Ghent Nexus NEX223MMP User manual

PARTITION ASSEMBLY INSTRUCTIONS
Models
NEX223MMP and NEX224MMP
IS-NEX22XMMP 2/18

#10 X 1 1/2" PAN HEAD
TAPPING SCREW
4 EA.
#10 X 2 1/2" PAN HEAD
MACHINE SCREW
5 EA.
#12 X 1" PAN HEAD
MACHINE SCREW
8 EA.
(HOOK)
www.nexusbyghent.com - Lebanon, OH - 800-543-0550
1
RECOMMENDED TOOLS:
CORDLESS DRILL - 12 VOLT OR BETTER
#2 AND #3 PHILLIPS SCREWDRIVER BITS
SCREWDRIVER BIT EXTENDER

Before discarding the packaging, inventory the components
and fasteners. (Some may be taped to the foam packaging.)
FASTENERS AND HARDWARE
MARKER/ERASER
HOLDER
1 EA.
TABLET HANGER
(WITH HOOKS)
2 EA.
TABLET HANGER
2 EA.

CROSS RAIL
1 EA.
FOOT ASSEMBLY
2 EA.
TABLET HANGER
2 EA.
MARKERBOARD
1 EA.
SIDE POST
2 EA.
TABLET HANGER
(WITH HOOKS)
2 EA.
EASEL AND IDEAWALL
COMPONENTS
2
www.nexusbyghent.com - Lebanon, OH - 800-543-0550

#10 X 1 1/2" PAN HEAD
TAPPING SCREW
(4 PLACES)
USE #2 DRIVER BIT
TABLET HANGER
BRACKET
(WITH HOOKS)
#10 X 2 1/2" PAN
HEAD
MACHINE SCREW
(4 PLACES)
USE #2 DRIVER BIT
2x
TABLET HANGER
BRACKET
2x
www.nexusbyghent.com - Lebanon, OH - 800-543-0550
3
1.
Loosely attach the markerboard and
the accent panel, with rails, to the
side posts as shown.


INSTALL WITH
CHANNEL SIDE FACING
DOWN
#12 X 1" PAN HEAD
MACHINE SCREW
(4 PLACES)
USE #3 DRIVER BIT
WITH A BIT ENTENSION
#12 X 1" PAN HEAD
MACHINE SCREW
(4 PLACES)
USE #3 DRIVER BIT
www.nexusbyghent.com - Lebanon, OH - 800-543-0550
4.
Attach the feet assembly to
the side posts, as shown.

ASSEMBLE THE FEET ASSEMBLY ON A
FLAT SURFACE, SO THAT THE CASTERS STAY LEVEL.
3.
Attach the foot
assemblies to the cross
rail, as shown.
4
5.
Tighten all screws to complete the assembly.