Getting started
09
10
Pairing
Power on the Gg03
Long press the MFB , then you will hear a power on melody and the blue indicator will quickly flash
twice. You could start the operation now.
Note 1:
The first time the Gg03 is turned on, it might automatically be ready for pairing.
Note 2:
Long press: It refers to press and release and the duration is more than 3 seconds. After long press,
you should hear 1 long beep.
Short press: It refers to press and release and the duration is less than 1 second. After short press,
you should hear 1 short beep.
Power off the Gg03
Long press the MFB , then you will hear a power off melody and the red indicator will quickly flash twice.
Pairing the Gg03 with your phone
Pair the Gg03 with your phone by adding it to the list of paired devices in your phone. The Gg03
should be paired once with your phone before use. The two devices then recognize each other
when they connect. You do not need to pair it again until you want to use the Gg03 with another
device or the pairing information is deleted from your phone. It is recommended that the distance
between the Gg03 and your phone is as close as possible with no solid objects in between.
1. Put the Gg03 enter pairing mode by long pressing the Volume up button . You can see the
blue indicator and the red indicator cross blink per second, now the Gg03 is waiting for pairing
now. You can only put the Gg03 into pairing mode when it is in standby mode (please refer to
the LED indicator chart).
2. Perform a "Bluetooth device discovery" from the mobile phone.
