GET GCCTV1000BW User manual

Instructions for:
Professional Black and
White CCTV System
GCCTV1000BW
Professional Colour
CCTV System
GCCTV1001C
A
C
B
Explanation of terms used in these instructions.
CCTV Closed Circuit Television
6 pin din Type of connection plug
SCART Type of Socket used on televisions in Europe – VCR units to input/
output of audio and video signals.
Infra-red LED’s Light emitting diodes that work on the infra-red spectrum.
(Invisible to the human eye).
TV Television
VCR Video cassette / recorder
1 way sound A microphone within the CCTV Camera that transmits
sound from the camera position.
Contents
Black and White System
1X Black and White camera
with 4 metres cable and 6 pin
din connector.
1X15 metres CCTVcamera cable
with 6 pin din connector and
SCART adaptor.
1X 6V 350mA DC mains
adaptor.
1X Fixing Kit instructions.
A
B
C
Contents
Colour System
1X Colour camera with 4
metre cable and 6 pin din
connector.
1X 15 metres CCTV camera
cable with 6 pin din connector
and SCART adaptor.
1X 6V 350mA DC mains
adaptor.
1X fixing kit and instructions.
C
B
A
Congratulations on purchasing a GET
Home / Workplace CCTV System. The
camera is compact and designed for
both outdoorand indooruse.The Black
andWhite camera is equipped with Infra
– Red LED’s that allow you to see in
the dark in close proximity to the camera
position. (We recommend additional
lighting to be installed if you wish to
cover a largerarea of view). Colour
Cameras require additional lighting for
night time operation.
We advise that you read these
instructions before installing the system
even though it is a plug in and play
system. The system easily connects to
any standard TV orVCR with a SCART
socket.
It allows you to see and hear events at
the camera location by simply tuning
yourTV orVCR to an AV channel.
The Black and White – Colourcameras
are ideal for monitoring or protecting
your home, place of business or areas
you wish to observe;
+ Door entry
+ Safety of children
+ Car observation
+ Visitors to the premises
Please read and follow these instruction
/ operations so the instalation process
is quick and trouble free foryou.
Keep for future reference.
G
E
T
G T

Tools Required (Not Supplied)
1. 5mm masonry drill (If mounting
camera on a brick wall)
2. Long 12mm dia masonry drill
(If you plan to run camera through
the house wall) or a 12mm wood
bit (If you are drilling through the
wooden door surround)
3. Flexible sealant (To seal gaps
around drilled holes)
4. Small cross head screwdriver
5. Small hammer (To fix cable clips)
Quick set up installation
To satisfy your curiosity we suggest you dry run the connections of the component parts before you start to install the CCTV system.
Follow the diagram connections below.
Planning your system layout
Carefully plan where and how you will position the camera and the route the cable will
take to the television. Select a camera location that provides an unobstructed view of the
area you wish to monitor. The camera cable should be run directly indoors to provide the
maximum protection from being cut.
The cameras are weatherproof to IP45, however if you can protect the camera from the
extremes of weather, i.e. under a porch, then do so.
4 metre cable
Black & white or colour camera
Mains
adaptor
15m cable + Scart adaptor
Back ofTelevision
Scart socket
Change TV
station to AV
channel
Connection to TV
TV remote control
6 pin plug
Twist to point
downwards
and outwards
From camera
TV
VCR
Connection via VCR
with scart socket

