Ghent Nexus Series User manual

EASEL AND IDEAWALL ASSEMBLY INSTRUCTIONS
Models
NEX203ME-CM, NEX203ME-EM,
NEX203ME-PM, NEX203ME-SM,
NEX206MW-CM, NEX206MW-EM,
NEX206MW-PM, NEX206MW-SM IS-NEX20XMX 7/12

and fasteners. (Some may be taped to the foam packaging.)
www.nexusbyghent.com - Lebanon, OH - 800-543-0550 1
#2 AND #3 PHILLIPS SCREWDRIVER BITS
SCREWDRIVER BIT EXTENDER
RECOMMENDED TOOLS:
CORDLESS DRILL - 12 VOLT OR BETTER
Before discarding the packaging, inventory the components
FASTENERS AND HARDWARE
#10 X 1 1/2" PAN HEAD
TAPPING SCREW
4 EA.
#10 X 2 1/2" PAN HEAD
MACHINE SCREW
5 EA.
#12 X 1" PAN HEAD
MACHINE SCREW
8 EA.
2 EA.
TABLET HANGER
(WITH HOOKS)
(HOOK)
TABLET HANGER
2 EA.
MARKER/ERASER
HOLDER
1 EA.

TABLET HANGER
2 EA.
2 EA.
FOOT ASSEMBLY
CROSS RAIL
ACCENT PANEL RAIL
1 EA.
(REFERENCE)
CHANNEL
1 EA.
ACCENT PANEL
.
1 EA
2 EA.
SIDE POST
MARKER/ERASER HOLDER
2 EA.
(WITH HOOKS)
2 EA.
TABLET HANGER
SIDE POST ACCESSORY
MARKERBOARD
1 EA.
2
COMPONENTS
EASEL AND IDEAWALL
www.nexusbyghent.com - Lebanon, OH - 800-543-0550

TABLET HANGER
BRACKET
2x
BRACKET
TABLET HANGER
(WITH HOOKS)
#10 X 2 1/2" PAN
HEAD
MACHINE SCREW
(4 PLACES)
USE #2 DRIVER BIT
2x
#10 X 1 1/2" PAN HEAD
TAPPING SCREW
(4 PLACES)
USE #2 DRIVER BIT
 REFERENCE:
SCREW HOLE
2.
www.nexusbyghent.com - Lebanon, OH - 800-543-0550 3
Loosely attach the markerboard and
the accent panel, with rails, to the
side posts as shown.
1. Insert the accent
panel into the accent
panel rails.

DOWN
INSTALL WITH
CHANNEL SIDE FACING
#12 X 1" PAN HEAD
MACHINE SCREW
(4 PLACES)
USE #3 DRIVER BIT
WITH A BIT ENTENSION
rail, as shown.
www.nexusbyghent.com - Lebanon, OH - 800-543-0550
ASSEMBLE THE FEET ASSEMBLY ON A
4.

the side posts, as shown.
Attach the feet assembly to
FLAT SURFACE, SO THAT THE CASTERS STAY LEVEL.
3.Attach the foot
assemblies to the cross
4
ATTACHING THE FEET ASSEMBLY.
SLIDE THE MARKER/ERASER
ACCESSORY CHANNEL
HOLDER INTO THE SIDE POST
BEFORE

#12 X 1" PAN HEAD
MACHINE SCREW
(4 PLACES)
USE #3 DRIVER BIT
HOLE
ORIENTATION

#10 X 2 1/2" PAN HEAD
MACHINE SCREW
USE #2 DRIVER BIT
5. Slide the marker/eraser
holder up into position above the
accent panel and attach with the screw
as shown.
6. Tighten all screws to complete the assembly.
6
www.nexusbyghent.com - Lebanon, OH - 800-543-0550