7
Enable Smart Feedback and set your weight target, to have QardioBase display
facial expressions indicating your progression of your weight and body
composition data towards your target.
6. If you would like to connect QardioBase to your Wi-Fi network, follow the
instructions on the screen of your phone or tablet. To connect QardioBase to your
Wi-Fi network you will need to know the following information:
Wireless network name (SSID).
WEP / WPA / WPA2 password (if applicable).
If you do not know this information, you can refer to the manufacturer of
your wireless router or contact your Internet service provider for
assistance.
IMPORTANT: QardioBase is safe to use by individuals that are 10 years old
or older, however pregnant women should use QardioBase in “Pregnancy
Mode” or “Weight-only Mode”, and people fitted with an implantable medical
device should only use QardioBase in “Weight-only Mode”, which disables the
body composition analysis. Do not use this product before first activating the
“Weight Mode”, if you have implanted electronic medical devices, such as
pacemakers or defibrillators. Please refer to the instructions of the
manufacturer of your implanted medical device for further information.
1. 7. After setup is complete, you can step on QardioBase to perform a weight
measurement. By default, weight will display first, followed by % body fat. If
you have shoes or socks on, or if you have Weight-only Mode or Pregnancy
Mode on, QardioBase will only display your weight. The Qardio App will