3. Mounting and installing the
camera system (continued)
1. Planning yoursystem layout
(continued)
Try not to position the camera so that
it is facing directly at the sun, as this will
affect the picture quality. Rememberthe
changing positions of the sun during
the year.
Note! Colour CCTV cameras have
limited picture visibility in the dark, even
Black and White cameras with infra-red
LED’s have a limited range of view at
night.
We recommend that you install an
outside incandescent 100W lamp ora
small PIR halogen security floodlight to
improve the ambient light and view seen
by the camera at night. We suggest you
install the CCTV system first and see if
the end result is sufficient to yourneeds
/ expectations.
Power jack lead connectors
7. Plug in the 6V350mA mains adaptor
to a 13A 230V mains socket.
Connect the jack plug from the
adaptorto the SCARTadaptor. Now
insert the SCART adaptor into the
SCART socket on yourTV.
8. Turn on the television and adaptor.
Change over the TV to the AV
channel.
8A.Using the TV remote you will be
able to see the camera view at any
time by pressing the AV button.
9. If you are unsure on how to do this
or which function key to press
consult yourTV user guide.
10. You should now be able to see the
camera picture, adjust the camera
view by moving the camera until
satisfied. Tighten the fixing screw
on the camera bracket.
6. Run the cable to the back of your
television, fixing into final position
as you go with the cable clips
supplied.
(Underno circumstances attempt to
cut the cable to remove any excess
you may have. Coil Neatly).
6A. If the SCARTsocket on yourTV/VCR
is being used by another appliance
then you will need to use a SCART
splitter to give yourself a spare
SCART socket for the CCTV camera.
2. Mounting and installing the
camera system
1. Use the bracket of the camera to mark
out locations above head height for
the masonry plugs. Mark a third
position for the cable
entry on a vertical
centre line between
and 15mm lower.
2. Drill all three holes and fit masonry
plugs supplied to the top two holes.
3. Thread the 4 metres of power
cable through the 12mm dia hole.
(Use a flexible sealant to seal any
gaps). Screw the camera to the
location chosen.
20mm
5mm dia
1
2
mm dia
15mm
4. Adjust the camera angle by twisting
the camera up / down and left / right
until you are covering the area to be
observed.
5. Inside the home now connect the
din connectors from the camera and
15 meter lead. The din pin plugs will
only locate in one position, however
care should be taken not to damage
the pins.
UP
DOWN
RIGHT
LEFT

Problems Solution
Picture does not appear. Check that the mains powersupply
is Connected and switched on.
Check that the camera is correctly
Connected to the TV orVCR.
Check that all connections are
correctly made
Check that the TV AV channel has
been correctly selected.
Picture is very white Check that the camera is not
pointing at the Sun or any other
source of bright light.
Picture is too dark Add exterior lighting or move the
camera to cover an area with
increased illumination.
Picture is not level on TV Check the camera is level on
mounting bracket.
Squealing noise can be heard on TV This is electronic feedback and
means the camera is too near to
the television.
Remember your camera has one
way sound so you will be able to
hear on yourTV the sounds from
the camera location.
WARNING
It is an offence underlaw (Data
protection act 1998, Human rights
act 1998) to site a CCTV camera
where it intrudes upon a neighbours
right to privacy or where it overlooks
a public path / area. To stay within
the law for your own protection you
must display the CCTV in operation
sticker supplied, in a prominent
position.
Should you experience any difficulty
with this equipment then please
telephone the helpline provided;
GET SMART Helpline:
0870 6093059
Monday – Friday 9am – 5.30pm
Do not attempt to repairoropen any
part of the system yourself. Repairs
by unauthorised persons will
invalidate the guarantee.
GET products are subject to
continuous improvement, GET and
its subsidiaries reserve the right to
modify the product, design,
specification and prices without
notice or incurring any obligation.
This CCTV system can provide
valuable protection to yourhome or
property. However the camera or
any system linked to it cannot
guarantee protection against
burglary, vandalism or robbery.
The manufacturer, distributor, or
supplier will not be held responsible
forany loss or damage, which may
occur.
Accessories
Questions
Can I connect other makes of camera
to this system?
Can I connect this system to a VCR
A. How do I record the camera views
on my VCR?
B. Can I connect two cameras to
my TV?
Troubleshooting
Answers
No, only GETcameras and CCTV
equipment are compatible with this
system. (Please consult the GET
SMART helpline)
Yes, but theVCR will not automatically
record the cameras views.You will
have to set this up manually.
Select the channel on yourVCR that
is tuned into the CCTV system and
record as normal.
Yes. You will need to use a switched
multi-scart splitter.To view the camera
picture you will need to select the
switch / camera required on the
SCART splitter and change the TV
over to the AV channel.
WARNING
CCTV
Cameras are in
operation
GET PLC, Key Point 3 – 17 High Street,
Potters Bar, Herts. EN6 5AJ England.
GET SMART HELP LINE
TELEPHONE:
(0044)(0)870 609 3059
Scart splitter
GCCTV101555
Extension cable
GCCTV101310MXL 10 Metres
GCCTV101415MXL 15 Metres
G
E
T
G T
AR095-010605