attached to the aircraft by the strap. And secure
the balance lead so that it can’t be struck by the props;
6. Please Scan the flight area for any safety issues that might be present, such as people or
animals;
7. Verify that you have clean, strong video in your FPV goggles or screen. If you see
interference or you see another pilot’s feed, resolve this issue before flying;
8. Arm the quadcopter. Listen for the props hitting anything like an antenna or the battery
wire;
9. At this stage, take off and enjoy flying.
Note: if you choose to fly close to water, please pay attention to the flight safety. It is difficult
to salvage the Quadcopter when it falls into the water, and the water in the Quadcopter is
not covered by the warranty.

15 /15
Include:
1 x CineLog30 HD VISTA Polar Quadcopter
1 x Battery strap 20x200mm
2 x T3x3x3 propellers (pairs)
2 x Propeller guards
2 x EVA damping rings of guards
2 x EVA landing pads
2 x Battery Silicone Pads
1 x Antenna fixed tube
1 x Screw package
1 x TBS receiver mount（PNP）
1 x TBS receiver antenna mount (PNP)
Contact:
Website: https://geprc.com/